Bathroom Remodel | Epoxy Countertop | Game Changer!

[@tonybruno9897]

I've seen tons of products. IMO your kits are way better. No heat gun or torch needed. Any product that gives you high quality results and reduce the amount of steps to achieve that result is a WINNER. 👌👌

[@LeggariProducts]

Thanks Tony for watching the videos

[@harpoon_bakery162]

why no heat gun or torch , won't the bubble be there

[@speakonit3]

I really want to try this for our new kitchen counters. Is there a video on how to prep it fully?

[@monicaferreira6187]

One of the best videos about countertops 👏🏻👏🏻👏🏻

[@phuongkern8027]

I would like to know if you ever epoxy the sink. Thank you 🙏

[@joelmabrey2569]

I see you have pulled the sinks out. My counter and bowl are all one piece . The bowl is made with the counter. Will this hold up inside the bowl also ? I hope I explained that so you can understand it. You did an amazing job sir !

[@LeggariProducts]

email [e-mail] and they will walk you threw your options thank you!

[@judit3191]

Do you clean your brush those 20 minutes while you dont use it so it doesnt harden?

[@jancourse6224]

I watched you do another example and after you put other colours on the board you. Marbled it and then you spritzed it. My question. What was in the bottle of spritz. I love these products.

[@DzzPalestine31]

Hello, what kit would be on the site to reproduce this marble? THANKS

[@MonroeSmithManor]

What colors are used here??? This is lovely!

[@LeggariProducts]

That looks like our white base with silver and titanium highlights.

[@MonroeSmithManor]

Leggari Products I was hoping you said that!!!

[@ginaloppnow7497]

Awesome, I willing to try this in our bathroom. However, what do u do if ur not replacing the sink ?? How do u do this without it caking up around the sink?

[@LeggariProducts]

Just tape around the sink and use either a paint brush or a roller to work around the sink.

[@sharonshelby5914]

We have a counter with mirror just like this (but with square edge instead of decorative on the backsplash). @Leggari can you tell how long you waited to pull the tape and if there were any issues with the epoxy between the backsplash and the edge of the mirror?

[@LeggariProducts]

Always caulk the backsplash so no epoxy gets down there. As far as the tape anywhere from 30 min to 2 hours depending on temp and how long it took you to pour. You just want to pull down the tape and have that resin just barely be moving down that edge.

[@stevenarmer8245]

Hey Cooper you guys need to check out Leggari epoxy kits. They are really awesome. I believe much easier than the kit you guys are using. Maybe if u plan on doing kitchen countertops or anything sometime. Your's turned out pretty nice too, great job.

[@kingreno35]

Did you guys use a drop-in or under mount sink after it was cured

[@harpoon_bakery162]

do you not have to take a torch to the top on this? Is this stone-coat countertops or is it your own formulas?

[@LeggariProducts]

This is our own Leggari Formula💯 Our epoxy is chemically formulated to push self-level and push air bubbles to the surface. The first thing we spray is 91% or higher isopropyl alcohol; this creates cells in the design and disperses the epoxy. Once that evaporates, we spray denatured alcohol to pop micro bubbles. This allows us to avoid torching the epoxy. Check us out here 👉 leggari.com

[@brendaallred944]

I have almost completed my redo on the bathroom vanity top, but, without thinking I also kilz my bowl and then painted the bowl as well, but I have not put the coats of polyurenthen on it, is it too late to remove the colors in the bowl?, I used acrylic paint, but used oil base kilz, I thought I would ask someone before i put the final coats on bc I truly didn't know if I should leave the bowl original plain color or could make it blend in with the countertop? help

[@cricketberry]

Totally inspired, I knew I wanted to do this on my bathroom countertops and this is exactly what I want to do. Thank you for sharing, you are amazing.

[@LeggariProducts]

You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Custom Counter Kit Here, then the link order Countertop kit, then follow the steps.

[@cricketberry]

@@LeggariProducts I am on it yes and I didn't know from this video if I needed a top coat, emailed and got a quick reply that yes, it's best to use the top coat, is that your view on a bathroom counter top too? It looks so durable to me already.

