Let's make the Legions Imperialis Token set WAY better.

Hey folks, as promised and a day late for WIP Wednesday, let's make these Legions Imperialis Tokens look nicer and last longer.
I was disappointed with the thin card tokens that came in the Legions box. So I grabbed the following;
1" Circular Craft Punch
Scissors
1" Bottlecap Stickers (mine are from Beadaholique on Amazon)
Sharpie
Clear Elmer's Glue
A Dollar Store Bead organizer
...and went to work. Let's make these things last and look a lot nicer!
GMG is publicly supported. Become a backer on Patreon to ensure new content and that the Studio can continue: / guerrillaminiaturegames
Join us on DISCORD: / discord
Want to challenge Ash to a game? Email him at [e-mail] or message him through his Facebook Page!
Follow Ash on Facebook: / outofthebasementintoth...
GMG Measuring Gauges and Tokens available HERE: deathraydesigns...
GMG T-Shirts and Hoodies HERE: shop.spreadshi...
Music used via Creative Commons "Benji" by Dyalla, "Lofi Mallet" by Kwon, "Groove with the Wu" by Jesse Gallagher & "Mullholland" by King Canyon.

[@atragonx7939]

Glad you went with the standardized "a what point in this cult movie did i finish this project" metric.

[@euansmith3699]

Ash's new channel, "Canadian punching things".

[@caseyrogers7538]

Coin capsules for coin collectors are also a possibility. That’s what I did for making infiny tokens

[@euansmith3699]

Thanks for that suggestion; I'd not heard of coin capsules before.

[@IAcePTI]

Same... got 500 from online chinese store way cheaper than this ones and the plus is that you can change the images any time. The downside is that they dont look as good. Btw my ocd dont support that white part on the cuts... for the sake of god... do some edge bleeding margin xD Actualy... cabochons are the ones that make tokens prettier, as they are glass that magnifie the images , make them pop up. The downside is that they are rounded and not flat, so you can just use for 1 side

[@AltroseSenar]

Those are what lots of people use for the Arkham Horror LCG as well. Love the way they feel when using as well as how they look.

[@kettleonsonna]

Do I need to do this? No. Will I spend too much on 3rd party tokens? Yes. Am I still going to spend £20 on craft materials so that I can do this? Hell yes! Love this hack. Thank-you

[@katfezza4570]

I did this with my This is not a Test tokens after seeing yours in your older videos. Those clear domey sticker things are great.

[@kettleonsonna]

Done. Stickers on both sides to protect the card and I think they look better. Shamelessly sent this around my gaming group and recommended to another Epic KZbinr with a link to your video. 😊

[@GuerrillaMiniatureGames]

Glad you liked it!

[@captainparty]

The nastiest surprise of the box, such a weird decision when other games (Necromunda for example) have really nice, high quality tokens.

[@spied9]

That was an awesome and cool way of using printed Legions Imperialis tokens very unique!!!

[@mzm1457]

Very useful! Not many people do gaming aid videos so that was pretty cool.

[@jonathankilby6636]

Really nice work there. I'm going third party tokens myself when i can finally get the boxed set in the new year

[@kcaudle52]

These are the cheapest set of "tokens" GW has ever released. I could not believe they actually released something of such low quality.

[@fozzyami]

Cos they're probably going to release a "premium" set of plastic tokens as an upgrade. Gotta milk that cow.

[@shaunlobsinger]

Yea these tokens surprised me. I have paid much less for table top games with decent tokens like Crisis Protocol

[@MuleKickin]

This is exactly what I needed without knowing! I'm gonna do this to my Killteam Ashes of Faith tokens. Cheers Ash 🤘

[@49SABRES]

Came for game aids tips… left being reminded of how emotionally scarring it was to see ghost ship as a 15 year old at a Halloween house party. Totally didn’t remember Éomer was in it. So I got that going for me. 😂

[@GuerrillaMiniatureGames]

It has an unreasonably stacked cast.

