LEGO Tumbler Amazing Batman MOC!

Get The Instructions: www.brickvault...
Subscribe for more Lego set unboxing! ► / @brickvault
Instagram / brick.vault
Twitter / legobrickvault
Facebook / brickvault
We love fan mail here at the studio! You can send packages and mail here:
Brick Vault
6755 Mira Mesa Blvd. Suite 123, #414
San Diego, CA 92121
USA
Check out our Twitch page for live stream recordings!
/ all
Live Streaming Schedule: Monday - Friday 11:00AM (PST, Pacific Standard Time, California)
More Lego Videos!
Lego Custom Builds MOC: • Lego Brick Vault Instr...
Lego Star Wars Sets: • Lego Star Wars
Lego Batman Sets: • Lego Batman Sets
Lego City Sets: • Lego City Sets
Lego Ideas Sets: • Lego Ideas Sets
Lego DC Universe Sets: • Lego DC Universe Sets
Lego Marvel Universe Sets: • Lego Marvel Universe Sets
Lego How To: • Lego How To
Lego Holiday Sets: / playlist
list=PLHttrZC-uXId4mSi7xwisu0Ab9ZLgwB5z
Lego Minecraft Sets: • Lego Minecraft Sets
Lego Dimensions: • Lego Dimensions
Lego Technic Sets: • Lego Technic Sets
Lego Ninjago Sets: • Lego Ninjago Sets
Lego Minifigs: • Lego Minifigs
Lego Bionicle Sets: • Lego Bionicle Sets
Lego Scooby-Doo Sets: • Lego Scooby-Doo Sets
Lego Creator Sets: • Lego Creator Sets
Lego Jurassic World Sets: • Lego Jurassic Park - J...
Lego Cars: • Lego Cars
Lego Ultra Agents: • Lego Ultra Agents Sets
#Lego #unbox #toyreview #MOC

[@themikeydonuts]

There's a lot I really like with this model. The proportions for sure. The windows in the main cab. The entire 'flaps' section on the rear half. How solid it appears to be. However, I don't care for the treatment of the front wheels and front wheel assemblies. I'm not sure if it's the choice of tires pieces or the spacing between the tires and the flaps. Something is just a bit off there. Going to have to take the plunge and build this MOC to see what I can do with it. Great work. Can't wait to see more, Lucas.

[@chilichongoes9577]

It's that the angle for the front of the car is too steep and reaches the bottom of the car before it should making the wheels look too tall

[@miloscott6617]

I actually think it’s the TINIEST bit too small. And no, I’m not one of those people who’s surprised by how small minifigure scale vehicles are. I actually thing it should be a stud wider, a few studs longer and a stud higher. Edit: And I forgot to mention, the tires aren’t the right size. The tires this model uses for the back should actually be used for the front, but as those smooth versions that the bat vs bane set used for the back tires, if that makes any sense. And the back tires should be those large tires that the new Scarecrow Showdown set used for the front. I AM NOT COMPLAINING. I LOVE THIS MODEL. IT’S JUST A BIT TOO SMALL. And like I said, I’m not one of those inexperienced people who think the Brickvault Mocs are too small to be minifigure scale. I actually think all of the Mocs you guys have done are perfectly scaled. Except this one. Needs to be a bit bigger.

[@CharloTangi]

Lucas really goes all out with his mocs most people would just take Bane's tumbler from 2013 and use black pieces but not him and I commend him for that

[@chivu5234]

I'm running out of passion with DCEU but this does put a smile on my face

[@itande0551]

Chi Vu what about Aquaman and Shazam

[@1punchbrownyt338]

Snyder cut pog

[@msmcuser1718]

HEY watch Snyder Cut and your passion for DCEU will be revived.

[@jordymolnar8351]

Another moc for my never ending to do list :P

[@batmantdk7392]

Thank you so much for this tumbler I just built it today and it is amazing and I love how it’s mini figure scale!!!😃

[@dr.strangebat9397]

Best version ever!

[@Asian_soc]

Not really but it is still cool

[@ohmygoditsgod450]

True the best version

[@miloscott6617]

Nah. Edit: don’t get me wrong it’s awesome but I’ve seen better

[@SinisterSearchHistory]

Lucas deserves to own the Lego company, his mocs beat the official set which means Lego needs to take notes

[@hazeladdison1522]

Don’t Look At Me I know

[@ohmygoditsgod450]

True

[@DarkLordTran]

I didn’t expect it to be so small

[@RonnieFarrellofficial]

Brilliant moc

[@invalidusername6158]

I combined the wheel design of the Tumbler and the sleekness of the 2015 Batman V Superman car and it looks nice

[@fynii9478]

*Lego puts out a small Tumbler* muh it's cheit its too smol *Small minifigure scaled moc* Dude it's amazing Consistency...

[@HaloMashups]

I really hope he makes the Bat from Dark Knight Rises!!

