Mooer GE 250: Demo & Review (extensive sound demo: Fender, Marshall, MesaBoogie. Detailed desc.)

In this video we will share a demo review of the Mooer GE 250, that is an amp modeller and multi effect pedalboard. This demo song is called "3 emotions"...in fact I will play 3 different styles in order to test different amps and effects...at the end of the demo song we will describe in details the GE 250 main charachteristics, the ways we can use it, the in/out/connections and then we will hear more sounds and I will give you my two cents...I hope you enjoy and plese subscribe to my channel and hit the notification bell...it would be of a great help !!!
▶💽 Link to a playlist of my songs: • Leo Gibson Songs
▶🎸🔉 If you are interested in my IRs, please follow this link: www.leogibsong...
▶🎸🔉 If you are interested in my Kemper Profiles, please follow this link: www.leogibsong...
Link to DistroKid with 7% discount for you: distrokid.com/v...
--------------------------------------------------------------------------------------------------------------
OTHER VIDEOS:
▶ Pedalboards demo review:
Neural DSP Quad Cortex Unleashed: • Quad Cortex Unleashed:...
NUX MG 30 demo review: • NUX MG 30: Demo and Re...
Pedalboards Latency: • The most extensive amp...
Fractal FM3 demo review: • Fractal Audio FM3: Dem...
Kemper Stage demo review: • Kemper Profiler Stage ...
POD GO demo review: • LINE 6 POD GO: Demo & ...
Zoom G11 demo review: • Zoom G11: Demo and Rev...
Zoom G6 demo review: • ZOOM G6: Demo & Review...
Valeton GP 100 demo review: • Valeton GP 100: demo a...
NUX MG 300 demo review: • NUX MG 300: Demo & Rev...
Mooer GE 300 lite demo review: • Mooer GE 300 Lite: Dem...
Mooer GE 250 demo review: • Mooer GE 250: Demo & R...
Mooer GE 150 demo review: • Mooer GE 150: Demo / R...
▶ Modeling pedalboards comparison videos:
Quad Cortex vs Fractal FM3: • Neural DSP Quad Cortex...
Quad Cortex vs Kemper: • Neural DSP Quad Cortex...
NUX MG30 vs Mooer GE 200 vs Ampero One: • NUX MG 30 vs Ampero On...
FM3 vs Kemper vs Helix vs Pod GO vs NUX vs Valeton vs Mooer vs Soldano: • FM3 vs Kemper vs POD G...
NUX MG 300 vs Valeton GP100 vs Mooer GE 150 vs Harley Benton DNA: • NUX MG 300 vs Valeton ...
BOSS GT 1000 core vs HX Stomp: • BOSS GT 1000 core vs L...
Zoom G11 vs Mooer GE 300: • Zoom G11 vs Mooer GE 3...
Fractal FM 3 vs Kemper Stage: • Fractal audio FM 3 vs ...
POD GO vs GE 250: • Line 6 POD GO vs MOOER...
GT 1000 vs Line 6 Helix: • BOSS GT 1000 vs LINE 6...
Line 6 Helix vs Headrush: • Line 6 HELIX vs Headru...
GT 1000 vs GT 1000 core: • BOSS GT 1000 vs GT 100...
GT 1000 vs FM 3: • Fractal FM3 vs BOSS GT...
GT 1000 vs HEADRUSH: • BOSS GT 1000 vs HEADRU...
GT 1000 vs GE 300 vs HELIX vs HEADRUSH vs PLEXI: • GT 1000 VS GE 300 VS H...
GE 200 vs GE 250 vs GE 300 vs GE 150: • MOOER GE 150 vs GE 200...
GE 250 vs Hotone Ampero: • Mooer GE250 vs Hotone ...
GE 250 vs HX Stomp: • Mooer GE 250 vs Line 6...
GE 250 vs Gigboard: • MOOER GE 250 vs HEADRU...
GE 200 vs Ampero One: • Mooer GE 200 vs Ampero...
HX STOMP vs GIGBOARD: • LINE 6 HX STOMP vs HEA...
GE 250 vs GE 300: • MOOER GE 250 vs GE 300...
GE 150 vs ZOOM G1X Four: x • Mooer GE 150 vs Zoom G...
GE 250 vs Ampero vs HX stomp vs GigBoard vs JCM 800: • GE 250 vs AMPERO vs HX...
BIAS AMP 2 VS AMPLITUBE 4 VS SOFTUBE VS FORTIN vs PLEXI: • BIAS AMP 2 VS AMPLITUB...
GE250 vs HX STOMP vs GIGBOARD vs IRIDIUM vs Fender DLX Reverb: • GE250 vs HX STOMP vs G...
---------------------------------------------------------------------------------------------------------------
#MOOERGE250

