Let's Get The Filthy W Outta Here

[@Jpaydirt]

Just throwing some shade back on my aussie friends, it's all in fun LOL

[@cameronjohnston5748]

No comment about the way its done loading up, just blame the stupid blunderment enforced ideas. I saw the video where you explained. There will always be different ways of doing the same thing.

[@bruceduncan9065]

Are you ever going to finish the driveway gate 😮

[@ronpearce5777]

I love these haul videos. Being in Englandland we get to see a lot about your country from the landscape, infrastructure to what else is being by road. Wide open plains and the mountainous regions in the distance. I tend to keep an eye out for all the other plant around building roads and housing as you pass by. Ive been to the cat dozer plant some years ago at Peoria and the JD Combine factory. Wow what set ups. Better not say too much or you will start charging us a sight seeing fee😂 Brill vid and the music is always great too. Thankyou.

[@Jophes509]

When I was in southern California the biggest worry we had was watching out for large adams apples on the ladies of the night. Now it's fires.

[@CarlMichler]

Jeff I’m glad to see another old guy still working hard using the old ways .Im 71 years old still running iron and pulling wrenches. Started running equipment when I was 16 OLD GUYS RULE.😎

[@grandpajim329]

😏😏😍😍😍😍😍 THANKS AGAIN JEFF, LOVED THE RIDE, NICE AUDIO, BEAUTIFUL SCENERY!!!!🙏🏻🙏🏻

[@MC-re2ry]

From the time I was too young to reach the clutch and brake pedal of the F 20 but it was slow enough Dad and Grandpa let me drive it anyway . . . it's a good feeling to pull a piece of equipment back into the yard.

[@MrMan5014]

I’ve never seen a trailer like this one until I saw it on this channel…it’s like a mini beaver tail!..and the dolly in the back is golden!..nice setup!..

[@matthoward923]

Once again a very successful relocation of yellow iron. NO trash cans were harmed in the making of this video.

[@colinkennedy8730]

Team well done ,just listen to the KW purring like a kitten running sweet as a lollies 👍

[@calitrainman]

Do you need to open a valve or do anything to make the scrapper turn while being towed or does it just turn? Sorry if it is a dumb question

[@richardhoneywell7411]

Great video Jeff always enjoy watching you move your equipment from the job site to home. Thanks for sharing stay safe Jeff.

[@robdixon945]

Thanks for the show guys 🇺🇲 🍻

[@seanmeyer6243]

I've come to realize that people THINK they know more than they ACTUALLY know thus making themselves seem dumber than those they wish to correct. Keep on truckin Jeff.

[@reevinriggin3570]

Wow. A scraper with brakes that work.....I have never seen one that old where they worked. Normally I am just bonzai'n off the back of the jeep. Good on ya!

[@gregbridges2365]

Back in the day we had to break 31B’s and C’s in half to haul em and I was always envious of you guys out west with your scraper dolly’s

[@georgeenriquez612]

Idaho a beautiful state. Nice hauling Jeff👍🏻

[@malcolmyarnold6172]

Thanks for sharing mate love watching your videos

[@larrytucker2938]

Thanks for the lift, sort of miss the thinking time on the road.

[@CarlMichler]

Jeff the first scraper I hauled was a Wabco C pull all cable machine. I hauled it from Phoenix to Las Vegas Nv in 1972. Power unit was a MACK with a 673 thermodyne 250 horse no Jake 5&3. Was only 18 years old. Knowing what I know now there’s no way I’d let an 18 year old kid do that.😲

[@glindabeaven6805]

Well you know what they say "If a bullfrog had wheels he wouldn't wear his ass out a hopping" so what works is what you do as far as i see it Jeff wins again

[@jeffmoller1743]

Maybe Mr. Duffy can post an instructive video so we can all learn how it is done in the land where toilets swirl backwards.

[@martymorse2]

Aussies always have an opinion and they think they're alway right. Culture or lack of. Not sure which.

