Let's Get TECHNICAL About Lure Making; Technical Perspective On Soft Plastics

Affiliate link for AWESOME Pigments:
www.dipyourcar.com?ref=774
Welcome to the World's Worst Fishing! We are a fishing-centered TV program that does its best to bring you great fishing content & soft plastic bait making tutorials! We hope to provide our viewers with content that is fun, creative, informative and most of all entertaining. Sit back and watch us bring you the world's worst fishing!
We make fishing lures and soft plastic baits. You will find lure making tips and techniques as well as mold making tutorials and color ideas for your lure making
Warning: Making Soft Plastic lures can involve high temperature liquid plastic under pressure and is inherently dangerous if spilled or mishandled. Proceed making lures at your own risk.
Visit us on Facebook & Instagram!!
LIKE & SUBSCRIBE

[@WorldsWorstFishing]

Thanks for watching..TONS of info in this video!!

[@Jewalston]

Great show as awlays!

[@dgs.creates]

Thank you sir!

[@stingrayanallen8936]

Hello my friend cple days late but been super busy how do I get into contact with you let me kno 🤙✌🤙✌

[@blakefletcher8104]

Where do you get your hand pour molds at???

[@stingrayanallen8936]

@@blakefletcher8104 angling a.i

[@aarondavis8224]

You have made beginning this hobby a lot less frustrating. Almost any question I've had you've answered in a video. Thank you. I've wasted very little plastic thanks to your videos

[@WorldsWorstFishing]

That is the whole idea, glad we could help

[@adamcostigan1043]

@@WorldsWorstFishing illuminated nlolimimio Poo Ok.ok.i.oloo O.o Oo Oimml L.o.omo .mmmml.l.o.l Imi M or look oo Mmoo.ooi.oi ok like omlllkkimmm.mmomo.look

[@adamcostigan1043]

@@WorldsWorstFishingI

[@jakesmaster-baits4864]

Just got my AnglingAI fns Mold. It’s perfect other than one ding. And DeadOnPlastix worm blend and 4 colors.

[@WorldsWorstFishing]

Hell yeah

[@danieleatherly1135]

Thanks Chris for the great information!!! Hope that you have a great day!!! Loads of information

[@nmhc12341]

Thanks. I would not have got into making baits without your channel.

[@teamfishlineswfl9099]

Great video the best thing about TONS of great info is you can go back and re-watch it.... Thanks again..You rock dude !!

[@toddchamberlain782]

Great video! This is exciting to learn about. I’m ready to get started.

[@PanfishingJournal]

Great video. Can't wait to try this.

[@bdooley8469]

Thank you, This will help out a lot, I had always tried to keep the molds cooler so I could handle them.

[@aamick71]

Wow!! I have learned so much from watching your video's. My wife and I have been buying a few molds and are getting ready to soon start pouring our first one's starting with the senkos. Waiting on our injectors to come in. I can't wait to use my own baits in the kayak bass tournament that enter. Even thinking of making my own company with my name on it. Lots of my friends have been saving there old plastics so i can do remelts to learn by. Thank you again for showing the steps on how to do this. Love your videos

[@crawfordrogers886]

Great knowledge, enjoy learning from you!

[@calebmorgan25]

Thank you so much for this video. I’ve learned so much from your content. Always killer. Appreciate what you do

[@hooklineandsinker6123]

Excellent video, I really appreciate the thoughtful insight. 🤙

[@charlesfrazier9700]

Man, you’re good. A true blessing for us beginners. Thank you!!

[@rickcarl4493]

your videos are the best. Thanks for sharing.

