Railway power lines | The Art of keeping them STRAIGHT

Whenever you travel in a train you might have seen these hanging weights near the poles and a strange connection of wires near to them. What exactly are they? Why couldn’t they just use a simple conductive wire arrangement similar to the normal power transmission system? Let’s learn about the details of auto tensioning devices.
LinkedIn : / sabin-mathew
Be our supporter or contributor: / @lesics
instagram : / sabinsmathew
Twitter : / sabinsmathew
Telegram : t.me/sabinmathew
FB : / sabinsmathew
Voice over artist : www.fiverr.com...

[@yishujia186]

When I was a little boy, I always wonder why there are so many complicated components up there. Thanks for the explanation.

[@osamaabdirahman6149]

How old are you now?!🙄🤔

[@yishujia186]

I am 43 now.

[@omshah9282]

@@yishujia186 and what was your age when you were little boy?!🙄🤔

[@yishujia186]

I was curious about this when I was about 8-10 years old. As I learned more in school as a teenager, I started to know the purpose of the weight. But I still don’t know the rest of the mechanism.

[@omshah9282]

@@yishujia186 thank you. i was just curious 😄

[@ex_pertsophia5876]

* I will forever be indebted to you, you have changed my entire life and I will continue to preach on your name for the world' to hear that you save me from huge financial debt with little investment thank you very much Expert Mrs... Clara

[@nelsonlukiussambo9680]

I think I'm blessed because if not I wouldn't have met someone who is as spectacular as expert Mrs Sophia

[@nelsonlukiussambo9680]

I think that she is the best broker I ever seen

[@salisualhassan7054]

She is real and trustworthy

[@ruthadesina6890]

Yes I'm also a living testimony of expert Mrs Sophia

[@usainimusa2322]

Who's this professional everyone is talking about I always see her post on top comment on every KZbin video I watched

[@gaurav_gandhi]

I have travelled 10+ years in Indian trains and i have daily seen all this mechanism and now i can really understand them, thanks a lot.

[@laurisikio]

I think you should've learnt this already by yourself, from the roof of the train the observation should be relatively easy

[@isolvechess1941]

@@laurisikiosometimes observation itself may not spark the need to understand

[@sriramravi2936]

100 💯

[@LikeAGroove]

@@laurisikio lmao

[@omshah9282]

@@laurisikio why would someone sit on roof of train?

[@shekarlakshmipathi]

Tooo good an explanation. I love the way you start with a problem, suggest a solution, and improve it step by step. Also the graphics is great. Also, the way you narrate is at prefect cadence with appropriate pauses. You are doing great service. I wish I learned these when I was younger, oh well! Better late than never.

[@abirajbindu3057]

👏

[@devanarayans5131]

Well said, I only wish schools too taught this way.. If this topic was taught in school, the teacher would just draw the entire diagram tell what the names of the components and then move on

[@jacobpalmer9247]

This guy puts a lot of time and effort into his animations

[@Wetbread127]

I think it’s a whole team

[@aardvark3d]

A great explanation. Respect to the 3D artist for a job well done.

[@someolddude7076]

Not only does the wire need to maintain a constant height over the rail, it also needs to zig-zag sideways, on a horizontal plane over the rails. If the wire was like a straight line, it would quickly wear thru the pentagraphs single contact point. By zig-zagging sideways, it moves the contact point back and forth, over a bar of carbon at the top of the pentagraph. The video kind of shows this, but doesn’t explain that extra bit of complication. I’m not an engineer, but I play one on TV, so I know what I’m talking about. I also play a brain surgeon. Come see me for discounted rates.

[@vadim4365]

This problem was explained in another video "The Brilliant Engineering behind Pantographs!"

[@jackmclane1826]

You are correct in this point. But I don't see how playing something on TV effects you real life capabilities above a superficial insight.

[@fidelabc123]

Sounds like you watched the other lesics video on cable trollies

[@daved3494]

@@jackmclane1826 Perhaps he was joking.......

[@snorman1911]

@@jackmclane1826 nothing gets past this guy!

[@legitscoper3259]

As European Train driver, i couldn't spot a mistake. Good work. Only thing that would have been lowkey important is how the Panthograph switches wires without getting tangled up ripping the overhead line down. These devices look like a sled, and are installed at the said point.

