LeoVince LV One Evo for Yamaha MT-09 exhaust comparison

Sound comparison, deassembly and assembly. Change from original exhaust to LeoVince LV One Evo.
Yamaha MT-09 / FZ-09 2017
I don't have any rights on the Music in this video. All rights belong to the artists
Waveshaper -- The Engineer Part II

[@DragonTales129]

FINALLY, A REAL COMPARISON EXHAUST VIDEO. THANK YOU!

[@fabiankranz5810]

Hi, sounding nice!!! Is it getting annoying when driving longer / is it too loud? And do you feel any power decrease with kat and db-killer installed? thanks!

[@SANCEZZ88]

Hi, it is sounding nice, depending on weather and temperature. The exhaust isn‘t loud but has a nice deep sound for the driver. I didn‘t notice a power decrease. I would buy it again, if I had to decide again.

[@simonecorradin9504]

Is it with catalytic converter? Nice vid man

[@SANCEZZ88]

Yes, it has a catalytic converter and its street legal.

[@gianmarcosilva]

Hi, what do you use on the lambda probe thread? it seems you put grease or something...nice video! thanks

[@SANCEZZ88]

I use copper paste/grease to prevent all the screws from corrosion.

[@gianmarcosilva]

ok,thanks, another question.. do you changes any copper seal near the flanges? i’ve heard to be changed (in fb discussion) but in the video I haven’t seen those parts..

[@SANCEZZ88]

You don‘t need to replace the sealing. But you should check if it‘s leaking. I replaced the sealings later, because i used a torque-wrench to adjust the screw torque on the flanges. But if you use the original torque, the flanges will destroy the sealing, because the design is different from original.

[@gianmarcosilva]

SANCEZZ88 thanks very much! the manual says 20Nm (for the OEM) what’s your suggestion?

[@Andrew-tl9gk]

I think the original one is way better because it is more silent. Greetings from the city.

[@SANCEZZ88]

☺️😉 good one. I don‘t like to drive through your city. And it‘s not really loud compared to other (older) bikes before EURO4. It‘s just more bass and dirty sounding.

[@AntonioLopez-gk7wm]

te hace una vibración en la caja del filtro de aire? como un rrrrrrrr .... y al acelerar en marcha que también se aprecia sobre las 4.000rpm?? llevo el mismo escape y en el video en el ultimo segundo cuando grabas el deposito, se aprecia también ese rrrr que viene del filtro de aire, quiero saber si seguro también te lo hace y si es normal...

[@SANCEZZ88]

Yes, that's the case for me too. I often noticed that when starting at traffic lights or when idling, the noise of the air filter has also changed with the exhaust change. No negative effects so far.

[@AntonioLopez-gk7wm]

@@SANCEZZ88 y en marcha sobre 3.500 rpm - 4500rpm al acelerar escuchas como un clicliclicli que viene tambien de la zona del filtro/escape??

[@tristanleite2611]

Did it require any remapping or computer flash??

[@exothermal.sprocket]

If you want to actually remove all the ridiculous restrictions, YES!! Otherwise don't bother doing anything with the OEM stuff.

[@batsyt9113]

Hi! Do you know how to remove db killer on this leo vince? Have the same and really dont know how to do! The btr screw is welded... Thanks

[@SANCEZZ88]

Just use an allen key, it's easy. But I don't see any reason to do that, it would be to loud while driving. I don't recommend it. Or do you want to ride your motorcycle with ear protection?