#lego #moc #legotechnic #rc All-wheel drive with push-rod suspension and 2 L motors. 447 parts 440x250x60mm BrickLink Studio 2.0 project: io: drive.google.c... ldr: drive.google.c...
Пікірлер: 57
@user-un2vj3xc8t2 ай бұрын
I love this, it has thin body and full suspension incredible.
@bramweinreder2346Ай бұрын
This is definitely the way to go. It would also be very cool to see different configurations of this: - horizontal push rods (side to side instead of front to back), with an engine bay between the front wheels. - torsion bar rear suspension. - passenger cabin between the front- and rear wheels, payload above the rear wheels. (In other words, more like a passenger car but with the same efficient engineering)
@LordDecapo3 ай бұрын
very epic! one of the cooler 4x4 chassis I have seen
@LucasDynamics2 ай бұрын
Nice design! It's so compact!
@ShaharShoshan3 ай бұрын
Awesome work! thanks for sharing the project
@willbingo2 ай бұрын
Careful Traxxas might sue you
@clipdump2 ай бұрын
this is beautiful
@technicunited2 ай бұрын
Great!! It's like a F1 frame!
@nak_attak2 ай бұрын
this is really sleek and nice! and free instructions?!?!?! i think I'll have to use this and attempt to make a bac mono
@erikjones91122 ай бұрын
Great job, also very impressive you managed to fit steering. I would love to see this thing with a sleek body on it.
@olegchetcin2 ай бұрын
I agree, unfortunately I don't have many body parts yet
@joewood3062 ай бұрын
This thing would deserve a scale body (Tamiya, HPI, Kyosho,...)
@Legotyres3 ай бұрын
This looks awesome, well done
@alexlizogub127 күн бұрын
its sick, just gotta lower it 1 stud
@williamschultz2983 ай бұрын
Impressive, well done.
@Spedley_21422 ай бұрын
Very cool but I think you need to look up Ackermann steering geometry.
@olegchetcin2 ай бұрын
thanks, will try!
@PiefacePete462 ай бұрын
I believe a formula one car uses reverse Ackermann... the outside wheel turns sharper than the inside wheel. It's to do with slip angles and tyre temps. Not that I am saying this is a F1 car... just a really nice job!
@sebi81242 ай бұрын
very nice
@saveusfromidiocracy352 ай бұрын
Very well done. As others pointed out, the differential would make steering better. Which tool did you use to animate and design this?
@olegchetcin2 ай бұрын
I am using BrickLink Studio 2.0
@bilsy413Ай бұрын
A really nice design, I've played with pushrod stuff lots. One thing I've found is you have to be very careful with eccentric loading with lego mechanisms. eg. here the shocks are a block higher than the pivot location for the rocker arm. This will add bending through the arm, through the arm pivot, through the shock pivot etc. this adds a LOT of friction which greatly reduces the function of the suspension. Hopefully that's not an issue for you?!
@olegchetcinАй бұрын
that is true, but in this case it seems to be working ok with hard springs
@mooncake58742 ай бұрын
great job
@jurekgadzinowski28952 ай бұрын
It would be even better if it had an open differential in the front and a closed one in the rear.
@olegchetcin2 ай бұрын
I agree, will try to fix that
@jdbrickcreation2 ай бұрын
Nice ! I really appreciate the way you use the suspensions 👍
@jeremyschafer29782 ай бұрын
I think using a buggy motor with a 3 speed trany would probably make it a little faster
@olegchetcin2 ай бұрын
will try!
@jwdjpajtgjm3 ай бұрын
and more power speed i want one!
@Edward-wk9su5 күн бұрын
Is it possible you make rebrickable instructions please 🙏. No computer needed
@olegchetcin3 күн бұрын
do you mean that you don't have an option to open the 3d model on computer that is linked in the description? It is possible for me to create a step-by step instructions but it would just take a huge amount of time, they don't generate automatically from the model (well, they do but the result is almost always is garbage)
@Edward-wk9su3 күн бұрын
@@olegchetcin yes but can’t you make like a picture steps
@olegchetcin2 күн бұрын
@@Edward-wk9su I cannot promise about this particular model, but I hope to come up with a better version of it and I will try to make a pdf instruction for it
@Edward-wk9su2 күн бұрын
@@olegchetcin Okay
@teamlesdiy31762 ай бұрын
Our company also has a 3L engine. I wonder if you are interested in testing it.
@olegchetcin2 ай бұрын
sure, could you link me some details? thanks!
@teamlesdiy31762 ай бұрын
@@olegchetcin I don't know if you have other social media channels or other ways to contact me. I can't put product links in the comments section of KZbin. You can find my contact information through our website.
@teamlesdiy31762 ай бұрын
@@olegchetcin sorry,even link is also not allowed.
@olegchetcin2 ай бұрын
@@teamlesdiy3176 ok, found it, thanks!
@roberhaar61462 ай бұрын
no differentials?
@olegchetcin2 ай бұрын
not in this version, will try to add them in the future
@rob31082 ай бұрын
How did you make it remote control with a camera?
@olegchetcin2 ай бұрын
I just attached my gopro in the front =) I have a 3x3 brick with glued gopro mount
@rob31082 ай бұрын
@@olegchetcin does it connect to a phone?
@rob31082 ай бұрын
@@olegchetcin where you can POV drive?
@olegchetcin2 ай бұрын
@@rob3108 no, this is just to record a video, however a gopro app shows camera feed but a remote controller is a separate app/device