Lets Get This Steam Pressure Washer Steaming Again

[@bradhayworth2926]

"The reason I bought this off Andrew, I know he takes care of his equipment." Hahaha!! I laughed out loud. He does take care of his equipment, but only after he beats the living snot out of it!! But that's what is so entertaining...

[@zetnakatel]

"bought off Andrew I know he takes care of all his equipment" XD Hahahaha...

[@tomsawyer4776]

I am surprised that you bought it..... Andrew usually crushes his stuff by running over it with a dozer, or with his mower....... When Andrew is done with something....it is done....so he should have just given it to you.

[@AppliedOCD]

Nice work, Dave! Usually, Camerata 's address is where equipment goes to die, but you rescued this one. Not exactly Applied OCD workmanship, but you reached the goalpost.

[@CerebralAilment]

Good job Dave! That will deff come in handy in your line of work!

[@HamburgerAmy]

aye its cerebral ailment! (homegirl amy..i suggested the school bus trailer)

[@Dumpster_Dave]

O yeah Merry Christmas

[@mtametrocards]

Andrew takes care of this equipment. The washer doesn't work - lol you had me giggling.

[@garyconnelly1984]

As a former pressure washer service tech this was painful to watch and not sure how safe it is with the conversion

[@joeg9920]

Very painful. He's really Micky mousing it.

[@chimerahitman]

True. As a person that fixes electric stuff, seeing him butcher something that could have been fixed, was painful. I know he had his reasons, but it just shows he's a hack.

[@rickhaver5876]

Hindsight being 20/20 I think you would have been better off getting the 200 dollar transformer, but it’s your machine and you can do what makes you happy. Be careful of that power and water in such close proximity.

[@AndrewCamarata]

That should not be burning when water is not flowing.

[@Dumpster_Dave]

I figured that, luckily, I didn’t hurt anything

[@davidhecht4200]

@@Dumpster_Dave Merry xmas you two. Thanks for the holiday content! Wife Shakes head. :)

[@Steven_R_Taylor]

@Dumpster_Dave there will be a flow or pressure switch on the pump that will control the diesel solenoid on the pump. Been fixing pressure washers for 16+ years

[@jonathanfrance8282]

Sid Harvey transformer in stock

[@dylantriller962]

There probably wasn’t anything wrong with your coil. These are designed so the fan runs constantly with the burner switch on but they will only ignite when water is flowing through the coil. I have the same pressure washer and when mine quite heating it was the fuel shutoff solenoid was plugged up. Wouldn’t let fuel through. Clean it out good and it went back to working

[@Popeyes66]

A BIG pat on the back for saving this Beast Dave. I have found another channel now that is worthy of my subscription. Have a prosperous 2024. ( from a Limey in London , Great Britain )

[@Boomhauer333]

Great job Dave. That took some effort to get it fixed but I'm sure you're enjoying it now and have no regrets. Have a Merry Christmas and a Happy New Year!

[@oldodger]

Dirt and sand and mud is machinery WORST enemy. Keeping them clean is the cheapest maintenance you can ever do. The paint , the seals, and all other components love it. Not to mention....They LOOK GREAT.

[@HamburgerAmy]

ungodly easier to work on whenever they do break down too. it's nice working on a clean machine vs having to deal with rusty mud covered bolts and panels, dirt and mud caked into places that just rusted everything into a chunk of garbage... it'll turn a 20 minute task into a 6 hour job

[@pshodean]

I just got one too from the local auction. I hope all is well right out of the gate but Andrew had problems so nothing is for sure till one fires it up. The guys told me to not shut it down hot or the o rings on hose will go (melt) . The said , ok to run hot but when your shutting it down for lunch or end of day, turn off burner and continue to pump water to cool everything off. Mine came with a dozen or so o rings. I'm thinking they are right. My maiden voyage will be soon. I have 2 f350s and one 250 that the lower engines need a bath. Then it's off to the farm for the tractors skidsteer and excavator. it's the only thing to use to cut the grease and oil. I've wanted one for a couple of years too. Enjoy !

[@donaldmacdonald8685]

You and Andrew are a good pair Very good solid men

[@gregsecore9625]

I think I would have tried to buy another coil first before hacking that up to fit a standard one, but let's be fair you did one heck of a job converting that all over to fit a standard blower. Now that you did that I think that is even better because you are not committed to buying them specialty parts for the blower just a standard blower much cheaper to buy them parts, you did one awesome job buddy and if I was you I would be very proud of that converting project. Myself I always dreamed about having one of them, but never bought one because of so much money super love your ingenuity awesome job Dave Mary Christmas to you and your family and keep making these videos buddy I like them a lot

[@cryptomnesiac]

Fixing stuff and restoring them to like new condition is so gratifying. It really grinds my gears when companies make their products increasingly difficult or impossible to fix. Trying to minimize their presence in my life, they don't deserve our money. Hope ur having a great holiday season dude.