[@weeardguy]

That depends. Those sleds are only found on section-insulations in The Netherlands. The rest just 'interceps' and 'leave' the current contact wire by raising it from the contact wire that really is in contact with the pantograph. Sometimes, composite-material drive-able insulators are used. Long, cilindrical elements between two sections to create insulation while also being able to drive under them with the pantograph while applying power. For section-insulation, we use those sleds (with a rather large type from RIBE being ever more common). But normal Dutch trains run on 1.8 kVDC only, that makes things quite a bit more easy (and complex at the same time due to the high currents involved)

[@sanjayvaradharajan]

Proof that u r European train driver??

[@Hockeyking86]

Jumper cables were mounted facing the wrong way. Need to be coupled in a “C” fashion facing direction of travel to help prevent the jumper from getting snagged if loose.

[@weeardguy]

@@Hockeyking86 We just don't connect jumper wires like that in The Netherlands at all as almost all of our tracks are double and secured like single track (in professional terms: Double single-track safety). It just means that both tracks can be driven on in both directions should this be necessary. Jumper wires are made with long wires connected to the contactwire, up to the catenary wire (with a stress-loop in between to allow for movement at different temperatures) and then extend over to the newly added wire. Usually we double this wire and you'll see two loops. An even more complex situation can be seen here: www.m-voorloop.nl/modelbouw/blikopbovenleiding/bovenleiding-krul-draagkabel-rijdraad.jpg

[@drnota472]

@@sanjayvaradharajan he has no proof. he is a martian train driver. an alien in disguise!

[@1.4142]

Incredibly clever design just to keep wires straight.

[@frizzby-x]

There’s nothing extraordinary in this design. The idea is to just keep adding more supports. I’m sure a smart 10 year old would have come up with a similar thing if tasked with the right materials and tools.

[@cityuser]

@@frizzby-x Of course they can. But when done, they'd be in their 20s xD

[@PikaPluff]

@@frizzby-x so you can design this? Please, sit down peasant.

[@-_deploy_-]

​@@frizzby-x 🤓🤓🤓

[@Underwatergoat1]

The OHLE is not actually straight. It runs in a zig zag pattern to spread the wear over the width of the pan carbon. If this was not done, the carbons would not last very long.

[@commieTerminator]

Watch from 4:00 . The pantograph isn't having a single point of contact

[@akushwah61]

This was covered in their past video : kzbin.info/www/bejne/fXvFhnxoeZilgrs :)

[@Ben31337l]

@@commieTerminator yeah, you need to have a transition from the old contact wire to the new contact wire, otherwise the pantograph will catch and break

[@sayamqazi]

He meant straight from the side perspective.

[@sayamqazi]

@@commieTerminator Nice username :D

[@WaefanChang]

This. This explains all the questions I've had regarding railway powerlines. I had guessed that the weights were used to tension the system, but I couldn't understand why the braces seemed to have "hinges". I also didn't understand why there seemed to be so much interwire bracing on higher-speed systems. Liked and subscribed.

[@RealCadde]

"Keep it perfectly straight" You mean, perfectly flat... Right? A straight cable will apply friction to a small portion of the pantograph and wear it out prematurely. Cables actually zig-zag to distribute this friction and thus allow the areas that haven't touched recently to cool off.

[@MindTreeNexus]

Please bring more and more topics from Electrical and Electronics background...very interesting and great art of explanation. ✋

[@masternobody1896]

yes

[@masternobody1896]

I want to know how generator make electricty

[@paulrandig]

I worked that out by myself one day when I was standing on a bridge across a railway. When I had got it, an ÖBB Railjet train passed. Imagine my surprise when I saw the exact same train in your video!

[@aetmi]

Yes and the Taurus sound!

[@atg1203]

I loved traveling by train as a child and would stay up all night looking out the window. I used to wonder what the weights were all the time then when I learnt about thermal expansion at school I connected the dots but never knew for sure. So glad my "guess" was correct. Thank you for the video. Great explanation!

[@VidAmix.1]

kzbin.info/www/bejne/gamwn3SmdpqVmck

[@3dplanet100]

Its so amazing how genius and clever were those people (or maybe just one person) who designed all that so the cables dont drags.