[@lesharrison3739]

Thanks for this and all of your reviews, Leo. Your analysis is thorough and your playing is brilliant. You sold me on this. I purchased a Line 6 HX Effects and was not sold on it. I sold the Effects and bought the GE 250. I am so happy I did. It is fantastic all around. impressive machine. Thanks again. All the best and stay well!

[@LeoGibsonGtr]

Thank you, your comment is really important for me and I'm really happy to have been on some help! Stay safe!

[@Active-guitar]

Thank you for the detailed and clear explanation demo, with excellent playing and tones! It was really convincing.

[@LeoGibsonGtr]

You are more than welcome! Thank you for your interest in my channel!

[@victormendescunhalima4970]

This is something I was looking for: a multi-effects that has more playing resources , amp modeling variety and same sound quality than Zoom G5n (my current multi-effects). And by the way great review. Keep at it, Leo!!! :)

[@LeoGibsonGtr]

Thank you, really appreciated!!!

[@georgeirisarri4371]

are u waiting for the G11 or u want the ge250?

[@georgebarry3153]

Great Review,as always,Leo!!!! Detailed,thoughtful, useful info. ThANK yOU!!!! But if I may suggest, please raise the volume of your narration...there is shocking difference of volume between your narration and your demo music..and the ads that YT runs (which are very loud). But still...you ROCK, Leo....Thank You!!!!

[@LeoGibsonGtr]

Hi George, thank you!! I will try to do my best for fixing the volume difference... thank you for letting me know... one of my goal is to upload quality contents, so your suggestions are welcome.

[@georgebarry3153]

@@LeoGibsonGtr Leo, but realize your content is GREAT.

[@marcelo_campitelli]

Really quality stuff you upload Leo. Just wanted to congratulate you for your channel and say that you have a supporter here! Thanks for doing quality reviews and material, we appreciate it!

[@LeoGibsonGtr]

Thank you Marcelo, I'm really happy that you enjoyed the channel!!! Really appreciated!!!

[@chelovj6810]

Leo: Your video and your playing deserve more views. Keep going on. You are an authentic professor.

[@LeoGibsonGtr]

Thank you, it really means a lot to me!

[@anthonydellorusso9554]

Thanks for the awesome review, Leo! I can't figure out if the GE250 sounds that good, or just your playing makes it SOUND that good!

[@LeoGibsonGtr]

Hi Anthony, you are welcome and I'm happy that you like the review! I'm not doing anything special..

[@jackmeginniss6327]

That sounded great! Very nice playing too!

[@LeoGibsonGtr]

Thank you Jack!!!

[@jackmeginniss6327]

Leo Gibson My pleasure Leo. Thanks again!

[@DizzyKrissi]

Thanks for this well-made review - surely was a lot of work to edit this - appreciated and a successful new year 2020.

[@LeoGibsonGtr]

Thank you Dizzy! I wish you the best for the 2020!!!

[@fighterx4133]

I'm drooling over those surhs.

[@LeoGibsonGtr]

Suhr makes really great guitars!!!