[@candycoatedcyanide3267]

I think this is the best up cycle idea ever 😊👍

[@LeggariProducts]

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

[@darlenemckim3981]

Which kit is this? I'd like to see something similar, but with the base as black pearl, then using highlights of white along with a champagne highlight. Does Leggari have a recommendation on what to use to get the champagne highlight looking. I'm wanting to do my kitchen in the near future, and considering this mix of colors.

[@eaglenine1044]

Can you spray paint the bowls of the sink with matching colors and then put clear epoxy over it?

[@LeggariProducts]

The epoxy will not adhere to the spray paint. You would need to sand the surface with 80 grit then clean with denatured alcohol and apply our primer and epoxy.

[@yvonnemariehuth9638]

Wow that looks absolutely amazing

[@LeggariProducts]

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

[@richardwade511]

This looks so awesome... but I learned the backsplash is a pain in the ass!!!

[@Dylan_Marshall]

Best way is to take the backsplash off if you can and do it flat so gravity is on your side.

[@jabig1]

That counter top is made of which material??

[@LeggariProducts]

This was a laminate countertop. Take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043

[@deewill6663]

So the question I have is - How durable is this type of counter top in the kitchen? What if I sat a hot pot on top of it accidentally would it melt through the epoxy?

[@mermaiddiyartist8119]

Dee Will they did a video. Theirs is the only epoxy that’s high temp resistant

[@Belfast-lk8lx]

Great video, thanks!

[@LeggariProducts]

Thanks for watching!

[@suebrooker9273]

I've been wanting to do this so bad, I have a table that I did way back when. I wish I would of seen this video. It would of looked so much better. But it was still good. Now I have a table for the dining room. It has veneer on it that has came off here & there. Do I need to sand it down, or will your product fill in the gaps?

[@LeggariProducts]

You will either want to sand it down flush or patch it with multi purpose bonds then sand the surface with 80 grit then you can apply our product. Thanks

[@suebrooker9273]

wow what quick response, I'm saving this for when I'l ready to give it a try Ty So Much Sue @@LeggariProducts

[@ultramaga3359]

I guess you have no issues with air bubbles ? If so what do you recommend....heat ?

[@Deltadivaix]

Blow torch.

[@Tamz2070]

Do you have to take out the sink?

[@LeggariProducts]

No, you can elevate the sink up off the counter surface about 1/2” by lifting the sink up a bit and rolling a couple markers underneath it. That way you can get the coating under the sink and it’ll look clean when you drop it back down. Thanks

[@tishharris3199]

Can you show doing shower walls? I have a 3 x 5 shower in my master bath, in the house we're having built. This is the kind of customized work I want done in it! Are there any videos of showers being treated?

[@LeggariProducts]

They are coming out with a vertical epoxy later in the year where you can coat shower walls. Stay tuned. Thanks

[@bobhosie5537]

Hi. Nice Stuff. Just wondering if I could do this as a contractor. Is it really expensive ?

[@LeggariProducts]

Yes you can, you can email [e-mail] and they can send you over the contractors pricing.

[@nickg3794]

Top looks really good! Backsplash is OK. Looks really challenging. Have you guy messed around with letting the epoxy dry more than the top before putting in the color? Seems having to constantly drag thru the epoxy due to drips/gravity makes it appear much different than the top. I have no idea myself.... just thinking out loud...

[@LeggariProducts]

You want to apply the highlights immediately after you do the base coat of epoxy so you can swirl the highlights in while the epoxy is still wet.

[@Reaper21O]

The backsplash looks really hazy it just doesnt match the countertop. Is it necessary to go over so many times with the brush?

[@LeggariProducts]

Yes its is a lot thinner on the faces and can appear to be hazy if it is over blended!

[@luamada2002]

Question. Do you guys use the torches or heat gun to get ride of the bubbles?

[@LeggariProducts]

We have a high end epoxy that has an additive in it to make the bubbles rise to the surface and pop on their own. Thanks

[@karensprague9459]

What kit is used here? This is exactly the colors we've been looking for

[@LeggariProducts]

I believe this is a white base with silver highlights. This picture is on the website at leggari.com and under the gallery in the countertop section just hover your mouse over the picture and not click on it and it will tell you the color combination.