[@AnupSingh-kw3ww]

It didn't happen in a day, nor by a single person.

[@joeeeee8738]

Exactly, it's the combined effort of many many people sharing insights, experience and results. You are just seeing the end result!

[@bmxscape]

i bet you can imagine what they had to do before they realized they needed a more advanced design

[@stormtrooper9404]

It’s not that is nuclear fusion either! These systems were finalized in the 50’s with little newtonian physics and more medieval ingenuity… You know… 40 years after Einstein presented his theory of General Relativity!

[@michelpereira3194]

This video should be used in every railway school!!! Schools use the same old methods since the 60s' with pictures in books with 1000+ words whose understanding depends on subjective aspects. Teaching methods have to evolute with society and also adapt to the students and not just the opposite.

[@nhytg376tgyuu765gjmg]

What is a railway school?

[@michelpereira3194]

@@nhytg376tgyuu765gjmg where students get a degree to work in railways, no matter the degree level: operational, technical or university courses

[@gwyneddboom2579]

Well, I wouldn’t… there are a few factual issues with these videos.

[@Mgameing123]

@@michelpereira3194 Everything with the railways themselves right? As the train drivers get educated via the operator

[@sayamqazi]

@@gwyneddboom2579 All explanations are incomplete. By your logic every description of any matter is flawed.

[@neerajs1988]

Thank you for the effort u made.. to understand this engineering conception 🙏🙏

[@sagarrawat7203]

How much an engineer have to think for such a system seems very easy and simple. So many concept and many techniques used.

[@laughingman3777]

Why am I here?

[@JuuwoNanan]

To learn some cool things

[@Osai1234]

because just like me, you found this interesting or it's 3am and you're on your 25th KZbin video or you have simply fallen asleep for the night and this is playing up next

[@karasmonya]

Why are you here?

[@laughingman3777]

@@karasmonya Why indeed

[@LostSox]

r/philosophy

[@Arun_hog]

Also the cable wires touching the pantograph is passing in a zig-zag manner to allow for uniform wear n tear on the pantograph. @3:58

[@Frrk]

That makes sense. I wonder how often the contact strip on the pantograph would have to be replaced.

[@jaye1967]

It's amazing how many engineering concerns need to be taken into consideration to achieve such a simple result.

[@tvoommen4688]

The contact wire, catenary and droppers assembled together reminds me the engineering of suspension bridges.

[@iamdave84]

Yes, very similar concept. You want both the contact wire and the road horizontal!

[@-._.-._.-]

Can't imagine how many times i tought of this while waiting for the train. I'm not even subbed to you, but it showed up on my recommended. Thanks a lot!!! Now i finally know.

[@-._.-._.-]

@pana riello It wouldn't even surprise me at this point! Hahaha

[@FreightmareFTW]

This world is rapidly passing away and I hope that you repent and take time to change before all out disaster occurs! Belief in messiah alone is not enough to grant you salvation - Matthew 7:21-23, John 3:3, John 3:36 (ESV is the best translation for John 3:36) if you believed in Messiah you would be following His commands as best as you could. If you are not a follower of Messiah I would highly recommend becoming one. Call on the name of Jesus and pray for Him to intervene in your life - Revelation 3:20. Contemplate how the Roman Empire fulfilled the role of the beast from the sea in Revelation 13. Revelation 17 confirms that it is in fact Rome. From this we can conclude that A) Jesus is the Son of God and can predict the future or make it happen, B) The world leaders/nations/governments etc have been conspiring together for the last 3000+ years going back to Babylon and before, C) History as we know it is fake. You don't really need to speculate once you start a relationship with God. Can't get a response from God? Fasting can help increase your perception and prayer can help initiate events. God will ignore you if your prayer does not align with His purpose (James 4:3) or if you are approaching Him when "unclean" (Isaiah 1:15, Isaiah 59:2, Micah 3:4). Stop eating food sacrificed to idols (McDonald's, Wendy's etc) stop glorifying yourself on social media or making other images of yourself (Second Commandment), stop gossiping about other people, stop watching obscene content etc. Have a blessed day!