[@dennismeredith6944]

Very Helpful Review!!! Thank You!!!

[@LeoGibsonGtr]

Thank you Dennis, really appreciated!

[@rveurope]

Impressive intro song and great review..by numbers and features you presented this must be very good buy?! ( as i work with a Gt001 now with Ev 5 expression pedal..good not perfect..specially i struggle with good semi hollow jazzy sounds) happy new year! Great work in 19..thanks for sharing! :-)

[@LeoGibsonGtr]

Thank you and happy new year too!!! Actually this pedal board is very goof for the price...it’s not a Kemper but sound pretty good!!!

[@unmondelibre]

Amazing review, as always.

[@LeoGibsonGtr]

Thank you Emmanuel!! By the way...this is gonna be my last video for 2019...so... happy new year and thank you for your support through 2019...😀

[@unmondelibre]

@@LeoGibsonGtr A very happy new year to you too! And many thanks for your work.

[@hoosierdaddy2308]

Great video Leo.. How do you kill the noise of the single coils on your Suhr guitar? I hear no 60 hz noise at all with the gain and overdrive tones. Very cool and it sounds awesome. You have great tone and great playing.. ! ! ! ! !

[@LeoGibsonGtr]

Thank you, I'm happy that you like the video! Actually this video is pretty old and I don't remember if I was keeping the noise gain active or not...typically I don't use noise gates...but maybe this time I was using it...unfortunatelly I don't remember the exact setting...I'm sorry....

[@JosePineda-jn8jk]

We are in this weird era of great effects processors at decent prices. I really like my HX stomp but, then I go on videos like this and realize that my unit is not perfect LOL. I like with this can do but I think that routing wise and pedal board integration wise I made the right choice.

[@LeoGibsonGtr]

Thank you for your message and for sharing your opinion with us!!!

[@swaraj7]

Hi Leo, great and informative video. Please make a video of 4 cables method to connect to an amp with the settings and how to use the effects. Hope I am not asking for too much :)

[@LeoGibsonGtr]

Hi, yes, actually I would like to do a video about the different ways you can use an amp modeling pedalboards...and of course the 4 cable method is one way....I need time...

[@kelleywhite5761]

Great review, nice playing.

[@LeoGibsonGtr]

Thank you Kelley, really appreciated!

[@keithbenedict8764]

Your playing is...wow...just unbelievable! I’m interested in the GE250 or something like it to play through my tube amp using the 4-cable method. Mooer recommends turning off amp and cab sims for this use case. The Mooer’s strong suit seems to be amp and cab sims, although effects seem top notch as well. My question is, do you think it’s worth a unit as sophisticated as this if I’m not going to use the amp and cab sims or would I be better off with something simpler? Once again, great playing!

[@LeoGibsonGtr]

Hi, thank you, I'm really happy that you like my playing. If you need only effects you can take into consideration also the Line 6 HX effect or the TC electronic plethora X5 (here you can find my review of the X5: kzbin.info/www/bejne/aJ_Xq4KtYqeogpo), but I think that at the end it is a matter of price. I mean if you spend the same amount of money (or even less) for a GE 250 vs a HX effect or a Plethora, why not to buy the GE 250 that also offer amp modeling? So, unless you are into TC electronic effects or HX effect, I think that the GE 250 is still a good contender. Thank you for your message!

[@madcarrot2022]

I have the exact situation, and trying to decide between GE250 and PodGO. I don't think I can go wrong with either. It's good to have amp modelers in fact they are really good i won't able to tell from a blind test recording between GE250 and a kemper. The cab sims are good for headphone and direct recording...