[@tomecalm7]

Dude, I want to thank you so much for teaching me how to make my own plastics. I have been watching your vids and doing my homework for over a month before I finally bought the things I needed to get started. There were some old OG U-Tail worms I recently re-found that were always killer back in the day. Forgot who made them, and have scoured the internet tirelessly to no avail. I remember specifically a bubblegum with black fleck getting smashed, but could NEVER find anything even close, so I am making my own. I made my molds with 2-part Alumilite amazing mold rubber. I ran some tests with cut up remelt, and caught a 6 lbs bass on it! < HAVE PIC WITH TODAYS DATE TO PROVE IT! And, I'd be happy to send you that worm, as well as a few things I came up with since my Spike It order hit my porch. :)) Just let me know where to send it. I'm not to far down from you in Leesburg. ; )

[@ace724871]

Thank you so much for all the info you put out in the community. Can't wait to get started myself

[@WorldsWorstFishing]

Best of luck!

[@harrydohalick4304]

Great tutorial on temperatures. Maybe an in-depth look at temps used during the hand pouring advanced steps, skin pours ,capsulation and clear dipping could be in our future. Thanks for all that you share, not many would even think of sharing such with the general masses. God bless, and will continue with my learning experience.

[@johncox5681]

Great video Chris! You are so good at explaining things. I always learn something from every video you do.. Thanks

[@WorldsWorstFishing]

Glad to hear

[@youroutdoors5453]

Thank you for making videos like this, I am about to start making my own baits and you're my research. I have more confidence now that I will have a better start than would have without your videos.

[@67bikerbilly]

Learning a lot. I’m new to starting doing my own. Still trying to figure out how what all I need. I’m starting with Senkos. That’s what I’m having the best luck catching fish for me. Thank you for all your help.

[@masonholland3814]

I am trying to start a new fishing business and channels like World’s Worst Fishing is changing my life. Thank you so much for your dedication to making peoples’ lives better and showing them how to create memories.

[@WorldsWorstFishing]

What it's all about!!

[@youtubzkoz]

Fantastic video thanks!

[@fabulous7567]

This is a must watch for lure making crowd. Awesome job Chris!

[@WorldsWorstFishing]

🙌🙌

[@TheWoodzMen1]

Great video I've finally got all my molds and I'm now making fishing baits thank you for all the very informational videos!

[@WorldsWorstFishing]

Awesome to hear

[@foss23]

Very informative video!! Thanks for the education you are giving us all!

[@WorldsWorstFishing]

My pleasure

[@raulal24]

You have answered my questions about temperatures. I will hopefully start to make some in a few days. Still waiting for more stuff that’s in the mail. Thanks a lot for your videos. I have learned so much.

[@WorldsWorstFishing]

My pleasure, this video was exactly for folks such as yourself

[@shawnwhiteman3925]

That was awesome....thanks for the tips...helps out!!!!!!

[@WorldsWorstFishing]

Thanks for watching

[@joegattuso2052]

I feel like I just saw a magician give away all his secrets. Another Great video

[@WorldsWorstFishing]

Haha that I do

[@claudeharridge5413]

Good video, Thanks Chris!

[@envylures5770]

Dude .... dude... like always ya out do yourself... simple effective teaching on point and thank you. Practice makes perfect but helpful lil tips always needed just to speed the learning curve and time. Again thank you for your time and effort in sharing info. You are dah man stay awesome !!!

[@chrismoloney285]

Thanks for answering questions I didn't even know to ask.

[@WorldsWorstFishing]

That's what this video was for

[@jktarheel]

Thanks for doing this!!!

[@Bigwormith]

I had that problem with them pealing apart about a year ago and finally seen your videos where you heat them up! 👍

[@georgedolak8120]

Great vid. Lots of info. Thanks. G.

[@WorldsWorstFishing]

Glad it was helpful!

[@chriscottrell4537]

Great video. Lots of info for beginner's and now you have a video to refer them too for the answer.

[@WorldsWorstFishing]

What's up man!!!

[@toddchamberlain782]

Good info. Watched many times. Very helpful. Thanks again.

[@WorldsWorstFishing]

Glad you enjoyed

[@fishman92772]

Keep up the good work! I appreciate the a masters degree in plastic bait making you have taught me a ton.

[@WorldsWorstFishing]

Haha appreciate it

[@SDGCustomLurecraft]

Fantastic! Adding soft plastics to the SDG Custom LureCraft channel this year and starting to get my feet wet. This was awesome, thanks Chris!