[@Wingedmechanic]

Also mention that the wires are not perfectly parallel to the railway lines under it, rather it moves from side to side in a zig zag manner as we travel along the line. This is done to prevent the wires from rubbing the pantograph in a straight line and cutting a groove in the sliding material.

[@Kycilak]

I believe it is explained in another video on this channel. I believe it is the video about pantographs.

[@badboi888]

The narrator for the animation is speak clearly, should get him to cover the narration for the real life segment too.

[@billmoran3812]

The old New Haven Railroad used a very elegant design that reduced the need for intermediate supports and did not require swing arms. It was a triangular shaped wore arrangement with two catenary wires on the top and one contact wire on the bottom. The wires were spaced by droppers designed to keep the contact wire level. Because there were two catenary wires with spacers between them, the whole wire assembly remained straight in the horizontal plane and could be installed with fewer supports. That arrangement worked well for about 80 years.

[@matteopietrobelli8610]

Can you share pictures Bill? It sounds interesting.

[@xiphosura413]

@@matteopietrobelli8610 If you google "New Haven Railroad electrification" and go to images, you can see a few examples of it pop up. It is a very neat and elegant design! Apparently, the London, Brighton and South Coast Railway used it too.

[@anupvadnere5950]

Rail technology always look simple but there is always depth of engineering thanks to you we can able to understand this depth.

[@danielrose1392]

It looks simple because railways where always about efficiency. 200 years of innovation trying to find the simplest working solution.

[@SamratManna-zi1mo]

I can assure you tht railway Engineering is tough man. 😂. Interesting but tough

[@T00nime]

Hats off to those intelligent brains who proposed these ideas to make our life easy. 🙏

[@PutsOnSneakers]

they spend more time dealing with science instead of a church. That's the best way to ADVANCE instead of dwelling on stories written by people that sanctioned science as witchcraft

[@justandy333]

And this is the design for a simple bit of straight track. I can imagine how quickly the complexity of the design will increase when you add multiple points and diamond crossovers. Very clever people designing these systems.

[@romanieo]

Very happy I'm Subscribed and toggled the notification bell. First-class material in each video.

[@bajaxbajax910]

good video. I like the on-camera segments, I like seeing who is behind the videos I watch. Makes it clear you're someone who enjoys the subject matter, not just a content farm. Also a good physics demo too, haha.

[@justalurker66]

I agree. The "practical" demonstration is better than having all animation / CGI. It offers proof that the wire will sag under its own weight and cannot be level without the additional support. Theoretically one could create animation that arched the wire up between supports. A practical demonstration shows why the wire arches down. My local electric railroad has constant tension complex catenary with each arm pulling the wire left or right from center as well as supporting the messenger wire above and contact wire below. At the transfer points between wire segments each wire rises upwards from a middle point where the wires are level. Constant contact against constant height constant tension catenary. Places where the power source changes from one substation to another are designed differently so the pan does not short the two circuits (but that is beyond the scope of this video).

[@albertocrescini2076]

Amazing! Could you also tell me also how electricity is provided when train is changing railway network? For example, when you're crossing international borders between Italy and Switzerland, you're switching from RFI to FFS, and therefore electricity is provided by the new railway infrastructure company (FFS) and not to the previous one (RFI) anymore.

[@sw6188]

Between the two networks there will be a 'neutral' section (no voltage) where the supply from one country finishes and the supply from the next country starts. The locomotive driver will know that they need to coast between the two sections. If the two networks are the same voltage and type (for example 25 kV AC) then the loco just continues on. If there is a difference in voltage or supply type (maybe one is DC and the other AC) then the loco has to be a 'hybrid' type which can deal with the different systems and it will automatically switch to the different voltage or system.

[@BritainRitten]

I love Lesics incremental approach to arriving at the solution. By the time you get to the end, it's clear it couldn't be another way!

[@hadri1]

I always love these explanations! Watch out for pronunciation, for example 2:10 it’s quite hard to make out what you’re saying. The content is still amazing though.

[@laurisikio]

that's why the bigbrain behind these amazing videos rarely appears in the videos himself

[@OmegaGenesisTrueEarth]

Very informative animation. Great design! The ice storms must be an issue with all those wires though... Self powered trains have their advantages!

