How to Make a High-End Butcher Block

  Рет қаралды 128,099

Lee Valley Tools

Lee Valley Tools

Күн бұрын

Пікірлер: 61
@TonyfrigginD
@TonyfrigginD 28 күн бұрын
It always amazes me how good woodworkers keep everything so clean and neat...meanwhile I have glue all over my hands and tools all over the place.
@honza846
@honza846 17 күн бұрын
Nic si z toho nedělej, já to mám stejný
@RiverHayes
@RiverHayes Жыл бұрын
Very nice work on the block. Also, fantastic camera setup, video editing, audio mixing, and music. Top notch production.
@zlvirag
@zlvirag Ай бұрын
great presentation...simply explained, no gimmicky add ons, and best of all, Ill be heading down to shop tomorrow to build one......thanks.....
@karlvanlith878
@karlvanlith878 Жыл бұрын
Thanks for the Video David, I enjoyed the professional tips.
@1qazandrew333
@1qazandrew333 Жыл бұрын
Great video. Good tunes too.
@karloditomasso
@karloditomasso Жыл бұрын
un québécois et sa parrait comme moi génial merci pour les super conseil
@jeramish13
@jeramish13 Жыл бұрын
This guy is great
@omarikai
@omarikai 7 ай бұрын
Brilliant. Thank you
@babydragon25
@babydragon25 4 ай бұрын
Can you use a hand planer if you don’t have all the tools to do this? I’m lacking a lot of these tools.
@dreamingofbears
@dreamingofbears 4 ай бұрын
With a little bit of elbow grease! Give it a shot
@krissk77
@krissk77 Ай бұрын
Yes... u can... you can with hand tools... before these machines were invented, woodworking was hand tools. 😊
@Arational
@Arational 6 ай бұрын
It would be nice to show the process of making an end grain cutting board with limited equipment, perhaps equipment sold at your stores. Not many people have access to a $50,000 sliding table saw or a $10,000 drum sander.
@daveklein2826
@daveklein2826 6 ай бұрын
Stop whining and figure it out
@johnhurney6495
@johnhurney6495 2 ай бұрын
Nice work! How thick are your cutting board strips?
@craighamilton2690
@craighamilton2690 Жыл бұрын
What are the dimensions of the starting material and the finished product?
@jameslovering9158
@jameslovering9158 2 ай бұрын
High-End machine shop as well
@boree-3-
@boree-3- 2 ай бұрын
Hello, for the first time, we made a mistake and did not know much about wooden cutting boards, so we purchased a John Booth cutting board from the Williams Sonoma website. The cutting board was wrapped in a layer of plastic in the box, and the oil was moving around and damaging it. The problem is that the packaging is poor, and the cutting board surface is completely covered in dead skin cells. If you wash it with water, clean it with baking soda, dry it, and apply oil, dead skin cells will form and the surface will become rough. Is this correct? It's not because you don't know, right?
@jakeh6806
@jakeh6806 2 ай бұрын
It is not covered in dead skin cells that you can see. If you are seeing a white film on type that is excess oil and or wax that is drying/curing on the surface. Just wipe it well with water and let it dry overnight. If it feels rough the next day that is the fault of the builder because they didn't raise the wood grain first before the final sanding. Unless you have an orbital sander, I would just return it. It sounds like a poor quality cutting board.
@garyassarian1711
@garyassarian1711 8 ай бұрын
what are the dimenisionS?
@blayne2029
@blayne2029 Жыл бұрын
Interesting. But it would have been more helpful if the guy had used regular tools found in most people's shops.
@daveklein2826
@daveklein2826 6 ай бұрын
Stop whining and figure it out
@blayne2029
@blayne2029 6 ай бұрын
stop being a dick... figure out how.
@tomdicker299
@tomdicker299 3 ай бұрын
Using free plans online you can build your own shop machines. I built a thickness sander and a very good edge sander for about 1/4 of the cost of retail machines. It just takes a little time and attention to detail.
@rollingstone3017
@rollingstone3017 Жыл бұрын
Wow. All I need is $20k worth of machines and I can make a butcher block.
@robsik888
@robsik888 Жыл бұрын
Yeah, I'm pretty sure that anyone who already owns a wide-belt sanding machine already knows how to do this project.
@Dunc2222
@Dunc2222 Жыл бұрын
🤣 Exactly!
@kz.irudimen
@kz.irudimen Жыл бұрын
You could grab any type of saw and a drill and go make something, but you'd rather complain in youtube comments about what other people do
@Cuchulainn42
@Cuchulainn42 Жыл бұрын
LoL yup
@danielfly3871
@danielfly3871 Жыл бұрын
Yeah it says high-end block not beginners.
@poison113245
@poison113245 9 ай бұрын
Its hilarious that Lee Valley doesn't even know to clamp from both sides to prevent cupping.
@loganfletcher5797
@loganfletcher5797 Ай бұрын
He clamps from both sides on the final glue up
@Thundermuffin93
@Thundermuffin93 22 күн бұрын
Not much chance of cupping here....
@garym2879
@garym2879 11 ай бұрын
Music is irritating.
@daveklein2826
@daveklein2826 6 ай бұрын
So are you
@garym2879
@garym2879 6 ай бұрын
😘
@jerseycornboy
@jerseycornboy Жыл бұрын
Don't worry about bacteria, soap and and sponge takes care of all that junk. The cutting board should last multiple generations. Don't ever use a serrated knife ever in your life. Learn how to sharpen a kife takes 30 seconds for razor sharp edge.
@danielbussieres2399
@danielbussieres2399 3 ай бұрын
Tu aurais été mieux de le faire en français….
@derpiper25
@derpiper25 6 ай бұрын
great! All you hobby woodworkers need is about $50k (minimum) for tools and you too can make $200 cutting boards. Come on Lee Valley. Get real!!!!
@daveklein2826
@daveklein2826 6 ай бұрын
Stop whining and figure it out
@danvanhoose6783
@danvanhoose6783 11 ай бұрын
Music ruined it.jeez.
@daveklein2826
@daveklein2826 6 ай бұрын
Music is perfect
Making White Oak End Grain Cutting Boards
15:00
BrianCNC
Рет қаралды 23 М.
How to build a butcher block table out of 2x4
14:45
Im Making It
Рет қаралды 557 М.
번쩍번쩍 거리는 입
0:32
승비니 Seungbini
Рет қаралды 182 МЛН
Andro, ELMAN, TONI, MONA - Зари (Official Music Video)
2:50
RAAVA MUSIC
Рет қаралды 2 МЛН
#behindthescenes @CrissaJackson
0:11
Happy Kelli
Рет қаралды 27 МЛН
I turned this into a $500 butcher block
10:11
MWA Woodworks
Рет қаралды 762 М.
10 COOL Homemade Tools that you really need !!
23:55
Start Making (Woodworking)
Рет қаралды 319 М.
How to make this horizon end grain cutting board
10:45
LIA Woodwork
Рет қаралды 6 М.
Turning a Barrel into a Butcher Block
22:58
Ryan Hawkins
Рет қаралды 3,1 МЛН
3 LEVELS of Cutting Boards - Beginner to PRO Build
15:48
John Malecki
Рет қаралды 1,5 МЛН
I Build 3 Cutting Boards - 5 Min vs. 5 Hour vs. 5 Day
34:14
John Malecki
Рет қаралды 3,2 МЛН
Building a Butcher Block Table out of Scrap Wood
13:20
The 3D Handyman
Рет қаралды 148 М.
Ash Butcher Block | Woodworking
8:42
Elias Klingvall
Рет қаралды 223 М.