[@keithbenedict8764]

@@madcarrot2022 So far I've spent a week using the Zoom G5n and the Hotone Ampero. The Zoom was just too clunky. It sounded ok, but I just didn't like the user interface. The Ampero had a good user interface, but it created a really bad 60hz hum when connected to the input or FX loop on my amp. I also figured out that I really only use a boost/drive pedal, compressor, delay and reverb. I found myself gravitating toward the same boost/drive, delay, and reverb everytime. So, I've changed my approach entirely. I'm creating a real pedalboard. I ordered everything this week and all the parts should be here by Friday. I bought a Fulltone OCD, Behringer Tube Screamer, Behringer CS400 (comp/sus), pedal tuner, MIMIDI digital delay, and JOYO Space Verb 4.

[@madcarrot2022]

@@keithbenedict8764 Thanks for the feedback. The GE250 seem to have a really intuitive interface aligned with signal chain, and the drum machine & looper seems very handy for my needs. Let me know how your pedal board build it goes. I mostly just need time based effects. The cab IR seems really tempting for recording and quite practice with headphones.

[@keithbenedict8764]

@@madcarrot2022 I haven't used the GE250, but based on other feedback I've seen, it's a great device.

[@normjones6916]

Hey Great info and music tracks. Maybe at the end feature some of your singing and vocals with the guitar licks :)

[@LeoGibsonGtr]

Thank you Normand! Happy 2020, I wish you the best! Vocal tracks are pretty difficult for me...maybe in the future...😊

[@tomzeto]

Awesome soulful playing Leo! This unit sounds great! Helix killer?!

[@LeoGibsonGtr]

Thank you...when you like my playing...I'm happy!...well, the possibility to load in this little unit the profiles made with the GE Labs is for sure a killer feature!

[@guilhermesperto7862]

Perfect !!!

[@LeoGibsonGtr]

Thank you!

[@mayitomj]

still say it! Excellent videos!

[@LeoGibsonGtr]

Thank you, really appreciated!!!

[@MikeJBlues]

Love your videos man. Always a great review. Are you in Italy??

[@LeoGibsonGtr]

Hi Mike, thank you!!!! Well, I promised that I will reveal my nationality as soon as I will reach 10k sub...😊 Thank you for your message!

[@MikeJBlues]

@@LeoGibsonGtr sounds good. Keep up the good work.

[@LeoGibsonGtr]

Than you for your patience!

[@MikeJBlues]

@@LeoGibsonGtr if you have your GE 250 can you give me the measurement length? Trying to compare it to my GE 200 in size. Thanks .. Inches if you can

[@burakkahraman9494]

Hey Leo, first time with your videos, just find out and it is great. Really like your playing, guitars and informations. I just sell my analog pedalboard and looking for a good multi effects. Im trying to figure out your connections strats in 7:00 and i didnt know these, really appreciated. May i ask you how you connect your guitar when you just using an amp, 4 cable method? Thank you!

[@LeoGibsonGtr]

Hi, thank you so much!!! For the 4 cables method connection, you can check out this video kzbin.info/www/bejne/iWK5pqKqq7alb9E , where at 1:56 I explain the connections. Thank you once more for your message and your interest in my channel!

[@phi2771]

Great demo guys. 2 questions about this unit. Can you send the amp modeling side to the front of the house, and a separate output for an amp onstage at the same time? Also, does Mooer offer tone sharing like line 6 does? Thanks

[@felipedourado]

Dude, your videos are pristine. If only you could normalize the audio, the spoken part is much more lower than the played parts, my ears were almost blowned when you started playing! hahah Regards from Brasil

[@LeoGibsonGtr]

Hi Felipe, I will try to do my best. See you!

[@accentontheoff]

Hi Leo, mostly unrelated question, hope that’s ok. Could you share your workflow when it comes to sample rates. If you record at 48 kHz I presume your project is also in 48 kHz. My question is what do you do when you need upload your DAW project in places where they only accept files in 44.1 kHz. Do you downsample the entire project. Or do you downsample the guitar track well before importing it into the project. Most importantly what tool do you use for these things. Thanks!