[@ronb6182]

And disadvantages also. Batteries don't last long and diesel is why we have trains Disney made a monorail but that requires raising the rail above the ground way above. Sky bus was a big failure in Pittsburgh no one wanted it in their neighborhood. 73

[@jackjack0]

Great video! Another interesting thing: looking down from straight above, the train power line is actually not perfect straight, it 's intentionally a slight zigzag horizontally. Thus when train progress, the wear on the train pento will be evenly distributed in a range, instead of a single cut by a perfect straight line. In this way the life span of train pento will be greatly increased.

[@nambam5409]

that makes sense, nice!

[@veyrondarren1064]

I can't even imagine how I will become an engineer without this channel

[@CraftyFoxe]

A lot of people are interested in this!

[@Wilge_Zomer]

Oh hi, love your videos!

[@paulwilliams5208]

"perfectly straight" WRONG you want "perfectly level" straight is left or right - "level" is up or down (perfectly straight wire wears a grove on the contact pad on the pantographs)

[@sinatra7407]

Engineering precision there.

[@esupermansan7623]

The amazing animation and the level of knowledge provided by you that too for free. God bless You. People like you make the world a smarter place.

[@Chucklesrailarchive]

As a train driver in the uk we ran trains from 1955 to approx 2015 with the pre tension system. However there were two catenary wires plus the contact wire. There were some problems usually in the summer but mostly worked ok.one I think you missed was that the wires are not straight they zig zag which sometimes caused trouble when detached from the span wire or cantilever arm. Also don’t quit understand your illustration showing a break in the contact wire is a bit misleading if it breaks you will most likely rip the lot down when a train comes along.

[@albertbatfinder5240]

Two questions: 1. How long has this system been in use. I only noticed the weights about 30 years ago. Have they always been there? 2. I always wondered how long the wires and the pantograph last. It seem the friction between a speeding train and a cable would be huge. Are the pantographs made especially soft so that they take all the wear and tear? I mean, you don’t wanna replace the conducting cable too often.

[@mif4731]

They explain this in their other video about pantographs

[@revzzrider]

SIMPLE YET COMPLICATED, OR COMPLICATED YET SIMPLE !! Beauty of Engineering & Technology

[@oskarsrode2167]

I've actually never wondered about this, I just looked up and observed and drew my quite correct conclusions. Btw, Railjet is awesome.

[@satyam9267]

every one is claiming that they are first but problem is those all are first

[@vitalikkouen]

What a great and informative piece - it makes it so much easier for visual learners to comprehend new information! Keep up the great job, guys!

[@Grid56]

In the UK, these pulleys are slowly being replaced by a circular system similar to the ones used to rewind your garden hose

[@paramurowdran591]

Very impressive and useful information I've ever learn from anyone, good going, congratulations,keep teaching more ,,

[@JatinS-yt]

Sometimes it feels like engineers have single handedly stabalized the world, otherwise it will fall apart.

[@harshith_takkala]

Yes of course

[@aaronbredon2948]

Wires can never be perfectly straight - they will always follow a catenary curve. The point of the complicated double wire arrangement is to minimize the actual sag by reducing the distance between supports.

[@KurtRichterCISSP]

Yep, that's what they said. Pretty cool.

[@aaronbredon2948]

@@KurtRichterCISSP yeah. You can't put a pole every 5-8 feet, but you can put a support wire that frequently. The video does a good job of going over why each element is added step by step.

[@joelxavier9025]

The art of keeping them straight....... I'm laughing my ass off here

[@uzaiyaro]

I’ve seen what happens when a weight drops. The pantograph got caught up and melted, doubling back over itself. It’s a bit chaotic.

[@bazoo513]

~ 2:30 - BTW, the shape that arc assumes is hyperbolic cosine, also known as catenary curve. Hence the name sometimes used for those "sagging" overhead wires. (The word is derived from the Latin _catenaria_ - “chain”.)

[@Frrk]

I first thought "ah, it's just the weights and pully" but there's a lot more! Thanks!

[@molosomari]

Hello, can you make a video of how a Concrete Pump Truck works? There's nothing worthy on youtube on the subject...a real time animation of the piston pushing the concrete would be awesome...

