Lenny Magill Introduces the new Glock 5lb. Dot Connector

[@watchnlearn4364]

Another great example of the time and effort Lenny puts into explaining the workings and changes of the Glock line up. Thank you Lenny for your effort and knowledge. A+++

[@RayW808]

I realize this Video is old but know that your "S" reference helped me re-assemble my Glocks a bunch of times and I thank you:-)

[@CycloneGunworks]

Only Lenny could make a 34min video on a dot connector interesting.

[@pi-sx3mb]

I don't want or need any of these aftermarket Glock items, but how can you not like this guy? Lenny could sell snow to eskimos!

[@weedXD38]

Excellent tutorial on the past, present, connectors, job well done!!! Glock perfection!!! :-)

[@contentwarningcity]

@12:25 Left to right to take pins out so the grooves in the trigger pin, that runs through the slide lock, only catch on the slide stop lever’s spring once on the way out, and once on the way in. Do it the other way and you’re doubling the wear on the pin and spring.

[@SwampOperator]

Doesnt matter in the least. But it is easier to not fight the spring twice

[@elimpacto86]

Lenny, I love that trigger weight scale. Please make a Glockstore version.

[@raulclaros1025]

Thank you Mr. Magill for another great instructional video..

[@HopsAndLead]

13:18 Glock reproduction explained by Lenny Magill

[@headknocker8999]

My Gen 4 G26 came with a . Dot Connector & installed a factory - Minus & it did drop the pull by about a 1/2lb

[@flyingplumber226]

The gen.4 has been coming with the “dot” connector for years now.

[@gadsdenjim8785]

Keith Gemmill Yeah I know right. I've had dot connectors for years in My guns. It's not NEW at all. It was originally made to go with the Gen 4 trigger bar and housing because it was too heavy with the standard. They had to make that to make the Gen 4 pull at the spec 5.5lb. But with Gen 3 it's a 5lb connector.

[@flyingplumber226]

Gadsden Jim correct

[@grantbuchanan2953]

Excellent instruction Lenny as usual!!!!! Grant B.

[@mve9924]

Outward left to right makes it easier to wiggle the slide release out of its groove in the trigger pin.

[@bishop2355]

I didn't know about the different oem glock connectors. Thanks

[@GrandmaDaniel]

this video helped a whole lot!!! do you have a video on the firing pin spring and the safety plunger spring? i think i know how to do the safety plunger spring but no clue on the firing pin spring.

[@kentwilliams4152]

When we tested all available .40 S&W duty pistols at Aberdeen Proving Ground in 1995 all three (or four - can’t remember) duribility test Glock 22’s self destructed between 6,000 and 8,000 rounds. Subsequently Glock added the Locking Block Pin for all models. I am surpriased that the locking lock pin is not on the Generation V. Perhaps Glock found another way to strengthen the action without the locking block pin.

[@chrisyanik9984]

Are digital trigger scales outlawed in California

[@TyrantExterminator1776]

Everything is outlawed in Anusfornia

[@Sensei0075]

Thank you Lenny for all of your excellent videos! They extremely educational and entertaining. You are truly a Glock Master!!

[@imtherealjoeyd]

The dot connector was designed due to the new/different angle of the trigger housing. In order to make a smaller grip (by 2mm) with interchangeable backstraps on gen 5/4, they had to make the trigger housing smaller and change the angel of the connector. Compare a gen 3 and gen 4 trigger housing and you’ll see what I’m talking about.

[@imtherealjoeyd]

The gen 5 triggers are slightly lighter though. That is true. This is due to the new design of how the trigger mechanism works. A standard connector in gen 3 should have same pull as dot connector in gen 4. And sweet trigger is a dot connector in a gen 3.

[@bourbondrinker4828]

My glock19 gen4 has a dot mark on the connector from the factory i dont believe this is a new thing. Great video and presentation by the way!

[@gadsdenjim8785]

Bourbon Drinker Yeah it's NOT new it did come out in the Gen 4s.

[@maxmccain8950]

I’ve used the dot connector for years. It’s like Goldilocks, not to firm, not to light.

[@lencost1]

Another great video Leonard!!!

[@Youtuber-uz5hc]

I thought we were going to talk about Nashville?

[@ES44AC-2]

My G19 gen 5 MOS FS came with the " Dot " connector from Glock. Not sure if all Gen 5's have this or not?