[@ywc378]

Never seen you so excited, getting this power washer. With your expertise, it works perfectly now. Wishing you and your family Merry Christmas and a Happy New Year!

[@michaelpolimer2128]

Be careful...........the thermostat may not be rated for 120vac as was a 12v dc application, if the contacts weld you will loose temp control.........as far as the inverter, you have two "loads", blower motor and burner transformer, the transformer must run on some sort if AC but a 12v DC motor could work right off the battery.........there must be some "electronics" in the 12vdc unit to get the necessary waveform for a transformer to work and step up 12v to a higher potential 73 Mike K1FNX near Boston

[@mikeknoll1130]

Yes sir, you can never blame a guy for trying!

[@josh-t4y]

Hey, Dave, all you have to do is get a generator hook it up to the back up it that has wheels on it too. And there you go you got your steam generator that runs The heater

[@SammyFender]

I love the fact that you cleaned a STEAM CLEANER with a spray bottle and a rag!

[@dongalloway6888]

Great video... thanks for sharing... Hoping it will help me with mine... While you had the oil empty... you should have added an extension pipe onto the oil drain plug location that extended out far enough so future oil changes wouldn't require you tilting the unit, and having to do a ton of cleaning on the deck afterwards... I was given an older one a few years ago... got he pressure washer side working... diesel side was next on the list of repairs then I got sick with a couple of cancers... doing good now... It's buried out back under a couple of tarps waiting for me to get back to it... but so are a bunch of other projects... LoL...

[@Islandsaw]

Great job, very satisfying to see it work out. I replaced the igniter on mine and it shot flames like crazy. Put the project away but now I will be digging into the nozzle. Thank you for the inspiration.

[@davidsnyder2000]

Nice job with all the fabricating to get that pressure washer up and going👍🙂

[@keithmatthews1673]

It's like the lamp that the Genie comes out of - you just need to rub it and when he appears out of the smoke you get three wishes 🙂

[@brotherbruce]

You are the first person I have ever seen that has been able to get a steam cleaner working after they quit.

[@larryperdue508]

On the engine were the oil comes out for oil changes put some pieces of plumbing pipe into it and then put a ball valve on so oil changes are easier 😊😊

[@ramblingman8992]

Brings back memories of one of my first jobs as a 16 year old. Steam cl3aning old farm machinery prior to export.

[@danielcocozza151]

i have yet to meet yall, i pass by both of you guys all the time!

[@ronnygraves6380]

Great job diagnosing and fixing

[@seansysig]

Dave the high voltage coil with springs ignites the atomized oil and the safety photo electric sensor keeps the pump going only if it sees an ignited flame.

[@johntilson2535]

Andrew's 'autograph' on the front 3:58 makes it worth the price right there! 😎👍

[@stevebeavers3754]

Merry Christmas to you and your family as well. Research chems fleet washers use... FYI, they spend on average 15-20 minutes per big rig.. Js

[@AlwaysBored123]

Wow what a pain figuring all that out. Nice that you got it working though you can't beat those for cleaning heavy equipment.

[@arjanvogel6444]

Thanks for your vid 😇💟💟💟 Love and bless you Dave, lucky New year.

[@jdboy9]

Use pipe dope instead of tape when working with liquid fuels. Just a good practice to get into.

[@DavidMorgan-iu7zu]

Well done Dave, perserverance pays off!!

[@spencerrobinson2719]

Always satisfying to fix something up on the cheap!

[@carloskawasaki656]

Thank you for sharing, awesome job, I learn a lot 👍👍👍👍

[@SpencerRyllSmith]

"Andrew takes good care of all of his equipment" 😂😂😂

[@ProtonOne11]

Interesting, you run mains powered equipment outdoors and in the water without any grounding wire and without connectors rated for wet conditions? Seems pretty sketchy to me... But glad you got the new burner working good enough that it's not just a smoke-machine.

[@exmark5248]

Nice job Dave. Merry Christmas 🌲🌲🌲

[@brentkingnwagent1347]

Great video and great job Dave. Thanks for sharing and have a Merry Christmas.

[@Jeremy-de2of]

I was always told never have the burner going without water flowing could burn the hose up n the burner n turn the water to steam n bust the lines going to the wand

[@31sweetcorn]

You need to put a flashlight on the eye then check for spark on the coil.

[@art1muz13]

Have a Merry Christmas and a Happy New Year! Great job, Dave,

[@HamburgerAmy]

dang! dumpster dave coming in clutch with the supa bowl save.