[@respect.cr07]

One of the best thing about dude is that he never takes credit for himself when he achieves something. He always respect us, the audience and his team, and he is polite in all his videos. We congratulate ourselves on this

[@stevyn9276]

But one thing that is not the best about you is that you ask for 1k without any videos

[@respect.cr07]

@@stevyn9276 I like it😁

[@stevyn9276]

@@respect.cr07 😌✌️

[@PHPropertyGuy]

I was asking this to myself everyday while going to my Collage school, that was almost 2 decades ago. Finally!! 😎😎

[@ronb6182]

You cannot eliminate all the sagging because of gravity. My physics teacher tried to get rid of the dip on his clothes line and he pulled the wire so tight and the poles came out of the ground. Florida sand don't hold well and even before the poles came out of the ground there still was a dip. As for cable cars the trolley has spring action to keep the trolley on the wires and the counter weights help keep some dip out of the wires. 73

[@MrMatavelhas]

The title is wrong. It should be: "The art of not keeping them straight" Because, while they may be vertically straight, they certainly aren't horizontally.

[@pozitroncz8679]

The simple wiring without catenary is actually used in tram systems. The sagging isn't such a huge problem for vehicles moving relatively low speed.

[@weeardguy]

That's the funny thing ;) Amsterdam almost only has the simple wiring system, while Rotterdam and The Hague usually has the more complex systems.

[@superdau]

I find it funny that you always use the Railjet train model. It is Austria's main passenger train for longer distances and I see it quite often ;) . Is it that the 3D model is freely available or is there any other connection to the Austrian railway?

[@aswith123]

Are u from kerala

[@ssss-df5qz]

Simple Obvious Clearly "Can you think of a solution? Haha, I bet you can't, dummy!" Very patronising channel.

[@eros_1234]

Sir, you teach these topics in step by step What is the name of this technique of teaching a topic step by step????? Please respond, I want to learn this technique in detail so that I can teach to my siblings🙏

[@isimsizoyuncular30orj]

Hear me out. Just connect both + and - from under the train??? (İts complicated to explain just by words and im not that good at english in a foreign speaker)

[@raTTy_auT]

That animations and the explaination was on point. Couldn't have been any more clearer.

[@Yagnik_Jadav]

Literally have goosebumps, as I'm working in the 2X25 KV OHE system.

[@carlosbahia2512]

Muito bom, sempre olhava esse sistema da CPTM em São Paulo e me perguntava como funcionvava

[@M7x0.75]

ficava vendo o contrapeso e as polias durante os congestionamentos na marginal, mas nunca parei para pensar sobre as catenárias. Ótimo vídeo.

[@sunilkhandagale9966]

👍Amazing brillient solution ,abt pully & counter weight use & solve prob ,thanks lesics chanel

[@Dalipsingh111111]

7:05 Is there a way to notice such damages? Or do you simply have to patrol everything and observe?

[@danielrose1392]

The breach shown is more theoretical. In case a wire is fully breached, it will drop and the next train will probably tangle it up in it's pantograph. The redundancy is more helpful in case of a bad electrical connection. In case of a single wire you would get arcing or extreme heat and probably destroy the wire, ending up in previous mentioned tangle or at least a lost continuity. With the redundancy the electricity will use the other wire and everything is okay.

[@lil----lil]

Spend 10x the metal and weight to solve a problem. Kinda crazy when you think about it.

[@MindTreeNexus]

Thanks for the information ❤️

[@la_2elah_2ela_allah]

لا إله إلا الله. محمد رسول الله La Elah Ela Allah. Mohammed Rasol Allah No God except Allah. Muhammad is the Messenger of Allah إنا لله وإنا إليه راجعون..سبحانك ياربنا ياعظيم ياخلاق يارحمن يارحيم ياعفو ياكريم ياحي ياقيوم يا{.الله.} Please Translate This Word's.. أستغفر الله العظيم الحليم الحي القيوم وأتوب إليه. ربنا لا إله إلا أنت سبحانك سمعنا وأطعنا غفرانك ربنا وإليك المصير. سبحان الله. الحمد لله. لا إله إلا الله. الله أكبر. لا حول ولا قوة لنا إلا بالله العلي العظيم. أستغفر الله لي ولكم. حسبنا الله ونعم الوكيل. وصل على نبي الله محمد. عدد خلقه ورضا نفسه وزنة عرشه ومداد كلماته وملئ موازينه لكل المؤمنين إلى يوم الدين سبحانك ربنا آمنا بك وبعظمة سلطانك اللهم تقبل دعاء. Please Translate English.May God Help You.