[@yolandareed6915]

Would a top coat be necessary for this project or can you leave it as is? It is beautiful!

[@harpoon_bakery162]

I don't know

[@genevievedickman5910]

Can you do this into the sink if it’s all the same material?

[@LeggariProducts]

This is not a good application for a sink because of the vertical surfaces, the epoxy will just run. Thanks

[@cherrel6991]

Can this be used over granite

[@LeggariProducts]

Yes you can apply over granite, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043

[@juliescheier5016]

Can you do this over a wooden topped island?

[@LeggariProducts]

Yes you can, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043

[@tootsiea4064]

This is really awesome and turned out beautiful! You make it look so easy. Thank you for making a video. I've been contemplating doing my countertops but I'm scared. I have a knack for painting and diy crackling and distressing but have never worked with epoxy.

[@LeggariProducts]

We made the process for DIY'ers through our tutorial videos on our website that show you step by step the process. Thanks

[@hotflash8044]

Will this work on ceramic tile kitchen countertops and backsplash?

[@LeggariProducts]

Yes it can be put over tile, but you need to fill all your grout seams with multi purpose bondo from Home Depot, then sand it smooth, this will scuff up your tiles also, then wipe it clean with denatured alcohol then you are ready to apply our epoxy. Take a look at the tutorial below. Thanks kzbin.info/www/bejne/nWmqq6aCZdCjpNU

[@smarahacademy3587]

What did you use in the beginning. ?

[@jupru220]

Hi - the look is beautiful. I always loved the look of epoxy countertops. But, a few years ago, I was looking at homes to buy. I went into a home that had a lot of epoxy in the kitchen. Of course it was dry, but the chemical smell was overwhelming to me. I couldn't get out of the house fast enough. Was something done wrong at that home, or is epoxy always that strong of an odor? That's what made me turn away from epoxy because of that strong chemical odor. I was concerned that the epoxy odor could be toxic. I'm not saying it is, it just smelt that way. What are your thoughts on the strong chemical fumes? Thank you. Epoxy is beautiful, but I can't stand the smell.

[@dabneyoffermein595]

until it dries (fully cures in a few weeks). you won't smell a thing.

[@ladyofneener474]

I would like to see a shower and bath fiberglass stahl with tub, three sides and a top. I need to do mine and have no clue how to overcome this challenge. Please help!

[@LeggariProducts]

The epoxy is not a good application for a vertical surface because the epoxy will just run. They are coming out with a vertical epoxy later in the year. Thanks

[@ladyofneener474]

Leggari Products thank you. Once it becomes available... I am in Daytona Beach Fl. I Would buy you a ticket to the Race of your choice, put you up and feed you if you would want to make a video doing one. :) I want to order some soon to give it a try at an older mobile home that is at a family farm. 2 baths and a kitchen counter top. It will be a good place to do my first practice run.

[@Verngas]

How long do you wait before you pull the tape?

[@casperr1299]

I’m not sure about this one but most videos I’ve seen says it takes anywhere from like 8hrs to a couple days to completely dry. I’m assuming it depends on how think you layer it on and stuff

[@rhondaodden4286]

What colors did you use?

[@salimal-obeidany7603]

Great work 💯/💯

[@3dandyrandy3]

Is that a 2 part 1to1 epoxy ? What is the counter top made out of?? When does the tape come off.???

[@alfredemerson1139]

I asked the very same question......

[@LeggariProducts]

The epoxy is a 2:1 ratio, the countertop is made of laminate and you can take the tape off the next day. Thanks

[@3dandyrandy3]

@@LeggariProducts How does the tape pull off of cured epoxy,, now plastic? I usually pull it off at a heavy gel state. I'm using epoxy on surfboards - windsurfing repairs.

[@3dandyrandy3]

@@LeggariProducts Is the counter melamine?