[@aussiebloke609]

@@martymorse2 We're not all that bad. The US has its rednecks, Oz has its bogans, six of one and half a dozen of t'other....and these are precisely the type to comment as if they know what they're talking about. The rest of us have some idea of what we don't know...and recognise that Jeff's been doing this long enough that he's got to have a reason for what he does and how he does it.

[@sydneyshinshi]

@@martymorse2 mainly the trucking class.

[@johnwilson9270]

HEY, dont put us all in the same dunny, half of us are still using long drops !!

[@martymorse2]

@@sydneyshinshi My apologies. Should not have made such a generalization. Excellent point about the trucking class.

[@greggb1416]

Well Jeff, regarding Mr. Shaun Duffy (from down under)…, as the saying goes, “it takes all kinds”.., it’s just that we just don’t need his kind up here in this channels realm. It’s good that we see Kurtis & Karen of Cutting Edge Engineering KZbin channel, to know there are some great folks down under. Loved seeing the 637’s making their way home. Thank you sir.

[@thebegrsshow]

Creating yet another International Incident Jeff? You might want to turn in your Passport, because by now, you know that darn thing ain't no good no more anyway...LOL !

[@Dennis379c16]

Looks like another day at the office. Be safe!

[@jrhendershot1936]

Sure love listening to that big cat run in old kenny sounds big and ready to work

[@hangman396]

I don't care if you are using old shit to get a job done... That is still the best way to move scrapers... And Jeff Wins again... I've had to do that system a lot over the years, and it still works best today... Putting a scraper on a standard RGN leaves too much overhang, and opens you up to a lot of liability... Again that way in my book is Safer, and reduces your liability...

[@tedhansen3846]

Beautiful country!

[@michaeltrinkle4197]

Thank You Sir for the trip home.looked to be uneventful. that's a good thing.the fw not wanting to get up an go is kinda like me on a cold morning.i tend to be unresponsive most of the time.enjoyed the scenery and sights.another is ok by me.i know it takes alot more time to setup and edit.its your call.sure glad your done diggin.hated the breaking stuff though.those rocks are near as hard as my head according to my better half.ok.my boss.keepem coming when ya get time.

[@alanlaub4890]

I believe that you should be required to sit in the seat with the hydraulics operating, steering the tail while transporting.😂

[@williamgleaves1954]

Give 'em hell, Jeff!

[@clydeacor1911]

It still amazes me that Kenny doesn't even poof the slightest bit of smoke when you're grabbing gears and putting your foot in it. Unless it's like your strobe lights and just an illusion Lol...

[@cerberus0413]

I was always a bit curious why you use the dollies instead of the double drop, but I always assumed it was an issue with the deck length/OAL limitations so instead of buying a longer more expensive deck just for the scrapers, the dollies work and are cheaper, if not a bit more tedious to load.

[@rsgpartsdivision]

That entrance ramp seems to force you to charge right out there! We have lanes here. Gives you more time to argue.

[@The.Dark1365]

Never drove a big truck for a living. But I bet I could operate an FW. lol

[@frankryder9325]

Hi Jeff great video, we hav a lot of Super Truckers over here ,, ask Mr Duffy if he has ever driven for RA Brooks in Little Rock coz I have !!!1

[@robertquast9684]

You ever wonder how you got by with the original transmission in Kenny after going to the new one

[@The.Dark1365]

You know the motto, GoPro and go broke.

[@JoeSmith-wd8ks]

Hey Jeff happy new year to you and your family , Nice video , enjoyed the scenery , gee it looks like it’s a dry place on the plains . It seems like KZbin has plenty of experts who like to criticise unfortunately. I have respect for you you have experience man and that is what matters . I like your old gear it’s reliable and you can fix it yourself . Hey a question I recently bought a good condition Komatsu D155a , it has an engine not too much different from your D9G do you think that a switch blade turbo would be a good idea for it ? I’ve not done any heavy work with her yet but going to do a full service on her first . Let me know your thoughts . Power is about 300 hp at 1600 rpm , 1159 cu inch max power 320 hp at 2000 rpm but fuel use goes way up . Hopefully you avoided the cold blast . Sorry for the disaster in California . All the best from New Zealand

[@two-strokesmoke7289]

