Lethal Performance presents THE BOX: A fuel pump controller from DivisionX

The DivisionX Box is a universal wiring solution for return style fuel systems running up to three fuel pumps.
Follow us:
Facebook: / teamlethal
Instagram: @teamlethal
Visit our site: www.lethalperf...
And be sure to hit the LIKE button and the SUBSCRIBE button for the latest videos!
The Box allows you to run 3 pumps at all time OR a staged setup with a Hobbs / Pressure switch.
The Box is available by itself or as an available option on our Lethal Performance dual & triple pump fuel systems.
Click here for more info & breakdowns:
www.lethalperf...
Key Features:
Relays are rated at 50 amps (typical fuel pump relays are rated 30 to 40 amps)
Circuitry uses "Plug And Play" design
Three integrated 30 amp replaceable fuses
Status LEDs on relay OUTPUTS.
Inline 80amp Fuse for main power wire to controller
4 Gauge Main Power Wire
12 Gauge wiring from Controller Box to Pumps
OEM 6 Pin Connector for Plug and Play compatibility with all DivisionX Fuel Hats
Fuel pump trigger system works with switched 12V+ on/off (9V+ minimum)
Individual fuel pump output connectors for each relay.
What's Included:
Division X The Box Fuel Pump Controller
15ft 4 AWG Power / Ground Wire
4 AWG Ring Terminals
7ft 12 AWG for 3 Fuel Pumps with Plug and Play Connector
In-Line Fuse Holder with 80amp Fuse (Main Power to Controller)
15ft Wiring Harness for Pump Trigger / Hobbs / Pressure Switch

[@stevearreola8217]

💯%bad ass kit 🤘👍and help

[@high-rise8505]

This is amazing technology 👏 thanks for bringing in the best performance parts for our pleasure! 🇺🇸

[@Lethalcamp]

Thank YOU for the support!

[@Twobarpsi]

What quality! Those power wires are yuuuuge!

[@Lethalcamp]

That's what she said...

[@Zander13Productions]

I need this 💪🏎

[@DMANN007]

Great product. I need this. Now what do i do with the brand new old harness set up thats still in the box lol.

[@Lethalcamp]

Keep it as a souvenir? lol

[@deedodson1400]

where is the best place to mount the box its self

[@Lethalcamp]

There’s really no best place to mount it. We’ve mounted the box in several places on cars of ours. As long as the wires on the output can reach the fuel hat you’re good to go. My 03 cobra has the box mounted in the spare tire well. Our 2022 GT500 it’s installed in the panel next to the rear seat. Let us know if you have any other questions. Thanks!

[@danielm94437]

how the pump wiring from tank go the box if the fuel hat is on the tank? out of tank pump relocation or fabricating a hole or something?

[@Lethalcamp]

Not 100% sure what you're asking but yes the fuel hat assembly sits in the tank, however it has wiring on the top of it for the pumps. That is where The Box would get wired in. If you click the link in the description you can check out some pics! :)

[@omarrivera773]

does this replace the FPDM thats in the trunk?

[@Lethalcamp]

It is not just a drop in replacement. It is for use in a return style configuration with the aftermarket fuel hat. This would replace the larger return harness that is usually used in those systems.

[@Khalidsvt101]

are those real bricks?

[@Lethalcamp]

No they're not. It's a panel made to look like bricks.