Leica BLK2GO Data Capture and Processing Review

[@azimuth9819]

Does this have the resolution to help coordinate electrical conduits?

[@CANDRONE]

Send us an email at [e-mail] and we can help you with this.

[@tahaabdo6527]

Is this compatible with control points? As in coordinate some targets and add them in post processing?

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@HawkGTboy]

Could this be used to survey existing conditions above a ceiling in a commercial/institutional building? Specifically, could I take numerous short-duration scans as I open ceiling tiles and have a single unified point cloud of the above ceiling space?

[@CANDRONE]

Hi, that is definitely possible to do by following some scanning best practices. Feel free to reach out to [e-mail]

[@gjeorgjialilo5337]

Hello, sometimes the resulted point cloud seems to have issues with registration. What is the reason for that and how can it be eliminated?

[@CANDRONE]

This question is a little too specific for us to answer here. Reach out to us at [e-mail] to speak with a team member and we will try and help you.

[@BenDenHelder]

Do you have a blk2fly? And if you do, does this have the detail image option

[@CANDRONE]

We can get them, please contact [e-mail] and our consultants can advise you on it!

[@brynjar100]

could I please get the raw files to import in Register 360 and take a look there?

[@CANDRONE]

Hi! please email [e-mail] to request raw data :)

[@gaberz953]

How far is the monitoring process? How accurate is the work outdoor or indoor?

[@CANDRONE]

Hi, the BLK2GO connects via wifi to the tablet or phone which is generally kept with the operator. The system is rated for 6-15mm accuracy

[@Yiu981]

$49,000. very affordable.did you pay that?

[@ronskiuk]

Whats the battery life like? How long can you capture for?

[@CANDRONE]

30-40 minutes of capture time per battery. The system includes 3 batteries.

[@ronskiuk]

@@CANDRONE not too bad then, does it delivery an aligned single point cloud you could export as .57 straight to Reality Capture? Would be interesting to see your scan mesh from Reality Capture :)

[@CANDRONE]

@@ronskiuk Unfortunately, it does not support that at this time.

[@ronskiuk]

@@CANDRONEOh wait, so you can't mesh the data at all?

[@tarikamine9840]

Merci de m'envoyer ce vidéo en français

[@MrExo_3D]

this should cost $5000, not $50,000

[@MrExo_3D]

$50,000 WTF

[@azimuth9819]

My company uses Trimble units that are even more expensive, not a friendly market