[@WorldsWorstFishing]

You're welcome

[@mithunden]

Awesome video, super helpful for me getting started, one note the moisture is in the air not on or in the mold or items. Change in temperature makes it condensate. Do this in a warm space and let everything acclimate to the temp of the room and you shouldn't condensate, but higher humidity also makes this worse/easier.

[@jonmorrisskates]

Always love watching the videos man

[@macprince5667]

Thanks, Chris. Good information.

[@WorldsWorstFishing]

🙏🙏

[@chrisyount5198]

Thanks for this video lots of info. Learn something new everyday!!

[@WorldsWorstFishing]

We all do

[@michaelboettcher9384]

Best U-tube video on making plastic lure!

[@WorldsWorstFishing]

We try

[@VetBrosFishing]

Great video Chris! Tons of good info.

[@WorldsWorstFishing]

Glad it was helpful!

[@mikeovercash3991]

Very good Technical video Learned a lot

[@jimcoleman9187]

Great topic Hot video!!! Seriously ,spent the weekend working my triple injector which is super heat sensitive. Making sure everything is pre heated and cups of plastic similar temps and not too hot are key! thanks for all the info!

[@WorldsWorstFishing]

Triple is tough to master

[@ianammon6040]

It's always entertaining and informative when you post a video, which is why I've been here since your wife was in one of your videos shooting her own lures. I have a question about the inverse of preheated molds. What are your thoughts on chill plates during the hotter months? Does cooling the molds after shooting them lead to any negative issues with the bait? I've only ever seen you heating your molds and then popping the lures into a bath?

[@pimpshack81]

This was a great video Chris .👊👊👊

[@WorldsWorstFishing]

🙌🙌

[@aslader13]

Thanks for the great info and tips!

[@WorldsWorstFishing]

You bet!

[@johnrich9278]

This helps out so much. Thank you!

[@WorldsWorstFishing]

My pleasure thanks for watching, feel free to share with your friends

[@gpharned]

Perfect timing. I had a friend bring his 13 year-old nephew over who is just starting to pour. Gave him some tips and let him have fun. It is a lot to take in, in one evening. This will help him immensely. Of course he was already a fan of WWF LOL. Keep up the good work! Thanks Chris

[@WorldsWorstFishing]

That is awesome!

[@jamesgray4028]

great information, thank you for sharing!

[@WorldsWorstFishing]

Thanks for watching

[@fishntrade7332]

Thank you!! I almost got all my stuff to start injecting for first time! With a good Black Friday deal on tacklewarehouse and deadon I probably spent $300 or so . I will be working a cold environment in the garage and it’s suppose to get to 8 degrees this weekend . I should probably also heat up my injector or just make sure it isn’t cold before drawing it up? But do not melt the o ring

[@ryanhall9952]

Awesome video as always my man !!

[@WorldsWorstFishing]

Thanks for watching

[@keithholt5955]

Awesome, informative video. Thank you

[@WorldsWorstFishing]

Glad it was helpful!

[@russelljackson4101]

Top video and well explained like usual I think everyone has learned a lot off your channel thank you

[@WorldsWorstFishing]

Thanks 👍

[@miamiwax5504]

First pours yesterday thanks for the help

[@whooots]

Love the info and thank you for making these videos. They are extremely helpful for me as a noob in this arena. I also use DeadOnPlastix and do have a question for you regarding respirator masking. Do you not wear one, and if not why? Would you recommend one just as a precautionary measure? Thanks

[@davidsullivan27]

Chris, for an old man I have learned sooo much just now that I cannot thank you enough. I've been doing so many things wrong and now, thanks to you, I think that perhaps I can now get it right! I made a comment on another of your videos about the MARVELOUS shad that you showed us at about the mid-point of the video. I am still trying to find the hyper shift color you used on the mid line. would you please tell me what that was, or maybe i'm asking for a trade secret. If that's so, I apologize and keep searching. Thanks so much for educating me.

