Fixing One Huge Screw Up

www.letsdig18.... for shirts and more

[@kenolswfski8862]

I was an operator for 28 years and it's a joy to watch a true operator in the machine, like we always say,everyone can run a machine but not many can operate one

[@glenjones6980]

I keep getting visions of Post 10 emerging from the pipe with a full run down on the original wrong installation

[@sharonolsen6579]

lol .. was thinking .. post10 would have a lot to say about this !!

[@KaiHenningsen]

@@sharonolsen6579 Not enough spiders.

[@lucassanchez5560]

While watching some of these videos i sometimes see how post 10 would emerge from the woods and do the full run down of the bad installation of these culvert pipes. Lolz!!

[@Kurgosh1]

When I was a kid, the playground at my elementary school had a bunch of these concrete pipes painted bright colors that we could climb on and hide in. We called them "tunnels." They all had the holes in the top, just like these. After all these decades, I just learned today what those holes are for. Neat.

[@Ouwkackemann]

That are overflow holes. Just kidding. :)

[@ReverseProof]

I hope that crew doesn't lay roof shingles on the side.

[@davidmorse8432]

They start at the ridge and work down to the eave. 😁

[@AffordBindEquipment]

totally LOL!

[@imaramblins]

That's exactly right. They'd lay em on the side, not the roof...

[@tomrogers9467]

Gotta watch when they lay sod, too. Keep yelling “green side up”.

[@petergamache5368]

Buy a roof, get a free indoor swimming pool.

[@Thermalions]

The finesse Chris has with the excavator is mesmerising.

[@LLImprovement]

People talk about how good of an operator he is, but the patience he has to keep changing the camera angle and he always has things to say.

[@seting9159]

Your finesse with that large machine is wonderful to watch, you're truly a very skilled operator.

[@shaneharrison9609]

It’s amazing to me that someone could screw up a simple pipe run like that. So strait forward, I hope they were able to comeback on whoever installed it.

[@DK-lc8gf]

I love this guy, cool, calm, and very talented.

[@xRepoUKx]

Yup, makes it all look easy and I suspect it's harder than it looks.

[@gobshite5150]

Dude I know nothing of digging, I am not interested in digging but this guy is so fricking relaxing to watch dig haha! I watched a video yesterday of him digging out a digger and that was about the most relaxing thing not to mention interesting as hell - I couldn't stop watching until the job was done... =D Well done.

[@kevinkenyon7045]

Chris your operating skills are amazing, John doesn’t miss a beat, I was waiting for him to grab the bar and straighten it out over his knee. Thanks for sharing. Kevin

[@Kiddo311]

Eff it: If I win the lottery I'm buying a piece of land and an escavator. They look like so much fun.

[@hikerJohn]

@Viktor Sligo I used a smaller one of these. It's dizzying

[@vFLAWLEZZ]

@@hikerJohn smaller ones are harder to use apparently, I see they arent as stable to use

[@jesseparris6507]

Not 'if', 'WHEN' you win the lottery. Think positive, brother, you never know.

[@photoguybrian]

It is.

[@tomrogers9467]

@@vFLAWLEZZ You’re correct. The small ones like to jump and buck; hard not to jerk the sticks when that happens. Big heavies are much more stable.

[@caglecagle4979]

They put the pond on the wrong end of the pipe

[@grannygear1001]

You mean they put the pipe on the wrong end of the pond, 😆

[@ChrisCiber]

@@grannygear1001 I am certain that is meant what he said and he said what he meant.

[@Tang0Fox1]

Hahaha

[@tomrogers9467]

@@ChrisCiber “An Elephant’s faithful one hundred percent”. Ok boys, free beer tomorrow for the first to know where this quote came from!

[@smeatwich]

@@tomrogers9467 Horton meant what he said!

[@theramblingrobertson62]

This is the best channel I've found in Fekkin AGES!!! LOVE IT!!!