[@JerseyTom]

that reverse funnel is a nice trick! i'm gonna remember that

[@SparkysGarage]

Great vid Dave! Nice fix

[@Nick-nw6zg]

Great idea with the ladder , Mike🤘🏼‼️

[@PopEyed]

Enjoyed this video, thanks Dave! Merry Christmas and a Very Happy New Year to you and your family. :-)

[@Rubbernecker]

Well done!!

[@robbieeades1956]

Heck yeah i hear you Dave.. im glad you got it working. Took a little engineering to do it but i knew you weren't going to let it whoop you. I hope it last you awhile for sure. Merry Christmas to you and your family Dave.

[@McNeillWelding]

Nice job Dave congrats on your purchase. Merry Christmas.

[@konradweniger3141]

I always used Tide in a bucket on the suction side and was trucks and farm equipment,if tide takes oil and grease out jeans it takes off equipment.

[@anibch1]

Why don't you replace the small diesel-powered engine with an electrical pump capable of producing the same psi? Since your heater is also running on AC power replacing the diesel engine will reduce the noise level provided you use this with grid power.

[@richardstockwell9637]

nice unit I have the same one and have had most of the issues with it that Andrew has had make sure you use a good water supply hose at least 5/8 ID

[@Dumpster_Dave]

Yea

[@piotrciach1126]

Witam. Jedna podpowiedz by dobrze działał silnik od nadmuchu grzałki, inwerter musi mieć na wyjściu nie tylko odpowiednią moc, ale to co najważniejsze musi na wyjściu być prawdziwy sinus . Tania przetwornica zazwyczaj ma ten sinus o przebiegu prostokątnym a silniki tego nie lubią. Dla tego przy starcie było słychać takie stuki, trzaski. This inverter has Modified sine wave, You need sine wave for electric engines. :)

[@donnal.oglesby4806]

Dave, you did a great job in repairing this hot burner pressure washer, and getting it form Andrew was a smart buy as well, cause as you stated, he takes care of his stuff. Hap[py that with a bit of work, and replacing parts that it is working well for you now. Merry Christmas to you and your family.

[@annechristiansen941]

Thank you very much for the video. 👍🤗👍🇸🇯

[@timothyabraham2228]

Merry🎄Christmas dave and to ur family !

[@jfitz9624]

I had this same unit. Very powerful at 4000 psi and 4gpm. My hot side went out as well. I figured it was the igniter. They sell that igniter for $180. I was going to fix it but ended up finding a good deal on a really nice used northstar unit. Figured I’d have better luck long term with the northstar. Seems like all the problems with these EK units is in the hot side so hopefully with your modifications it’ll be problem free long term. Btw, the pump takes ISO68. Not the typical 30wt non detergent.

[@operatormuda-lu1hf]

Amazing brother 👍🙏

[@jimharden4823]

Merry Christmas DD and AC

[@In2investing]

I just bought an Alkota hot pressure washer from auction. After fixing about 3 minor things the thing works beautifully. One of them was that the burner on mine wouldn't fire unless the pressure sensor senses the correct pressure/flow when the trigger is depressed to prevent over hearing everything. I priced the unit out and couldn't believe what they sell for new. They're in the 5 digit range now unreal. Edit also you want to run water through the unit without the burner on, for a minute or two to cool everything especially the coil down after use. It will significantly increase the coil life.

[@Dumpster_Dave]

Thanks for info

[@SmittysShop]

Nice job dude!!! Enjoy that machine! Happy New Year to ya!

[@thedelcodave]

When you first fired it up inside I thought... "this might be an outside kinda project"

[@jacobbuckley8232]

Not sure if he takes care of his equipment. Might service them regularly but beats the shit out of them

[@kylejones2075]

Nice thanks for sharing Merry Christmas 🎄🎄🦃😅😅😅

[@Tbobelak]

That 120 volt unit is not designed to be used around water. It is for an oil furnace Careful, you don't kill yourself. Run a ground and ground fault

[@DirtRoadLanding]

Hey, Dumpster Dave, question for you. Is there some kind of latch that secures the dumpster onto the trucks rails to prevent the dumpster from tipping over while being transported?

[@kirk467]

Probably needs a new igniter Dave! If it’s not lighting up! It should have a thermostat to regulate the temperature!

[@RobTuck1475]

Merry Christmas Dave and family!!

[@pedrohoracioaguilardiaz3288]

Merry Christmas Dave and Andrew!