[@rickroberts7307]

Great content, thank you for sharing it.

[@WorldsWorstFishing]

You bet

[@christianwiechelt2670]

Very revealing the video. In some cases also logical.... Thank you for the lessons

[@WorldsWorstFishing]

we keep it pretty logical

[@Kingpod]

Finally i can get back into this hobby. Glad to see this on KZbin. Now i need to find a new injector

[@LarsonFishing]

I’m just getting into this now, thanks for the advice! Anything specific you recommend that you could say you wish you had done at the start? Thanks!

[@lloydmilan9176]

Thanks for the videos they have got me to making baits a good hobby for a old disable guy

[@WorldsWorstFishing]

Right on

[@tracynewman5246]

Great.vid for the beginner temp is everything 👍

[@WorldsWorstFishing]

Absolutely

[@terryrendon9406]

Thank Chris your best video to date

[@WorldsWorstFishing]

Glad you think so!

[@danielfiskarborre9551]

Just great stuff! Love it

[@WorldsWorstFishing]

Thanks

[@stankxbaitco]

Excellent explanation of everything !

[@WorldsWorstFishing]

Sup man!!

[@stefanabt7901]

Hello from Germany, and have a nice year. One of the best videos ever! The perch ist the best bait from You i ´ve ever seen. But did You know, that the burning reaction, of methane or propane, produces water which condenses at the cold mold? The moisture comes not from the mold it is a product from the burning of gas.

[@monsterhuntercharters6365]

Great info.. thk u

[@WorldsWorstFishing]

Glad it was helpful!

[@MadcamPlastics]

Awesome video very informative

[@WorldsWorstFishing]

Glad you think so!

[@cohenmccormick4360]

Heaps of good info there! I give my cups and mixing knives a blast with the heat gun before mixing up any plastisol, certainly helps getting rid of the moisture

[@WorldsWorstFishing]

I agree

[@cohenmccormick4360]

Very handy when you're vac chamberless like me at the moment🤣

[@JasonSmith-bv3yd]

Great video.. Thanks Chris.... I been struggling with the temp of my hot plate.... The one I have gets real hot so keeping it right above warm seems to work best 4 me!

[@dgs.creates]

I've been thinking about trying a hotplate instead of microwave.

[@JasonSmith-bv3yd]

@@dgs.creates I still use a microwave to heat my plastic, but I was talking about the molds on the heat plate..but yeah some people use single burner hot plates for plastic too....

[@sunilramnath9660]

Wonderful Vid!!!! Where do you get your molds to purchase?

[@ontheline3654]

Great video!! So when you have a vac do you vacuum chamber just at the start before heat or another time after heat?? Also no drumroll disappointing hahah

[@caseybronson2224]

Hey man, love your content! I am in the process of ordering some stuff and was planning on using DeadOn brand plastisol. Then it hit me and I was curious, does that brand need the Heat Protector stuff you use sometimes from Lure Works? And does mixing different brand products affect anything? Thanks for your help!

[@nathanchristopher9451]

Thanks for the help

[@WorldsWorstFishing]

My pleasure

[@robfishingkingdavis5653]

That separation of cold pouring then warming was a perfect way of not how to do it 😮. Very very well explained and demonstrated WOW

[@WorldsWorstFishing]

That was the goal 👍👍

[@thelonesomefisherman7425]

You're a good teacher.

[@WorldsWorstFishing]

Appreciate it

[@danabellefeuille8485]

i watched ur video, i made crawfish mold out of bondo,,, heat up like u said ,, poured the brown that i made out of crayons to make color,, the crawdads turned perfect,,, if i keep doing this i will get aluminum molds in few months,,, thanks for all the info.

[@timmoore8591]

Great video!

[@WorldsWorstFishing]

Thanks for the visit

[@exploringt.h.c.440]

thanks for the video, i enjoy the content

[@WorldsWorstFishing]

🙏

[@rexclark9835]

I really needed this I just made my first mold today ! Thank you

[@WorldsWorstFishing]

Good luck!!