[@raykemry954]

So soothing to watch some one use there machine instead of tearing it up. You have the eye for what you are doing. I am retired and disabled now and dad is dead and gone . I remember so fondly working with him and our heavy equipment biz we had for 35 years together. Your videos actually lower my blood pressure. I lived for the adrenaline every day we worked in our hard rock shale pit we drilled and blasted about 5k a year. Use to build lots of driveways out in the mountains to people's home sites and private logging roads to remove the timber. We had a D8 loaders .truck and transfer ,road grader roller and a 40 acre shale pita few sized excavators and a couple hoes clear down to the b20 backhoe I put 9 thousand hours in the seat on the b20 alone. We had a 4 bay shop wit 3 drive through bays. Actually use to rebuild stuff in the slow times the fourth bay was a full machine shop. Had several other old guys that just sat around the shop every day to work on there retirement projects they all shaped in and helped every time they could . Sure learned alot from them guys .

[@kilo1934]

And this is why you will never run out of work. Keep it up. Thx for the vid

[@mfeldheim]

When a man talks to the objects he is working with, you know there is passion involved 👍🏼

[@petemoore5104]

I resemble that remark. I named all my hand tools. I used to own a Triumph Student lathe called Grant. Student Grant. Then there was Cheery - it was always drill-pressed.

[@cs_fl5048]

I enjoy watching this so much. You don't know how much I wish I had the skill to do this. I can cut and suture people fine, with 46 years of medical practice.... but I truly envy you your skill. .I love to watch your hands and fingers work. Artistry.

[@jameshoppersr.-beaver-retr215]

I started with a company laying drain pipe right out of high school in 1976. My job was to go through the pipes as they were laid and wipe each joint with tar so what happened here would not happen. After 10 years I became a machine operator just like you are now. I'm 60 years old and I love running a Track-hoe best job ever.

[@danielhowiesr.2593]

Thanks, Chris. I find your videos very relaxing! Keep up the good work.

[@jordough4495]

Came for the algorithm, stayed for the digging. Great stuff!

[@timgiven3826]

That digging bar has a real nice bow in it. Cant wait to see the next episode

[@LordZoth6292]

The transformation of that rod throughout the video was amazing

[@keithsawyer6356]

I reckon he run over it with the Cat.

[@camus6208]

Amazing the soft touch you have with your big machines.

[@jimyeats]

He got his wife pregnant with an excavator.

[@andrewh5988]

I love your job, great operator, I spent 35yrs on heavy equipment. I operated excavator a few years but looking at you operate and being retired, I enjoy watching you operate. My only machine left that I play with is a skidsteer.

[@codyg7936]

You could just transport the inlet/outlet to the opposite side, the rest of the sections just flip 180degrees

[@sharon9917]

That is some exacting work separating those pipes!

[@marycasadone6865]

I stumbled across your videos one day. I live in the Mid-Hudson Valley in New York state. I'm a cosmetologist so I have never done any construction. But as a perfectionist I can really appreciate your accuracy & skills. I was quite the tom boy growing up & have a fascination with how things are made & built. I used to love Bringing my sons to watch excavating jobs. I think I was more interested than they were. Thanks for the videos. I enjoy them immensely.

[@fayjohnson2652]

You impress me. Your so gentle. Very good at your work. I'm binge watching you. THANKYOU for the videos.

[@deathk26]

One has to wonder if they even realized they screwed up, or when they did it was "too late" to fix it.

[@actuallowroller]

You demonstrate the true meaning of a smooth operator. Awesome video, must've missed this one when it originally came out.

[@Whitewolf4869]

Why would you carry them to the other end? You make the original installers look like geniuses. 🤣

[@pacremodel9745]

I was taught that the male end always points in the direction of flow.

[@____________________________.x]

these days the Left don't like you assuming the gender of a pipe...

[@oelschlegel]

except for a few days each month

[@davidmorse8432]

That is a good analogy. If a fella forgets he can just take a pee to help him remember.

[@larryweaver5667]

Pac Remodel, that does make sense. It's what my dad told me when laying a drain field.

[@tivvy9708]

That's what she said.

[@plepgeat]

MAN, you have a delicate touch! You could pretty near change a diaper with that 220...

[@jonathane9403]

When you were using those bucket teeth to gently push the pipe apart reminds me of how elephants use the very sensitive end part of their trunks to gently manipulate very tiny objects. Very skilful. Thanks for the video.

[@InservioLetum]

"I got a lil carried away diggin" I relate to this sooo strongly, I almost wish I was there doing this. I am lying in bed, however, which is dreadfully comfy...

