Hey boss thanks a lot ye... You really helped me a lot to bring that S145 back to life... I thought you would not help if i whatsapp u but you did saved it...
@borvitech23 күн бұрын
Welcome I always help when ever I can
@sionrafa1546 Жыл бұрын
you forgot the mosfet that you selected in the cover. So that in the future the mosfet does not get somewhere where it can short the board. Otherwise, nice video
@borvitech Жыл бұрын
Thanks for the observation i didn't notice that.
@zungaloca23 күн бұрын
Awesome helpful subscribed
@borvitech22 күн бұрын
Thanks for the sub!
@Kinggaddafi Жыл бұрын
Thanks for sharing this, please what did you use to put the bridge, I'm a beginner in repair. Thanks alot.
@borvitech Жыл бұрын
Thank you use a small thine wire as bridge
@Kinggaddafi Жыл бұрын
Thank you boss, really appreciate
@user-vf1go9rd1j11 ай бұрын
Y otra duda como saber cual de los dos mofer's esta mal que valores dan por defecto en la escala de diodos
@borvitech11 ай бұрын
If you have a bunch power supply it will be easy for you.. the mosfet ment be good but the is something wrong in the board that make the mosfet to go off,, so if you have a power supply put the power from the current resistance and see if there is a problem on the board
@user-vf1go9rd1j11 ай бұрын
Ok entiendo esta parte gracias y la alimentación entonces dónde se conecta para hacer esa prueba para que prenda la pantalla, el detalle es que en el vídeo no se logra ver
@undeadking2596 Жыл бұрын
Wait i have a couple questions: Did u bridge the 3 pins at the bottom of the small mosvet? The second question if i had to leave it to change for 24 hours will the battery explode? And if the fan spins and stops, how do i fix that?
@borvitech Жыл бұрын
I bridge the input 4pins to output 3pins but before them check if there is a short on the motherboard Thanks
@undeadking2596 Жыл бұрын
I put a power supply on the first pin of the big mosfet and the red light came on but when i did the power on like the video the all the lights but the red one was blinking and there was a blank screen, should i remove the first mosfet and do the connection and then try clearing the bias
@borvitech Жыл бұрын
If I get you rightly you said you put the power supply on the big first mosfet,,, its wrong.. when you connect the charger to the laptop where the 20v stop of the board????? First mosfet or second mosfet???
@undeadking2596 Жыл бұрын
I put it on the second mosfet ,exactly how u did it on the video
@borvitech Жыл бұрын
Chat me on WhatsApp +27734408909
@user-vf1go9rd1j11 ай бұрын
Disculpa mi equipo tiene el mismo problema pero en el vídeo no logro ver donde conectas la alimentación para que entienda la luz naranja y la pantalla
@user-vf1go9rd1j11 ай бұрын
...
@borvitech11 ай бұрын
I put a bridge on the mosfet input to output 4pins to 3pins after I found our there is no short on the board.... So make sure you check for short first
@gustavoinformatica7809 Жыл бұрын
Would you have the .bin file of this notebook Lenovo Ideapad S145
@borvitech Жыл бұрын
Send me message telegram
@user-xy7pj9sc5w6 ай бұрын
Can you give me little enlighten on my system board
@borvitech6 ай бұрын
What enlightenment or ideas you wanna know??
@oladejoolaidehabeeb31078 ай бұрын
Hello. Please I have a damaged resistors from repair now I get a dark screen what can I do?
@borvitech8 ай бұрын
What resistor is that???
@oladejoolaidehabeeb31078 ай бұрын
@@borvitech on my Lenovo Ideapad S145 15IWL. They are close to the screen flex 6 in Number. Lost 2 of them while trying to bridge for backlight
@borvitech8 ай бұрын
Don't you have a donor board??
@oladejoolaidehabeeb31078 ай бұрын
@@borvitech no. I dont
@borvitech8 ай бұрын
Those carbon resistor is it not on the 20v power line???
@NejdrianeLawson Жыл бұрын
So the orange light mean it's charging
@borvitech Жыл бұрын
Yes
@NejdrianeLawson Жыл бұрын
@@borvitech i would it's not charging
@borvitech Жыл бұрын
Did you take out the first mosfet??? If you take out the first mosfet and bridge it, it will not charge the battery
@MrYudikha Жыл бұрын
Can you show the pic where i must jumper it.. Thank u brother
@borvitech Жыл бұрын
Have you check there is no short on the board b4 you put the jumper???
@MrYudikha Жыл бұрын
@@borvitech no short.. But i want to test that because my friend's laptop is dead in same model
@borvitech Жыл бұрын
U can jump the second mosfet from charging pin but before that make sure there is no short on the board
@MrYudikha Жыл бұрын
@@borvitech can i text u to send pic of jumper..? To make sure if my jumper is right