[@rexclark9835]

@@WorldsWorstFishing I’m having a problem that my baits are coming out sticky, I think I’m over cooking the plastic because I use a measuring cup and then put it into a separate glassware to cook in the microwave and it’s more of a cylinder shape and I think it’s cooking it through too quick any advice or tips ? Thanks !

[@WorldsWorstFishing]

@@rexclark9835 overcooking will not result in sticky baits, you need to mix more thoroughly

[@jaxtonh5618]

I just ordered my last thing to start making soft plastics so I should start this week

[@lanman90210]

Same

[@WorldsWorstFishing]

Welcome

[@binkwood]

This was an informative video. Something I struggle with is shading while making laminates. I've seen your table test and that makes sense but often when I get to that point my colors wash each other out. I understand the saturation level of both colors needs to be similar but my colors still wash out. I don't have a problem making one color opaque and the other transparent and getting a standout contrast, but using two alike shaded colors like green and purple they wash each other out. Is the key when using two transparent colors of similar shades using contrasting colored flake? I have experimented with colors with flake and without and it doesn't seem to make a difference but maybe I'm using the wrong flake colors. It gets kind of costly to ruin two cups of plastisol over and over looking for a new combination that works well together and I need to understand the principle in building two colors that work well with each other. One positive; I damn sure don't need to invest in a triple injector! LOL

[@mikeockler7121]

I work in IT, man...technical is what I do lol thanks for the vid!

[@WorldsWorstFishing]

Sounds like it!

[@theduck3977]

Love it keep it up

[@WorldsWorstFishing]

Will do

[@ITigerbaum]

"Boutique" baits, like where guitar pedals went. You sir, are amazing!

[@Fishingmaniac1]

Soo helpful, this past fall got a vacuum chamber and this winter I got a hot plate to preheat my molds and injectors it makes a huge difference especially where I live it’s gets sub freezing a lot, I’m still having glitter curling issues but I’m wondering if cold glitter in hot plastic can be the reason maybe I should preheat the glitter containers so it’s not 40ish degrees or put it in before cooking plastisol and slow heat it

[@WorldsWorstFishing]

Flake curling is just part of it..try and keep temps low as possible to mitigate.

[@ballzybaits4414]

How do you do laminate and keeping the layers to stick to each other in a silicone mold?

[@jonathancook3880]

Hey Chris - how long do you let your baits sit or air out generally before packaging them?

[@Dingleberry262]

Another awesome vid brah

[@WorldsWorstFishing]

Hell yea man

[@charliesolis8681]

Did my first pour yesterday with the dead on saltwater plastisol. I definitely experienced cold cracks and dents. Warmed up the mold and the second pour came out a lot better. Trying to find a more molds for saltwater baits possibly a shrimp pour mold. Any ideas? Thanks for always putting out great content.

[@WorldsWorstFishing]

To be honest I do not know where to source many molds like those

[@robertkennedy8828]

What do you recommend for cooling do you turn the griddle off and let everything cool or take the molds off the griddle and let them cool ?

[@allenhammitt5092]

Great video. I'm looking into getting some custom molds made. Any suggestions on good companies to go with?

[@WorldsWorstFishing]

I'm not sure man

[@justinmatus4481]

is jacobs molds a good company to buy molds from, because I noticed the sprue on there molds are different from any other ones. do they all work the same with the bass tackle injector?? and with bass tackle dual injector??

[@jasondeblock3890]

Thanks for your tutoring Please color match reaction innovations hematoma

[@timothyleger4385]

Yes sir ! A lot of great information on this video !!👍👍😉✌😁🇺🇲🇺🇲

[@WorldsWorstFishing]

We definitely tried ha

[@allthekit...]

I love your videos thank you for making them 👌🏻, you are very good at being clear and easy to follow. I believe the moisture you demonstrated on your mould is a by-product of burning the propane torch. C3H8(g)+5O2(g)→3CO2(g)+4H2O(g)

[@DRTMaverick]

You sir are correct- the water came from the combustion of the propane.