[@LeoGibsonGtr]

Hi, no specific reason, that another way for sure, and thank you for pointing it out. I'm really happy that you like the video!

[@accentontheoff]

@@LeoGibsonGtr Thanks!

[@JiTiAr35]

Shouldn't have added anything other than GE250 sound. Nice demo btw.

[@LeoGibsonGtr]

Thank you!

[@Locaciullo]

Hi Leo, you would recommend the ge250 or the ge300 to "emulate" the marshall ?(I don't care about the synth function)

[@LeoGibsonGtr]

Hi Luigi, they both sound pretty good. The GE 300 has more options, like the possibility to use two microphones that give you more tonal options. Therefore I would go with the 300. Thank you for your comment,

[@neilkendall5499]

Good review! A question - is it possible to set the tuner to silent, so when you switch the tuner on it's already in silent mode? Thanks.

[@guitarfuntastic150]

Hi Leo, for this video have you connected the GE250 to a PC by an audio interface?

[@LeoGibsonGtr]

Hi, if I remember it well I connected the GE 250 to the computer via USB Thank you for your message!

[@gustavovillanueva7309]

Great!! Your brother Play good too!! Hahaha

[@LeoGibsonGtr]

Thank you, really appreciated!!!

[@nmcpcj]

Thank you for the great video. I'm wondering if and how can you connect extra controls to toggle specific effects. Is there a specific midi controller? Thank you again!

[@LeoGibsonGtr]

Hi Nuno, you are welcome I'm happy you like it!!! Yes, you can connect the NMP2 (included in the box) that provides you with 2 more foot-swiches and can operate in stomp mode. As regards external midi controller: it does not have midi input, and unfortunately I don't know If you can use MIDI via USB. If someone knows, please drop us a message!

[@nmcpcj]

@@LeoGibsonGtr NMP2 ? Isn't that for the new NUX MG 30? I was referring to the Mooer ge 250. Thank you again 🙏

[@LeoGibsonGtr]

Hi Nuno...sorry...you are right...wit all these comments I'm making confusion...sorry! Nevertheless you can connect whatever external midi controller you want to the midi input of the 250. I was not able to find info about midi messages, so I'm not sure if you can switch on and off specific effects...I would say that you can, but I'm not 100% sure. Thank you and sorry once more for the confusion!

[@nmcpcj]

@@LeoGibsonGtr no worries, i totally understand and appreciate your time 🙏

[@LeoGibsonGtr]

Thank you!

[@MikeJBlues]

Leo where can we get your demo samples for the GE250? They are great.

[@LeoGibsonGtr]

Thank you Mike...Actually I didn't release them and many months are passed since this review...so I'm afraid I don't have them any more...but you are right...I should share the presets...I need to have a more organic approach to the preset topic in general! Thank you!

[@MikeJBlues]

@@LeoGibsonGtr that's cool Leo. I had to re think my choice of tge GP 100 as well. Its no where as good as the MOOER. There is a MOOER site you can upload presets to share.

[@Zilmayjaink]

Excuse me Mr. Leo. How does the ctrl/preset buttons work? I mean, they supposed to be each for a different patch within the same bank. But when you assign ctrl functions like turning on/off effects blocks how does that work? Also, have you found any cut or jumps on the audio when using the Ctrl to turn on/off effects? What about when changing presets?

[@SuilujChannel]

Hi Leo great test. What is your opinion when you compare the Mooer GE250 with the new Line 6 POD GO? I am not sure which to choose.

[@LeoGibsonGtr]

Thank you! Actually the Pod Go is not yet available so I can't judge. It seems a great option and I'm gonna buy one when available!

[@SuilujChannel]

@@LeoGibsonGtr thanks! Then I will wait until your test ;) I really like your detailed comparisons. ;)

[@LeoGibsonGtr]

Thank you! I've notice in the stores that the unit will be released in April...I will try to get one earlier...but I'm not sure to succeed...Thank you once more!