[@Jeff-xn1ew]

Very good content! Thanks Lenny

[@jamesregan2181]

Very informative. Thank you

[@adambaker29]

Will this work on Gen 3 models?

[@katana258]

so does your 3 1/2 lb make racking the slide close to impossible , does it lock up the pins where you need to use a hammer and beat them out .. well does it

[@TyrantExterminator1776]

I have had no problems and I have the Black Yikes in a gen 4 and a gen 3

[@SwampOperator]

That damn connector doesnt have a single thing to do with the slides ability to reciprocates and neither does it affect the pins You get it? Well do you? If i was you id stay away from it. Seems like you dont have a clue about any of this

[@Cliffhanger_MFC]

I’m happy with the apex upgrades

[@FrenchMastiff]

Great demonstration !

[@metasoft0221]

Thank you Lenny

[@Rob_Nasty]

Lone wolf stock trigger. I've had amazing luck on 2

[@ninjasimmons-elsr5354]

Why would someone need an 8lbs. Connector? Love ya vids lenny!

[@ihp7]

When I read the "Glock" book by Paul Barrett, he mentioned some thought the Glock trigger was light compared to their revolver triggers. So I'm thinking it's for them, but really just a guess

[@Tr-ce8rj]

Maybe for state requirements, like NY ? I believe Mass. won't allow Glock sales at all due to their requirements on trigger pull weights.

[@SwampOperator]

New york had a pull weight requirement and i think its damn 10.lbs Not sure exactly butni bought an "ny compliant" m&p one time that had a real heavy trigger. And when i replaced it all there were some trigger parts that were advertised as ny compliant

[@sigurdfenrisson2446]

I’m glad Lenny understands the importance of sound effects when explaining things! That S curve sound just made my day! 👌🏻

[@bradleyburdett5361]

He likes to make old school karate film noises as well

[@dcb6729]

My glock 23 gen4 came with a dot connector.

[@blainethepilot]

Nashville huh...well that's my backyard....i'm intrigued

[@Tr-ce8rj]

Maybe an Eastern branch of the Glock Store?

[@blainethepilot]

We'll I hope so haha....hey glockstore....need any employees? Lol

[@rofocowboy84-l9s]

How is it new? It's been out for years...

[@bowhunter4489]

I looked and seen no gen 4 glocks in the playlist ?

[@alphakennybody2583]

well hes in cali he cant sell any only LEO we cant buy any gen4 or 5's

[@bowhunter4489]

Jorm Ko lol what you can't buy 4,or 5 why not?

[@joed3264]

Actually my Gen 4 41 came with the dot connector.

[@paulmatakovich9096]

Do they work on the G22

[@SwampOperator]

Should be the same. Mayb be different for the 45 and 10mm because the frame is larger. Not sure.

[@bowhunter4489]

Cool

[@MrChris-bx7ss]

This guy reminds me of an ex porn star. Was that his agent calling? LMFAO!

[@chrisyanik9984]

Too funny

[@user-pv9pv4xf9c]

Dude the way he did say, "I'll call them back later," does fit with your narrative. lol

[@InGratitudeIam]

Dot connectors are commonly found in Gen4 guns. This is not a Gen5 thing.

[@StephenFay]

Exactly 5 lbs. on the dot. I get it.

[@Reloadingfromthehotpot]

If you order anything from his store good luck getting it, great vids, bad customer service

[@craig4fsu]

Never had a problem with them. What happened with your shopping experience?

[@Reloadingfromthehotpot]

I ordered an item that said in stock, waited for delivery, never came. Called and was told the item was not in stock and did not have an arrival date so I cancelled my order and got the item elsewhere.

[@craig4fsu]

I found this report that's supposed to be a former employee. It addresses the "in stock items" issue. www.ripoffreport.com/reports/glockstorelmp/san-diego-california-92123/glockstorelmp-lenny-magill-a-different-perspective-from-a-former-employee-san-diego-c-1090797

[@vincentj3093]

craig4fsu WoW

[@vincentj3093]

Kimber 10MM put the stock trigger back in and don’t look back

[@vincentj3093]

I see no need to change anything- pretty sure that’s way its called Glock Perfection. The only time I’ve seen a Glock fail it was due to aftermarket parts.

[@vincentj3093]

Kimber 10MM ok it already has it , so no need to swap it out.

[@strat1080]

It’s a factory Glock part dude

[@fluffsipad7462]

I like at my iPhone thanks

[@metaphor239]

😑😑😑😑😑😑😑😑😑