Lego 1989 Batmobile CUSTOM build from 76224 set [FREE INSTRUCTIONS]

[@gsom7]

Biggest problem in all 3 Batmobiles is siting space just for one. They should use Speed Champion piece for driver and co-driver space.

[@onionrovirosa]

Here is a cool idea the Batman Returns barmobile that becomes thinner……that would be a challenge and lso have the copit open like in the movie. That would be awesome if you can do it

[@The12thDimension.]

Looks very nice, however I'm not too sure about the rear afterburner as I think it looks a bit oversized. Aside from that though it's pretty much perfect.

[@Ninja_v2]

cool design and everything, nice that you put the knob underneith but in all honestly now you have to flip it over sideways or upside down now to pop the guns up, like one guy before me commented, the turbine up front should turn instead, if the knob is underneith it still doesn't really fix the issue, really it creates a bigger issue of what I said, as long as it is upside right with some sort of mechanism then it would fix that issue

[@johndriedger3594]

Just ordered the parts to convert my 72664 kit. The internal build is quite different from the shadow box so will be interesting to see how it turns out.

[@danielau7365]

“Where does he get those wonderful toys?” -Joker

[@randalparkhill7507]

So i built it like yours and i gotta say, as a Keaton batman fan i think you did an awesome job with this. Now if only there was mods for the batwing that just came as well.

[@milesteg5133]

It's a great looking mod of the Lego version but it's really unstable especially the front and back sections being connected by only two bricks.

[@luisjairorozcos.469]

Nice batmobile 👍🎉

[@allangrant1326]

I like your redesign a lot more !

[@legojoseph]

Thanks 👌🏻

[@igorz.3972]

Looks great !

[@jamimurrahman9159]

It looks great man! Great asthetics, I was just hoping you gould figure out a way to make a mechanism to make the guns pop without that visually displeasing knob on the side cuz in your design it seems the guns have to be manually popped out???

[@legojoseph]

In my 1989 V2 you have to manually put the guns on the batmobile

[@jamimurrahman9159]

@@legojoseph oh ok, still looks cool, I'm gonna have to try and figure out a way to make the guns pop out super fast without that knob

[@jamimurrahman9159]

Oh but for v1 you do have a pop out mechanism, just on the bottom of the vehicle, nice 😅

[@Lowlight23]

I love this and am going to try this for my 76224 I just got. Going to download after work to get the missing pieces needed. Thank you! 🫡

[@maynardsdick]

I think it would be neat if twisting the little turbine in the front made the guns pop out

[@yonghunlee5890]

You did amazing job !!❤❤

[@bojandimitrieskimilenkovic9226]

Nice, I'll try something from your video. Thanks

[@legojoseph]

You’re welcome :D you can send your creation in my DMs on Instagram

[@BojanMilenkovic-df7sv]

@@legojoseph thanks for the response, will do!

[@witoldkozowski3256]

you know.... you could change the mechanism for guns the way to link them with that rocket engine intake in front (it is a car rim that can be moulted on technic cros rods).... this way mechanism will be still stealth and you dont need to flip up the car to use the mechanism....you just turns the rim part that represent that rocket engine intake and the guns will fold out.... as for the guns covers, why wont you mount them on hinges so they will open up on their own when guns will fold out?

[@cty1206]

I like your version better. Thanks! You've solved all my peoblems , great job!

[@legojoseph]

Thanks! If you're going to build it send some pics on my Instagram's DMs :D

[@sabix2005]

​@legojoseph I was wondering if you could make it easier for all of us who only have the 76224 and add the special front to make the guns pop up

[@ronhaller2143]

Much better! I haven‘t looked if it is possible, but I thought ideally you could turn the turbine intake at the front to make guns come out.

[@legojoseph]

This is a great idea

[@rvallenduuk]

I like what you did, but both versions are wrong ;-) If the back is 10 wide, the front should be 9 wide but that would be really tricky. By the way, those side-exhausts you talk about are the air intakes for the afterburner on the jet engine ;-)

[@d4ddy0]

If you talk instead of making me read I would subscribe and promote this. I like you build.

[@legojoseph]

That’s the next step

[@themr.creator]

Nice, nice what about the guns from the car?

[@legojoseph]

Same mechanism

[@cybertronconvoy]

I great design. I would like to know do you think there is a way to hinge the cockpit like one of the old lego batmobile did with you new design?

[@legojoseph]

Well.. yes! I guess it’s possibile but the back would need some adjustments

[@truexfan001]

I just want to get rid of the knob tbh

[@Kuza__84]

this is much better they should hire you

[@legojoseph]

Thanks :)

[@fractalelf7760]

Very well done, how do the part counts compare between yours and the official?

[@paweborkowski6959]

I slightly prefer the LEGO version because although it is slimmer than the original, it hides the lack of curvature at the front whereas your built seems too blocky at the front. You just need to use curved pieces and it will be better :)

[@legojoseph]

I'll make a video about it

[@uppercutgrandma4425]

You have to do videos on Lego 2k. I think you'd be a big hit.

[@legojoseph]

I was thinking about it but I don’t know how much you can create as custom vehicles

[@Jpwinks]

Have you improved the batwing yet? 😅

[@michaeldarbe8935]

is there a parts list for the upgraded version, id really like to build this

[@AlicksL.S.]

Wil having 76252 and 76224 cover all the parts?

[@legojoseph]

Add both of them on your Rebrickable account and check the missing parts

[@aym8323]

If I purchase the Batmobile set coming out soon, will I be able to make the version you have made with those pieces?

[@legojoseph]

You can add the set on your Rebrickable profile and check the missing pieces! 🤝🏻

[@eliasgreyson4206]

Can you do a 2 seat version ?

[@legojoseph]

I don’t think to be honest 🤔 It would mean to change all the structure of the model and I have other projects now going on ⚡️

[@eliasgreyson4206]

@@legojoseph thanks for the response

[@spxder24]

batwing next?

[@legojoseph]

🤔

[@adamslyth9535]

@legojoseph did you ever post an additional parts list anywhere for the additional parts for converting to your design?

[@legojoseph]

still not

[@stephanecrepeau3645]

The mechanism wont work. There are too many studs holding the plates and not enough grip to make the gear at the bottom turn. See my solution: kzbin.info/www/bejne/qYKxp2Cfid1mrqM

[@legojoseph]

Nice solution! I would just try to change that mudguard piece with something that doesn’t need to be modded like that :O

[@quincysoares4314]

Is it possible to build this with the new car base peice?

[@legojoseph]

I don’t know to be honest, changing an important piece of this build means change a lot of pieces

[@quincysoares4314]

@@legojosephcould be an interesting challenge 🤔

[@kidneybear2005]

Is it possible youy could redo it again to have two seats and the sliding window mechanism?

[@DrkVengeance8148]

Cool batmobile but I don’t think it’s gonna fit on the batcave

[@legojoseph]

Yes because the front it’s wide as the back

[@DrkVengeance8148]

@@legojoseph I think your other one would be fine

[@mackmy]

if I only have the 76224 version, can I follow this instruction?

[@legojoseph]

No man, you then need extra pieces