[@supatchube]

Sick moc

[@masterdarklord9857]

I need that right now, if only I had enough bricks

[@user-es7lh5sy9w]

It is AMASING miniature model!👍

[@MStreppelhoff]

What a beautiful sweet tumbler ! :)

[@comic-book-enthusiast]

AWESOME

[@kaiyo7285]

Hey Lucas, I know these take a while to make, but are there any plans on more batmobiles from any version these are great and it would be nice to have a collection of batmobiles all around the same size :)

[@kaiyo7285]

Lucas wow thats great; I thought the batman forever one was from a set.I think a batmobile from the dceu would be interesting unless the one from the set is accurate in size :)

[@AncientAccomplishments]

Oh sweet dude! A mini version! That's sick! 👍

[@R_eagan]

Awesome MOC.

[@thejeff9473]

Who the heck is awake at 5??? Wait...

[@emilioalvear8440]

the jeff I am, every day

[@Cybermat47]

Let me tell you about a thing called “time zones”.

[@Nickelode0n23]

@@Cybermat47 I think it was a joke, lemme tell you a little thing called “Jokes”

[@Cybermat47]

@@Nickelode0n23 interesting, please tell me more.

[@Nickelode0n23]

@@Cybermat47 I don’t get paid enough for this my fingers hurt

[@yodayoda1782]

I love this scale

[@crossbonesjr3605]

I'm just gonna try and take the Tumbler from the dark knight rises set that came out a few years ago and see what I can do with it

[@yamamitsu995]

AWESOME MOC!!!!! I LOVE IT!!!!

[@aadrian]

There's no way that is minifig scale 😂😂

[@Tom-vu1wr]

It is check the statestacs

[@Nickelode0n23]

@@Tom-vu1wr its a joke, yes ik im responding to a 3 years old comment

[@Tom-vu1wr]

@@Nickelode0n23 it deffo wasn't a joke

[@edgemaxxer1573]

@@Tom-vu1wr well minifigs are more wide and shorter and Christian Bale in the movie is a lot tallerand less wide

[@Earthdestroyers99]

I'd cover the studs on the sides and roof with smooth tiles

[@marscg579]

It wouldn’t look too good to do that, I agree it could look smoother, but I think that the way it is it’s the smoothest it can possibly be

[@ixph]

Would love to get instructions for that A-wing!

[@willgolmon9570]

Plz do every agents minifig

[@benphilp9872]

This is fantastic. You should check out the brick dens MOC of the Tumbler

[@rec0il_179]

NEEEEEEEED

[@brentonwarr3987]

Maybe they have been requested before, but I would like to see Jerac’s a wing and inthert’s x wings in yer store

[@m.a.s.productions4278]

R u guys working on the ucs phantom and if so is it the first one or the second??

[@theupsidedownbrick9618]

i think i’m gonna get this

[@jamespenny3759]

Could you do the iron giant moc

[@michaelwittenberg6754]

Hi. 1st if all the MOC looks very cool! But.....I bought the instructions and all the parts on BrickLink. It was not easy to build this model, mainly because the structure and design is very fragile. Some pieces are only connected on one stud which makes the model very vulnurable. It's nice to showcase the model but I would not recommend to let kid play with it. I also whish the model was a little bigger as in my opinion this model is just one step to small for minifig scale. I don't see how I can put a batman minifig into this Tumbler without breaking the model. Conclusion. Nice build to showcase but very fragile design. Hope my feedback shows both sides.

[@paulinchi]

how many parts are in total?

[@daysisalas5435]

Do you get the batman figure with the it when you buy the lego tumbler?

[@Tom-vu1wr]

After thinking about it a bit I have dec8ded to buy this mock. Does your website make it easy to convert to pounds?

[@eddysakti7472]

Can the batman mighty micros version fit with the roof fully on the tumbler?

[@jdsing4203]

Do a moc of the phantom so it can connect to the ghose

[@BrickVault]

working on it :)

[@hcernu4871]

Cool beans

[@jarrodgillingham4365]

Any Aussies know how much it would be for the pieces? I really want to get this but I don’t want to buy the instructions and go to order the pieces only to find out It’ll cost me an arm and a leg. Never used brick link so it’s all pretty new to me :)

[@imbatman9845]

make a play scale rebels ghost

[@guillermodavila9067]

Can you do the bat from the dark knight rises

[@nathanarmstrong969]

Please do a Lego star labs

[@jermo1470]

Cam you Guys do marvel Mocs plz

[@usuck2844]

@lucas where’s the little “bat-bike” that detaches from the vehicle?

[@batbrick3949]

U Suck Coincidentally, earlier today I uploaded a video of how to build the Tumbler with a Batpod that detaches. It’s on my channel, BatBrick39. I think Lucas’s is a little closer to minifigure scale, but mine has more functions. It’s a trade off.

[@apujack9324]

배트맨:으악 너무 좁아 켁;

[@emarino9805]

Do a to scale hulkbuster

[@rec0il_179]

Qa no

[@emarino9805]

rec0il Gaming ok

[@horchata1555]

Where to get the pieces

[@brotatoalan2189]

Why is it so small. That makes it not look like the tumbler chase.