[@alwynthegreat]

Randy DWB i would've thought its a different resin, one that you use catalyst also the gel coat would be uv protected. I made myself a surf board from a plug donkey years ago, could be wrong

[@wisamjumaa8936]

what is the type of white paint you are pouring? ... thanks

[@LeggariProducts]

We use metallic powder we add to the epoxy to color it. Thanks

[@fd8133]

Is this laminate countertop? I have laminate and sink for drop in someone had me get I hope it will work

[@muhammadzaman7317]

What about counter top with curved edges. Never seen a video with round edge. Can it be done on counter top with round edge??

[@nicelysentertainment9716]

I know this might sound dumb but I’ll ask anyways. Do you think you can use this product on a old car or motorcycle?

[@LeggariProducts]

We don't recommend using this product on a vehicle because being in the elements outside it might not do well. Thanks

[@richardparker3150]

Beautiful counter top. Love your work. Simply fantastic.

[@LeggariProducts]

Thanks Richard

[@tonymak9213]

What do you do if the back splash or front edge ends up with a run or brush mark ? Can it be sanded down and polished? Does the backsplash and edge have a super smooth surface when dried similar to the flat surface, or does it look like a brushed painted finish ?

[@funferthefam]

My understanding is that it is self leveling, so it will turn out smooth. Should not end up with brush marks.

[@harpoon_bakery162]

i don't believe you sand this type of surface unless planning to paint it.

[@texasoveragesllc2041]

Before you added the primer coat did you have to do any surface prep?

[@jadchagoury1066]

Brandon Raynes sanding would b a good idea

[@AnimatedBeauty]

How would you recommend doing a vanity with a built in sink?

[@LeggariProducts]

You can email [e-mail] and our techs can help you out.

[@rachellaylee3425]

How much is the average cost per square foot for your kits and how do you order as a diy home owner. I'm also curious if it would hold up in an RV with the jostling going down the road. I want to do both my floors and counter/ horizontal surfaces.

[@dawncoppock5180]

Without anything covering this after you lay it down how do you keep particles that fly around in the air from going in it? Ive put epoxy down on the counters and I always have stuff that end up on the countertop from the particles that are flying around.

[@Grizzleback07]

Only thing I can think of is to make a "tent" from plastic sheeting and turn off the vents or any air vent. Painters do this when they have to do an outside paint job. Kinda like a makeshift paint booth.

[@tubbybear2912]

Guys can this stuff be delivered to Scotland?

[@Ritercrazy]

Beautiful job.

[@LeggariProducts]

Thank you

[@llibeel]

Looks good every time.

[@LeggariProducts]

Thank you

[@tinno1329]

Hi Leggari !! I am from Asia , I see you guys making me love and want to do it too. And I don't know what kind of paint do you use ? I wonder if it's a wall painting or car paint or wood paint ? I look forward to your help , thank you very much.

[@LeggariProducts]

We use metallic powders that we add to the epoxy. Thanks

[@Army20Veteran20]

I'm trying to promote your product here in Dallas and Houston, Tx. Haven't purchased it yet, but I'm looking forward to trying it soon.

[@LeggariProducts]

Thanks Edward, take a look at our brochure. online.flippingbook.com/view/364043

[@sosaprime6615]

Chido

[@JackA2430]

I didn't see you finish the inner rim of the sinks? Was it just run off and not brushed in?Other wise it was a good video.

[@jadchagoury1066]

Lino P inner rims won’t show after installing the sinks

[@dabneyoffermein595]

so no torch necessary?

[@nwalker2619]

Doesn't look like it

[@dabneyoffermein595]

@@nwalker2619 thanks mate! bloody well done Leggari

[@maggiebella6466]

Hello ,can you apply epoxy on top of a glass made vanity ? Thanks

[@LeggariProducts]

The epoxy is not a good application for going over glass or stainless steel. online.flippingbook.com/view/364043

[@tooshay7396]

What do you clean your brushes with?

[@LeggariProducts]

We usually throw them away, but you can clean them with denatured alcohol. Thanks

[@edmundoimperial449]

What is that metallic base?

[@LeggariProducts]

They used pigmented white epoxy for the base coat for the countertops. Thanks

[@sophisticatedglamzgals5687]

Hi, I would like to order some of your products, but I can’t select the product I want on the website.