[@toast47624]

So why do I operate the same excavator all day then come home and watch someone else do it? Sitting here giving Chris my thoughts as if he can hear me. Lol. Nice work mate! I like the the 220 as well. Very smooth and precise machine when lifting.

[@johncamp7679]

Safe !! I just started watching your videos last night, it was the one where the rental was buried in pond. A cubic yard of dirt can weigh over 3000 pounds. If you don’t know about soil safety, please don’t rent one of these and get yourself or your helper seriously injured from a trench collapse. He’s digging in class C soil, it’s been previously disturbed. You need competent person training before ever using any kind of excavator, or digging with a shovel if more than 4 feet deep.

[@vFLAWLEZZ]

I came from the same video, fun to watch people using these machines so efficiently. I only have access to a small digger some work takes a long time 😂

[@EndlessSurprisesSD]

Same place I came from. I'm looking for another one dug out. That was just fascinating.

[@darrelmartin5635]

Up in alberta here my 48" pipe weigh 3.67 tons and are required lifting clutches, same with flared end. Work at a pipe plant we carry all the way up to 120"

[@georgesherman5345]

You handle that pipe like a new mom handles a little baby. You are one heck of an operator.

[@AndecIunson]

I just love how youtube subtitles the sounds of the machine as music. :) spot on!

[@AdamCasada]

31:58... balls of steel. I almost died, just watching

[@davidcooke8825]

Never appreciated how huge the bucket is on that 220 until I saw Chris standing next to it.

[@johnhampson7]

I was beginning to worry a little about how much that bar was bending. A really interesting video.

[@dignation216]

My company has a set of those mats , they’re amazing, I doubt they’ll hold the 220 up but you’re mini is gonna float on the mud on those 👍

[@mischef18]

Excellent video bro. Makes ya wonder how some people can gat away with it but on the plus side you get money in your pocket for fixing their screw up.

[@karlwalton7687]

Haha love it .... limits of disturbance to a minimum. ..... that needs to go on a shirt Keep up the great videos

[@CrustyAbsconder]

I have watched about twenty of your videos this past month in my pajamas in my comfy lounge-chair on my fancy widescreen Android phone. I am 57 year old male unemployed with poor health and few job skills I often have no earthly idea what you are doing, It is like watching a gymnast on the uneven-bars. It would be nice if you would tell more about the details of everything I plan to go back and watch more of your videos and other KZbinrs about machinery. I live in an inner-city ghetto apartment, so there are no "ponds" around here, unless that is a slang code-word for bongs or brothels.

[@markmortensen4341]

Great video (even with all the math) that I didn't even think about with the bins and how much was in there. Now that you got our curiosity up, don't forget to tell us what all the fire department was doing!! Take care and thanks for sharing!!

[@lesflynn4455]

It's handy how people screw up jobs like this, it gives you more work. This looks like a fun little job.

[@ohiomoto]

Why not...swap out the first bell, remove one section of pipe the create some room. Then dig the next section, spin it, and set it in place. No need to remove multiple sections or re-grade the bottom.

[@slngblde]

You could do a series on fixing screwups.. “ cluster f**ks with Chris”

[@MrShanghai34]

He would always have job security

[@Skorpychan]

That's half of his channel anyway, isn't it?

[@nashvillecop1]

Where is this business located?

[@kennethstaszak9990]

@@nashvillecop1 North Carolina

[@JamesSmith-ot7gi]

I want to see that Channel come to life!!!! LOL

[@johnlear3634]

You are a great operator of all equipment and a great person. Keep up the good work and don’t change

[@Paultimate7]

You know him personally?

[@CJLeTeff]

That rock bar sure is earning its money tens times over! 😂👍👍 Those things will bend and flex like crazy! Straightened mine out plenty of times and never broke it.

[@williamganske944]

I enjoy watching your channel you are amazing with your machinery on the things you can do with them keep up the videos

[@keithnoneya]

Thumbs up! Why did you move all the pipes? I if they were in backwards, just pick them up and rotate them 180 and put them back down on the same bed, and then you only have to move the end pieces. Glad that guy on the low slope trusts that chain not to give you he'd be a Pizza. Still another nice job, though. Thanks for sharing. Best Wishes & Blessings. Keith Noneya

[@tedwpx123]

👍wow, will the original contractors have to pay for the rework

[@george8873]

Thought you were going over into the hole when you started lifting the flair on the upstream end of the culvert with the way you were teetering there for a second @ 32:00. Also, my first thought when you went into the culvert to slide the bar in to lift the pipe was... "Well, must be no snakes in there. Chris didn't run out of the culvert like he was shot out of a cannon." Lol.