[@Ol_Lochy]

Because the tumbler isn’t a gigantic beast like LEGO makes it look it’s about 5 feet tall

[@batvaleska]

It should be bigger imo. The Tumbler is a tank. A literal tank. IMO, if something is minfig scale, a minifig should fit. Though that’s my opinion. great mov otherwise!

[@Ol_Lochy]

It is Minifigure scale the problem is Minifigure are much wider than a real person

[@mustkokok]

hello

[@wiseman171]

I understand you need funds to run the channel but a price on instructions seems a bit odd to me.

[@Tom-vu1wr]

A high as price

[@unavailable2516]

spiderman brickheadz

[@mrsmutz7876]

Not minifig scale ☹️

[@Ol_Lochy]

It is though

[@screenedtitan2751]

Can a Batman minifigure even fit in this MOC?

[@Robertthachickenwrangler]

Screened Titan 27 yeah this vehicle should be able to fit two grown men in it so I don’t this this is minifig scale

[@Ol_Lochy]

@@Robertthachickenwrangler the problem is Minifigures are much wider than real people

[@Tom-vu1wr]

What about the batpod :(

[@Tom-vu1wr]

Hope he makes that and the bat soon

[@batbrick3949]

Coincidentally, earlier today I uploaded a video of how to build a Tumbler with a Batpod that detaches. It’s on my channel, BatBrick39.

[@joshuafredericksen5370]

Has anyone ever tried to build a UCS MOC for any other Batmobiles?

[@Tom-vu1wr]

There was in 2005

[@jacobyjonson3955]

First

[@TK--ii2hz]

Yeeaaah, that's definitely not minifigure scale. It should be about 1.5% bigger, it's good, just not minifigure scale.

[@batbrick3949]

I don't know, I think he came really close. The actual Tumbler was just under 5 feet tall. So, true "minifig scale" would have to be noticeably shorter than a minifig. Much bigger than this would probably be too tall.

[@BrickVault]

true dat, it's slightly longish by a stud or 2. I used this scale converter if you'd like to punch in the numbers :) www.suave.net/~dave/cgi/scale.cgi

[@GabeMiller35official]

Can I have that

[@frankgoheen9828]

*How many messages will they get from Lego to mass produce this?* None. they will just take the instructions, mass produce it, trade mark it, and sue brick vault for plagiarism. Probably not...

[@leroyjenkins4309]

It seems really out of scale

[@Ol_Lochy]

It’s not LEGO makes the tumbler way too big

[@rexfortoast1777]

no offense im just gonna say that is it ok if we stop for a while theres too much batman sets LIKE WAAAAAAAAYYY TOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO MUCH its just a question no offense

[@rexfortoast1777]

like or comment if you agree with this comment just stop until atleast 1 year thats all im asking for

[@austagtheglorious4534]

Well if the minifigure can’t fit into the minifig scale vehicle, then it isn’t exactly to scale

[@Ol_Lochy]

Bruh minifigures are wider than they are tall so they usually have very small interiors so if the interior is to scale the outside isn’t and if the outside is the interior isn’t it’s just not how legos work

[@anonymouskr7233]

THIS SET DOESNT LOOK MINIFIGURE SCALE

[@peterquant1883]

Guys, your uncritical, overly lengthy videos of stuff you sell are a real bore, undermine your standing and make me not want to watch Brickvault anymore. Please take care not to fall on the slippery slope or corporate greed. Good luck!

[@Ol_Lochy]

Bruh it’s a six minute video

[@thegreenarrow39cw58]

this is wayyy to small to be mini fig scale ... hahaha

[@enternamehere3310]

Thegreenarrow39 CW No it is not, the tumbler is significantly shorter than a human, aprox 5 feet.

[@ringtail5021]

This is totally not minifig scale

[@rec0il_179]

Raccoon Productions it totally is because the mini fig fits

[@lexpher9582]

2 minifigures should be able to fit inside of it

[@lexpher9582]

I like it, but it's not minifigure scale. Should be able to fit 2 minifigures inside

[@Tom-vu1wr]

It's minifigs scale I checked it. It's just that the walls are too thick coz it's made of lego

[@lexpher9582]

@@Tom-vu1wr No matter how many times you "check" it, it will always NOT be minifig scale. Watch the movie(s) again, 2 people (minifigs) were able to sit perfectly inside with "breathing" room around them

[@Tom-vu1wr]

That is not what minifigs scale means

[@Tom-vu1wr]

Minifigs scale means that the outside, not the inside, is scaled perfectly to figs

[@enderdrag6491]

@@lexpher9582 LEGO minifigures are not proportionally accurate to people (they're much wider than they are tall) and so a "minifigure-scale" model from the outside usually has a too small interior, and models with correctly scaled interiors are too big from the outside.

[@cambellcharlie9765]

Hi