[@SuilujChannel]

@@LeoGibsonGtr great! I think the pod go has some advantage. For example you can add the same effect multiple times (for interesting delays). And it has a higher sample rate (96 kHz). One disadvantage are IRs with only 1024 sample points. I don't know how important this is for sound (and if this means that the amp models in general are less detailed, too). These are my thoughts for comparison. I am looking forward to your tests. :)

[@LeoGibsonGtr]

@@SuilujChannel I'm very impatient to test this unit out...😊 and I do agree with your considerations...

[@peteroerts]

Hey Leo. I absolutely love your channel. It's serious and to the point. You're obviously also a great guitarist. I have a question: Do you have an ir for the Mooer GE 250 you can recommend?

[@LeoGibsonGtr]

Hi Peter, thank you so much!!!, I use the redwirez IRs. I think they are pretty good. Thank you for your message!

[@peteroerts]

@@LeoGibsonGtr Thank you :)

[@torrezani]

Will have a GE 250 vs POD Go ??

[@LeoGibsonGtr]

YES! As soon as I will able to get one...it should be released in 2 months...so....stay tuned! :)

[@torrezani]

@@LeoGibsonGtr Thank you my friend!!

[@kow294]

Hi leo, is there an independent power amp sim in the unit? say I have a preamp pedal, and i want to use it with the power amp and ir that comes with the ge 250. is that possible?

[@LeoGibsonGtr]

Hi, this is a very good question...I'm not completely sure, as in the cab section there is also the possibility to select the valve type, that is tipically a part of a power amp, and in the amp section there is also the master volume that is still relevant to the power amp section...so it's like part of the power amp simulation is in the cab section and part in the amp section. Being the valve type in the cab section and having also other knobs to set the volume, I would say that it is possibile. Thank you for your question and your interest in my channel

[@bluematrix5001]

Has spill over? I mean when you change a patch the tail of the effx still when you change the sound

[@LeoGibsonGtr]

Hi, yes, it has the trail function for reverb and delays. thank you for your message!

[@alfredomusico]

Hola Leo... Ojala me puedas ayudar. Soy un guitarrista que toca de todo, desde Dixieland hasta pop Rock . Tomando en cuenta la calidad de sonidos ,nitidez, prestaciones en vivo (no toco nunca con amplificador, siempre a la mesa de mezcla) ¿Cuál crees que sea mejor para en vivo, Line 6 Pod Go o Mooer Ge 250 ? estoy indeciso en cual seleccionar y se que con tu experiencia me podrás guiar para decidirme por una. Saludos y gracias de antemano .

[@LeoGibsonGtr]

Hi Alfredo, I would say that if you have some amps to profile or you like the profiling concept (for instance the possibility to download profiles from Mooer web site), let's go with the GE 250. If you need more footswitches or if your are a line 6 effects "affectionado", you should go with the POD GO. You can also check out my direct comparison between the POD GO and the Mooer GE 250 that I did in my channel. I'm not inserting the link, because somethimes the messages with link are deleted by YT Thannk you!!

[@andry.spampy]

Hotone Ampero vs Mooer GE 250...which one is better?

[@LeoGibsonGtr]

Good question...Unfortunately I don't have an ampero, so I cannot compare directly the sounds...let me say that in these hours I'm trying the "tone capture" feature of the GE 250...and I'm really happy with the results...stay tuned to my channel, because I'm gonna upload a video about it😊. I don't think that the Ampero has this feature, and I would say that it is a pretty big selling point for the GE 250, if you have amps to capture/profile. Thank you for your question and your interest in my channel!!!

[@andry.spampy]

Thank you for your answer! I suggest to you to do a video comparison between these two amp modeler, because i noticed that many other people have the same question (because of the similar prices and specs), so you can be the very first to do this video and get a lot of views. Good job anyway! 👍🏻

[@LeoGibsonGtr]

Thank you Andrea, good suggestion....another good pedalboard to compare could be the Line 6 HX stomp. What's your opinion about it? thank you once more!