[@emmerad]

god is a sussy baka

[@tr911tr]

Thank you so much for the explanation! Simple and detailed!

[@FleyxN]

I didn't know that the cable that powered electric train is this complex, i always thought they just strengthen it by making it like a bridge structure. The more you know

[@primelegionaries1413]

me working with trains knowing all this information, still found this video interesting and useful for people who dont know very well done

[@1.4142]

2:10 Face reveal!

[@satyam9267]

this is all ready happened

[@boredgrass]

So, FINALLY learned it just in time BEFORE my 60th birthday! 🤗 From experience with ropes, it was always clear to me how difficult it is to get a rope or a cable straight for a longer time, but I couldn't imagine how one can get an adjustment mechanism that is able to deal with the wear and tear caused by the contact with the *pantograph at high speeds and to be fully functional for a long time! *II thought that pantograph would actually "grab" the wire.

[@SALESENGLISH2020]

Thank you! An excellent explanation. I never thought about it in such detail. Now a lot of things make sense. The next time I travel by train, I will observe the Overhead Power Cables carefully and of course, think of Lesics. :)

[@ajinkyaadake9149]

Sir I request you to make a detailed video on all the Laws of Motion and Laws of Inertia of Sir Issac Newton with detailed explanation with examples

[@parzival9639]

I love how your videos go hand in hand! For example, now your viewers already know how a pantograph works and the basics of power transmission with trains. This makes the current video easier to understand and really shows how much thought goes into your videos!

[@ok-zi4gb]

(not so) funny how this was posted the same week, Yang Yong, a train driver died saving 140 lives when dirt on the rails led the train off track

[@prayashdash1815]

Glad i didn't take mechanical engineering. I would have never come up with a solution like this. xdxd

[@riteshpandey8586]

Fun fact, :- i am travling in training looking on the wire system and watching this video, 😉😉😉

[@aadarsh8306]

Bring back nikola Tesla from grave and let him make the world wireless, Problem solved.

[@TomTom-vi6vp]

⚡️ almost thought we had a great Lesics video without it saying “obviously” but obviously I was wrong. If things were so “obvious”, why the HELL would we need a video to explain it?

[@OficialDeChancelaria]

Fantastic video! Greetings from an Electrical Engineer in Brazil 🇧🇷

[@mikewagner2299]

There's still a little sag between droppers. Getting rid of all the sag is so simple: just get rid of gravity

[@Ruiluth]

But then the locomotive wouldn't have any tractive effort

[@HarmanRobotics]

0:30, 0:53 It is not the temperature variations from summer to winter that necessitate a system like this, but temperature changes throughout a single day.

[@divyanshkalra2068]

'The art of keeping them straight' So now trains too have joined the pride march?

[@louw1992]

This was amazing! I was literally wondering about this yesterday and today it popped-up in my KZbin feed!!

[@512TheWolf512]

Yeah, gay conductive wires would be a terrible problems for the trains

[@RonaldoLapid]

When I was driving to Winnipeg I see lots of this but I see those circular motor things I don't know whether or not moving so thank you for this combination

[@Kremlin_]

Also make a video on why these poles carrying such amount of electricity in them don't give electrical shock

[@harshans7712]

I thought they were just random wires carrying electricity, but their real purpose is incredible

[@Ken11235813]

“Hence no force however great can stretch a cord however fine into a however fine into an horizontal line which is accurately straight.” - William Whewell, 1819

[@padmavathys7284]

I'm wondering that how Engineers could finally get a brilliant design for such complex factors...Hatsoff to those minds...👏

[@jacobhargiss3839]

Trial and error. Thats how most engineering problems get solved.

[@mitukumar6066]

Next time make a vedio about petrol pump machine how they work

[@marcrachmat7467]

Thanks for the knowledge and information. Solid, simple, and to the point. I appreciate your work.