[@dabogeyman6280]

13:06 i can feel your pain Dave, sausage fingers like mine are not built for certain jobs 😂

[@ericdrob4497]

I have power washer like that and I believe you need 12 V battery in order to start the heater every time my battery goes dead the heater won’t run so I think If you install new or charged battery the heater will fire up for you. Good luck

[@criticalevent]

I've still got a Beckett furnace burner I've been hanging on to for 10 years with the intention of making one of these but I'll probably never get around to it :)

[@Farmall450]

Merry Christmas DD!

[@niccom1385]

“That may have been a outside project”😂

[@garycadieux9649]

MERRY CHRISTMAS

[@CITYNEWSSUPPORT]

Nice work Dave and Merry Christmas! I always thought solid wheels would be better on that thing.

[@william6526]

Without water running through the coils you can ruin that burner running it dry. For how much these steam cleaners cost you would of been better off buying the right parts to fix this cleaner right. It doesn't put out much steam.

[@kirk467]

Good job on grease! Ever start, that’s the reason it doesn’t work, those batteries from Walmart suck! Junk, Andrew should know that, he says it all the time! lol 😂

[@criticalevent]

Andrew's new one looks like it was for servicing the Space Shuttle.

[@Dumpster_Dave]

lol that thing is top notch

[@landscapeone2957]

You should of just bought the $200 set up to begin with. I would of. Thumbs up....

[@Dumpster_Dave]

I’m going to fix that other burner, I want to make a portable washing unit

[@danielruta8769]

Dumpster Dave And Andrew Double Threat Or Treat. Merry Christmas too Both and Their Famalies From Canada

[@rogerthetinker5116]

You need a pure sine wave inverter for the motor for the burner to work. Not a modified sine wave inverter.

[@YAROSLAV-RU]

Дэйв, ты сделал замечательный подарок себе на Рождество. Хорошее приобретение, отличная работа. С Рождеством тебя, и твоих близких. 🤓🤘(рок-н-ролл)

[@Cobalt135]

16:31 if it gives you fuel flow issues or clogs up in the future it could be what looks like a little PTFE tape that was still hanging on to the threads inside that threaded port.

[@DeividasGas]

Dave, do you record yout videos with gopros? and if you do with witch one? your footage seems okay, but im suggesting trying 4k, especially when most of the actions cams nowdays record 4k it seem like a waste of storage if you are recording 4k but uploading only 1080p.

[@Dumpster_Dave]

I film with a GoPro 11. I film in 5k, when I upload to KZbin I do 4k. 1080 is the max on KZbin

[@DeividasGas]

@@Dumpster_Dave i suggest you record on 4k and that is usually what KZbin limits at and not many people have 5k resolution monitors or tv's anyway, but when you render the video footage you edited select 4k HD output, because you're downgrading your footage a lot by rendering and uploading only 1080p.

[@davidcooke8825]

Some alloy wheels and that thing’s bomb

[@AdelinoGambiarras]

That worth the treat on Christmas nice one buddy 👍 👍. Marry Christmas Dave and to your family 🤶🎄 Marry Christmas everyone 🎄 🎄

[@AlexeiTetenov]

Thanks for sharing!

[@roberta4989]

Was kind of like two monkeys and a football for a little while but..... Dave you were determined! Good on you!

[@Dumpster_Dave]

Lol

[@ohhpaul7364]

If you ever need a new pump on it, I hear that CAT pumps are great.

[@1GuyGamingCo]

These burners are typically wired in to a pressure switch so the blower runs but won’t add fuel or ignite unless your actually using the pressure washer under load

[@dylantriller962]

I have this same pressure washer and that’s exactly how it is set up. Probably wasn’t anything wrong with his coil

[@kirk467]

Just a little bit of help, please? lol 😂

[@sams7655]

You need to get a vacuum evacuator tank for draining liquids like oil, gear oil and anything really. Makes maintenances so much faster.

[@Dumpster_Dave]

I definitely do

[@sams7655]

@@Dumpster_Dave hey I was wondering about that inverter. If the engine was running and charging the battery, would that make enough power then?

[@Dumpster_Dave]

It Has to go through the inverter because you’re going from 110 AC to 12 V DC

[@sams7655]

@@Dumpster_Dave I know, I have one in my truck. I'm wonder if that engine charges that battery very well. My inverter works best when the engine is running and charging the batteries. Last winter my inverter wouldn't run my coffee pot unless the truck was running. Later I found out i had 2 bad batteries. Those inverters seem to work best when there's more amps running to them. Just curious though.

[@flir67man84]

Those engines at best put out 2amps at best..you need like 50amps for that inverter

[@wantsanewvehicle]

The company I work for has one of these to clean the company vehicles. They won't let anybody use it though :(

[@john1gilboa]

I think a better repair would of been to get 12v burner going really wouldn’t of been that hard

[@Aaron-cz5tz]

Lol