[@juanvaldez1305]

Anyone could tell me if you can use 2 delays at the same time? And still have place. For amp, cab and some other effect?

[@LeoGibsonGtr]

Hi Juan, the 250 offers also two effects blocks called FXA and FXB where you can put also a delay effect. Therefore the answer to your question is: yes, you can Thank you for your message!

[@DdumoChannel]

Hi if use it with combo amp like marshall mg50fx which method is the best.

[@LeoGibsonGtr]

Hi, I would say the 4 cable method is the best solution if you want to use you own amp. Thank you for your question!

[@DdumoChannel]

@@LeoGibsonGtr thank you for fast respone. If we use 4 cable method the role of ge250 will be pre stombox and post stombox only right?. So we cant use the amp and cab sim on the ge250. Have you tried using the effect with frfr speaker like the headrush 108/112?

[@LeoGibsonGtr]

Yes, correct, but if you use a real amp you should switch off the amp sim. Yes, I use these pedalboards all the time with my studio monitors that are fear speakers No, I've never tried the headrush speakers. Thank you for your question.

[@MrDG80]

Hai mai provato a registrare via USB? Io ho il firmware aggiornato, installato i driver, impostato le uscite USB su EFFECT, ma ad Audacity arriva il segnale dry, non riesco a risolvere in nessun modo..

[@LeoGibsonGtr]

Hi, thank you for sharing your opinion and experience!

[@only4crap]

if you change the patches (A B C) in the same bank, does it have a gap in the sound?

[@LeoGibsonGtr]

Hi, no it doesn't. To me it seems pretty instantaneous. Thank you for your question.

[@emreq9124]

how can I find free IR's. I want to buy this machine but, a lot of people say that stock stomps are sucks and it needs to be loaded IR's. So is it handy ?

[@LeoGibsonGtr]

Hi, it's pretty easy to load IRs, and you do it with the computer app. As regard free IRs...I don't know...on my website you can find mine...for a small price: www.leogibsonguitar.com/shop-online/p/leo-essential-irs

[@stringbutcher201]

What about the 275 and the 276.003? 🤔

[@MobileDecay]

The levels on this bideo are really bad. I can barely hear you but when the music plays my speakers are ready to blow. The video quality and playing is great though.

[@dancrowell2933]

How can you setup a wet/dry rig with the GE250?

[@LeoGibsonGtr]

Hi Dan, you mean one output for the guitar+amp and other two out for the stereo effects? Thanks!

[@dancrowell2933]

@@LeoGibsonGtr Hi Leo, I mean one output with reverb & delay (wet), and the other without reverb & delay (dry). The wet & dry sides both include the overdrive pedals.

[@LeoGibsonGtr]

Hi Dan, I have to verify, even if I don't think it is possible, as the unit does not provide parallel signal paths. If someone has better info than me, please drop us a message. Thank you!

[@dancrowell2933]

@@LeoGibsonGtr Thank you for checking on this. I appreciate your high quality videos and all that you do.

[@jonathanmonroy10]

Can you upload your presets ?

[@LeoGibsonGtr]

Hi Jonathan, the video is pretty old...I have to check out if I still have them...I'm afraid I override these presets... Thank you for your interest!

[@johnnyguita5465]

Sonho

[@ray66antonio]

melhor preço mooer pre live + efeitos waves

[@BandaVelhosNovos]

Não sei, hein. Live tem Noise Gate, simulação de power, Wah/expressão, efeitos? Hj tá tudo caro, acho que compensa a 250.

[@ray66antonio]

os efeitos de qualidade são da waves e não da pedaleira !!!!!!!!

[@roneiosorio]

Oi Raimundo! Poderia explicar melhor? Tbm li teu outro comentário do acima e não entendi. Tu acha que o Preamp Live é mais negócio? Abraço!