[@49SABRES]

@@GuerrillaMiniatureGames gotta love the Mudvayne playing randomly in the movie. Was just looking at the 2005 Hot Topic tour in Buffalo and Mudvayne was only behind Maiden and Sabbath. I was like I don’t remember them being that good. Apparently they were that good at that time hahahah

[@AyeDubbleYoo]

Wonder if it's better to put the bevel on the other side so there's a gap to pick them up with?

[@BigTuna762]

Loving these new types of videos :)

[@kh0rney]

just ordered some MDF tokens, I should have held out for this video d'oh!

[@aaronst.pierre3080]

For the objective markers did you not want the darkened out lettered versions for the opposite side? Instead of the blanks?

[@shinankoku2]

I dig the funky music

[@bshean72]

You have very good printing

[@GilesTimms]

Thanks for the info. I guess I’ll have to watch Ghost Ship now…

[@GuerrillaMiniatureGames]

Watch Event Horizon first so you can line them up!

[@GilesTimms]

@@GuerrillaMiniatureGamesCool, will do, thanks!

[@Based_Lord_Humongous]

Event Horizon is mandatory viewing for Warhammer fans, since it's about Mankinds first foray into the Warp.

[@jonmattison3939]

Did I miss where the larger token print came from? That which gets punched and bubbled etc?

[@GuerrillaMiniatureGames]

It’s just the sheet out of the box. You just don’t punch them out, you cut them from the board.

[@jonmattison3939]

@@GuerrillaMiniatureGames Oh, I thought the point was that these were "larger than what came with the game" as you implied that the originals were "too small and hard to pick up" Sorry for misunderstanding.

[@GuerrillaMiniatureGames]

@@jonmattison3939they’re printed larger than they are punched out of the box. I’m punching the whole image as opposed to losing the margin out of the box!

[@sonofraven76]

@@GuerrillaMiniatureGames Got to say this was confusing me too. Good answer!

[@WebsterMk4]

I'm really enjoying your #LImp videos. Great content. Thank you 👍🏻

[@WIGHT_METAL]

Do you think putting the adhesive caps on both sides is worthwhile? I’m thinking it might be easier to flip regardless of what side it’s on, and extra durability? Overkill perhaps?

[@kettleonsonna]

I've done mine on both sides. Didn't like the finish with it on only one and it will protect the "card" better.

[@WarmasterPainting]

Great idea.......Thanks

[@IainNorman]

Shame on GW that we have to do this, but this is a great fix and looks great!

[@LaBambaMan]

This is a pretty cool trick. I wonder how long before we start seeing tons of STLs for the tokens cropping up (if they haven't already)?

[@captainparty]

I’ve already seen a few, and lots of companies are doing laser cut acrylic too, ordered some from Art of War studios, was cheaper than the hole punch!

[@editor2766]

Absolutely going to do this!

[@BrewsGamesRides]

This is the good stuff!

[@raymondwright5996]

Would coin cases work for these token? I’ve seen people put the Marvel Crisis Protocol tokens in coin holders.

[@VicodinElmo]

Love this little hack!

[@jefffrasch7994]

looks like the symbols on the old battle ship gothic dice

[@GuerrillaMiniatureGames]

That’s exactly what they are

[@powellhall9794]

😎👍

[@KevinSchelley]

Is there a reason you didn't put bottlecap stickers on both sides of the tokens?

[@GuerrillaMiniatureGames]

I wasn’t sure I’d have enough to do all Of them!

[@graemebeaton8019]

Nice!

[@psybilliah]

the original Infinity token hack!

[@waynehood8836]

Worst set of tokens they’ve put out, even the insets in White Dwarf are better than these

[@sirbobulous]

Corvus Belli 3mm thick tokens these LI things are not...

[@sigpi222]

No link to a printable file?

[@GuerrillaMiniatureGames]

I don’t own the file. These come in the game box.