[@rayyy1284]

Bonjour super jolie un temps de séchage entre les 2 étape svp

[@LeggariProducts]

Apply epoxy within 2 hrs of applying primer. Apply topcoat within a day after epoxy is applied.

[@Paula-po9kx]

Turned out beautiful but the music is terrible!!

[@LeggariProducts]

Thanks for watching

[@tiddlesa.6125]

I liked the music

[@Tomes23]

Tiddles A. I didn’t mind it either. I have always enjoyed Muzak.

[@mikewilson4141]

Can you use some Red, Gold and Black ? Would like to use this method for my office area desk’s

[@LeggariProducts]

You can order a sample kit and email [e-mail] with these colors and they will send it in your kit. Thanks leggari.lpages.co/sample-kit-ad/

[@rosemaryestachia1007]

Hi. It's nice. It look easy to do. I like do it my self in my kitchen

[@angie-kbm]

So pretty! Going to do this for sure.

[@LeggariProducts]

You can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Order Counter Kit Here, then follow the steps.

[@FALLONandTheFiveFurryBabies]

This is just stunning and I am so jealous as I would love to have you do this for my bathroom!!! Do you live in Canada by chance lol I was so nervous when you started rolling out the grey but then I was like OMG it looks gorgeous! I need this product!

[@LeggariProducts]

We made the process for DIY'ers through our tutorial videos on our website that show you step by step the process. You can email [e-mail] and they can help you with an order. Thanks

[@jesusgeneration6666]

@@LeggariProducts im interested.plz

[@watchlater4825]

Is it possible to use your epoxy product on an old tub?

[@LeggariProducts]

This is not a good application for vertical surfaces because the epoxy will just run and be thin. They are coming out with a vertical surface epoxy next year. Thanks

[@dragonballforever7739]

from what I se its puted on playwood, what kind of protection against moisture in bathroom epoxy will give me specialy that You didn t cover sink round holes whit epoxy in my opinion water will easy get ther

[@LeggariProducts]

After you put the sink back in you are going to want to seal around the sink and yes the epoxy is water resistant. Thanks

[@dragonballforever7739]

@@LeggariProducts yes ofc You need seal it but water will always transfer on outer side from temp difrence if sink is stainless I think so ? than playwood whitout epoxy will absorb it preaty quick?

[@fredbush3404]

After the kitchen then our Master bathroom and guest bathroom.

[@LeggariProducts]

Awesome sounds like you have a lot of projects. Take a look at our brochure. online.flippingbook.com/view/364043

[@freedomtrailamerica2981]

Try feather on backsplash?

[@LeggariProducts]

That would be a really cool look, thanks for the advise.

[@SW-up3ei]

Can this paint on culture marble?

[@LeggariProducts]

Yes you can, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043

[@lauracrismond7904]

The backsplash looks like you put the brush though it. You need to make your brush strokes up and down along with the striking.

[@LeggariProducts]

Thanks for the tip!

[@Tortuga89R]

Tip for Leggari: Product list with links including colors and all products used in each video. Thanks! Love your videos otherwise.

[@annhickox2019]

So what I understand you used white Apoxsee paint and what was the name of the stuff you used to make the marble look?

[@hazeljulezf1026]

Where can I order this kit ? I don’t want the sample n that’s all I’m seeing when I click on the link in the bio

[@LeggariProducts]

www.leggari.com is where you can purchase a kit!

[@haposan1971]

Hi, do you have store in Indonesia, we would like to buy this product, it seems interesting, if you have store available in Indonesia please let us know, thanks

[@PerfectPicture2012]

Leo Nardo you can buy online

[@goldenv460]

Hi how can I purchase this exact kit for my kitchen countertop I want this one ,

[@LeggariProducts]

That is pearl white with titanium highlights. You can order this on our website at www.leggari.com. Thanks

[@dedirdam6334]

GOLDEN V i

[@jellybeann83]

@@LeggariProducts looking on the site. I dnt see pearl white, just white.

