LEGO Technoblade Candy Machine TUTORIAL

So I decided to make a tutorial/instructions for my LEGO Technoblade Candy Machine.
LEGO Technoblade Candy Machine showcase video:
• LEGO Technoblade Candy...
Things to note:
1. The parts list is not definitive. Some parts can be subbed out for others, such as replacing a 1x4 with two 1x2s.
2. The parts of each step highlighted in red are the new parts to be added for that step.
3. Colors do NOT matter, they will not change how the machine works. I suppose the only place on the machine where color could matter is the outside because well, you want it to look like Technoblade don't you? If you need pink parts, bricklink.com is your friend.
4. The candy I used is Double Bubble mini gumballs that you can find at your local Walmart or occasionally Target. They perfectly fit in the 2x2 hopper.
Apparently I forgot something very important in this video. Two 1x8 tiles and a 2x4 tile must be placed at step 9 as shown in this picture. prnt.sc/qR0Re1... The picture shows them as two yellow 1x8 tiles and a light gray 2x4 tile. The 2x4 tile can be replaced with two 1x4 tiles if necessary. These tiles exist as a track for the gumball to roll out on. The reason the tiles aren’t in the instructions is that the program I used to create the instructions did not allow bricks/tiles to be placed at angles. Also don’t forgot add a small rubber band between the tow ball piece and the blue connector pin right behind Techno's nose is necessary. If needed, see original showcase video on where to place it.
Music used in this video:
"THE BLADE" by Kid Kozmic / Isaac Thee Unknown
View here: • "THE BLADE" [Technobla...
#Technoblade #Technobladeneverdies #Technoneverdies #RIPTechnoblade #riptechno

[@etanner11]

it looks so cool it helped so much thank you

[@LegoTechnicsRule]

Apparently I forgot something very important in this video. Two 1x8 tiles and a 2x4 tile must be placed at step 9 as shown in this picture. prnt.sc/qR0Re1yMGeWQ The picture shows them as two yellow 1x8 tiles and a light gray 2x4 tile. The 2x4 tile can be replaced with two 1x4 tiles if necessary. These tiles exist as a track for the gumball to roll out on. The reason the tiles aren’t in the instructions is that the program I used to create the instructions did not allow bricks/tiles to be placed at angles. Also don’t forgot add a small rubber band between the tow ball piece and the blue connector pin right behind Techno's nose is necessary. If needed, see original showcase video on where to place it.

[@gfxgaming9547]

Where does the gumball come out ? I don’t see anyway for it to get to the exit point

[@LegoTechnicsRule]

Seems like I forgot something. Stud.io doesn’t let you place bricks/tiles on angles like I did. I forgot to mention that at the beginning of the video, so I will make a pinned comment correcting it. Here is a picture of where two 1x8 tiles should be placed and one 2x4 tile should be placed. The 2x4 tile can be swapped for two 1x4 tiles if need be. Shown here is the two 1x8 tiles in yellow and the 2x4 tile in light gray. prnt.sc/qR0Re1yMGeWQ The best time to add them is Step 9. Thanks for pointing that out.

[@gfxgaming9547]

K thanks