Your system and or equipment seems to work very well......😁😁😁😁😁😁😁

[@kevinking3402]

Just curious, do your diff locks work on the scrapers? Seems like they were the first thing disconnected by the outfits I worked for (Operator missuse )🤣🤣🤣🤣🤣

[@alandawson2813]

Very cool video from kiwi land. Love the trailer set up, in kiwi land I would imagine with all the rules and red tape and hoops one has to jump through this type of trailer would not be allowed plus would need at least 3 pilot vehicles and more permits than your clipboard can hold. Nothing wrong with old iron. It will still be going when the new crap is been melted down and turned into those stupid EV thingies.

[@mischef18]

Enjoyed the journey bro but there was a suspicious looking vehicle followed you all the way. Ken.

[@michaelmcclure8673]

Mr Paydirt how long does it take to get back to the ranch ? About 2 hours ?😊

[@meirionevans5137]

Hook them up, bring all 3 home same trip, they'd still troll ya! Split view is cool, made my Saturday thanks.

[@agviator]

Better than bugs bunny and Wiley coyote on Saturday morning

[@richardlincoln8438]

It's curious isn't it that nobody is stepping up with buckets of cash to show You how to get things done the way they would like to see it ? Thanks again and Best Wishes to You and Your Family ! #JeffWins #EveryTime

[@thomaspetroff9117]

👍👍 Thanks for Sharing Jeff! What happened to the FW? Just being stubborn? Been moving snow myself since Sunday with my 1981 580D hoe(2wd) Got a foot of snow/ice on the ground. Fun Fun Tom

[@scottdominguez7939]

Do you ever get stopped by DOT for an inspection while hauling that?

[@johnbaskett2309]

Dumb question Jeffrey. Although I've heavy hauled on and off my entire life, I never hauled a large scraper with a dolly. My stupid question is....."Is it necessary to have your front brakes released on the scraper during transport".

[@Jpaydirt]

no, the scraper brakes are set. most scrapers don't have brakes lol

[@richardlincoln8438]

​@@Jpaydirt When i was at Kerr McGee, i went to the shift foreman about a brake problem one day..... " Brakes ??!? Hell, You're supposed to go not stop !!! "

[@likeaboss860]

Real Americans love there old garbage and keep it running like a sowing machine

[@garyharrington5300]

Thks for the ride

[@dennisholst4322]

Prepare to mount

[@billstoltz7203]

Big. Cat..s are talking. Agean. Yes!!?? Go jeff

[@bruceduncan9065]

Looks like she needs a bath 😢

[@woodhonky3890]

Jeff wins!

[@jscott6058]

Jeff, I know you’re tired of hearing about lowboy trailers but I don’t understand why you just can’t load it upon a landall. you can just drive up the back and just send it. Just kidding to the rest of your day 😂

[@jacknuzzy279]

I gotta tell you big guy your truck sounds so good it so nice to hear your smooth as silk shifts and no bla bla bla every time these guys with Jake’s try to shift with them and they have absolutely no idea what a brakesaver is I guess I’m showing my age because I love the marbles sound on the filthy whore too be safe big guy !

[@neiljordan5487]

I wonder , does Shawn own any equipment??

[@schadenfreude2555]

Hello, Jeff. Now I have to ask: What is the Fuggnutz brand? Is it one of the new ones coming out of China? Or is it one of the new magical electric types that solve Global Warming? And where do you plug in an electric Fuggnutz overnight so it will not act like a GoPro next day and suddenly shut off? And can you repair your new Fuggnutz yourself, or do you have to call in the dealer to reprogram the computer every time you add oil or fuel? [asking for a friend].

[@vancrawford4064]

Well that go pro really sucks.

[@skipman8yard]

Great vidj Jeff cat power proper job 👌👍👌👍👌👍👌👍👌👍🇺🇸🇺🇸👨‍🌾🦅🦅💯🏴‍☠️🏴‍☠️🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧🇬🇧

[@chuckh.2227]

Stupid Go"Pro"!

[@jeromekerehi1580]

🇺🇸👎🏾