[@ol59kafer92]

Looks great I wish I would have seen this before I put my house on the market for sale, I probably could have got more money for the house

[@LeggariProducts]

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

[@thisdollslifejenna3841]

Awesome ×'s a million!! Your videos have definitely given me the courage to do this! Thanks!

[@LeggariProducts]

Thanks Jenna, we also have sample kits, below is the link. Thanks leggari.lpages.co/sample-kit-ad/

[@dionneGlas]

I wonder if this is where the concept for mirror glazed cakes came from? Beautiful work btw absolutely stunning.

[@LeggariProducts]

Thanks for watching the video

[@what-it-doboyce4953]

Awesome this really looks good

[@LeggariProducts]

Thanks for watching the video.

[@momoftwo9995]

Question : Pouring the primer or epoxy from the can and them smoothning it put, seems like a lot of wasted material and lots of dripping around. Do we really need that much? Can we just not apply multiple coats of it with a brush or roller like a regular paint instead of pouring everything out at once

[@hectornathaniel]

No epoxy is nothing like paint, it has to be a thicker to level out and cover the whole area without spreading apart and leaving missing spots

[@sandrawidboom9135]

Sink area turned out awesome, but I think you need to go back to the drawing board on the backsplash area. No definition like on the sink area.

[@LeggariProducts]

Take a look at our backsplash tutorial video below. Thanks Back splash video kzbin.info/www/bejne/oYakq5yLe8iafJY

[@dreful05gmail]

Can you do this to a counter with basin (solid)

[@LeggariProducts]

Yes you can, take a look at our brochure to see all the different applications. Thanks online.flippingbook.com/view/364043

[@dannydoyle8731]

I really appreciate "real world" application, especially since this mimics my actual vanity top situation almost exactly: with a long big mirror sitting flush on top the backsplash.

[@LeggariProducts]

Hi, take a look at our online brochure. Thanks online.flippingbook.com/view/364043

[@tooshay7396]

No clear coat on top? Dry time? One day, one week?

[@LeggariProducts]

We have 3 different top coat options. Glaze coat is our super high gloss top coat that lays out glass smooth just like the metallic epoxy coat. Our WB Urethane comes in high gloss and leaves a minor texture and we also have a WB Urethane that’s a Matte/Satin finish. The epoxy will be solid within a day but takes a full seven days to cure. Thanks

[@dannac_8888]

tooshay I have seen their clear gloss coat finished and is looks like orange peel. You may want to look into www.amazon.com/dp/B01LYK2NAG/ref=cm_sw_r_cp_awdb_t1_IP3KDb5QRKFA6

[@vishjin1]

What's the counter top surface material.. Wooden?

[@LeggariProducts]

This went over a laminate countertop.

[@diamondpearl1204]

Could you do that to Bathtub

[@LeggariProducts]

This is not a good application for a vertical surface because the epoxy will just run. Thanks

[@arjanvegalrabari1128]

Where sale this item and how's price....???

[@LeggariProducts]

We sell this product on our website at www.leggari.com. ou can actually order or price out a custom kit for that exact square footage through the Counters section of our website at www.leggari.com. Simply click on Counters >>>> Order Counter Kit Here, then follow the steps. Thanks

[@anthonyescobar4083]

Looks great

[@LeggariProducts]

Thanks Anthony for watching the video

[@nayl.900]

How long do epoxy countertops last in general?

[@LeggariProducts]

Our products are actually industrial coating made for military aircraft hangers, etc. So theoretically in a residential, or even commercial setting it will last forever. This is NOT a cheap epoxy paint that you will commonly find at box stores like Home Depot or sherwin Williams. It is a thick 100% solids epoxy coating. Thanks

[@ArturoGarcia-er1hk]

Leggari Products you did not answer the question. Though smh 👎🏿

[@cordlessjump]

Where can I buy your product in Canada?

[@LeggariProducts]

We do not have any distributors, we only sell the product on our website at leggari.com. You can email [e-mail] and they can assist you with an order.

[@8989griff]

Can’t do backsplash lol trust me it’ll run the colours

[@boobie4everful]

Is there a web site where I can purchase a kit.?

[@LeggariProducts]

www.leggari.com is where you can purchase a kit