[@bearpump]

Lol. All I could think of was snakes, too!

[@marksullivan2333]

We misseda fair bit of North Carolina cursing during the root canals. Nice work Mr.

[@murrayandru7527]

Every job goes much better when someone who's got the skills is in at the Helm , well done Chris !

[@ko9446]

On the bright side you now have a digging bar to work around corners

[@damiensampson7323]

Uncle John is a thorn in your side. I love the way he relays to you (HEY HEY). Ever think about going out on your own.

[@Mephiston]

He does do some work on his own. The machine with the LD18 branded bucket and thumb is his own personal machine, and if he's doing a job with that its more'n likely its not for his uncle. That animal hospital clearing lot in Raleigh was a good example of that (the one that had stone everywhere and needed blasting), as well as pretty much every dam repair except the one that overflowed and they had to do it twice.

[@greghoffstadt667]

Watching you swing all that weight around with such a delicate touch is why I call you a " smooth operator." Great work! Catch you on the next video.

[@readbird]

It is so cool to see you work. I really liked this episode where you and your uncle? went down to the pipes so we could really see the dimensions. We have been sitting behind you in your cab, so it is easy to forget the size of things. So if you can, it would be much appreciated if you do what you did here and show your size compared to what you are doing. I mean, some of the trees you are taking down are massive! Anyways, thanks from Norway!

[@tactileslut]

Armchair commenter with fond Tonka memories: Would it have been possible to lift and spin each segment, after making some room?

[@ntepup77]

That's what I thought too 🤷

[@ntepup77]

After watching they had to dig it down and ect. So they had to be out of the way.

[@SuperAWaC]

no

[@tonyincs]

my thumbs up is for the "Tonka memories"! I think that same thought every time I watch one of these.. Things I did with my toys and imagination. The good old days ;)

[@jamesogorman3287]

I love your description of yourself. 😀

[@Chris_In_Texas]

Love as time goes on the breaker bar keeps getting more and more bent! 👍😲

[@HappilyHomicidalHooligan]

What he isn't telling us is he's using this project to make a gift for his wife for Valentine's Day 2021 - a steel heart...

[@photoguybrian]

Enjoy watching. My father in law owned a backhoe / grading company and was known in these parts as the best operator around. I miss that dude. RIP Papa Joe Lee Ledbetter. Travelers Rest, SC.

[@meppssr7123]

If you can make me watch what I do for a living on my days off, you're nice!!. 😂👏🏾

[@kens.3729]

If you had a Nickel for Every Project you stepped in to Correct, you would be Retired already. 😬👍

[@michaelmullins1290]

Excellent use of the second camera. Both sides of the work. Possibly, both sides of the pucker factor one day. Awesome work.

[@KSparks80]

A friend had the same problem after he replaced a couple of down spouts on his house lol. Doh!

[@davidbrickey7328]

People never cease to amaze me who in the world would put a bell pipe backward. They should’ve asked some questions where they picked the pipe up

[@michaelhill8197]

There goes that surgeon with this diesel scalpel again! Kind of like a health exam.

[@flashfire3220]

Hopefully it is not a prostate exam, boy would that hurt.

[@keithdunlap2701]

Easy !! easy..... She's a little heavy There Son !! lololol.....That's one of those "Here's ya Sign", moments to who ever put those in backwards....lolol... You guys will have that licked in no time , looking Great so far Chris ! Have a Great Evening an Weekend Man !! I would say, "On to the Next" But, I believe you'll be back with part #2 on this one....lolol....Have a Good One...

[@CrazyPetez]

Great video! I really like the alternate views where you set the camera on a tripod, and we can watch you out moving around, like when you put the bar through the chain. All good.

[@sweetsketch3]

Kind of nice and relaxing, without having to dig in the city, around unmarked utilities, and unexpected surprises, trying to spot ditch lines, after everything is supposedly marked.

[@p-dfishing]

"Yes, the pipe goes this way. Trust me I'm a professional"

[@Misha-dr9rh]

"The dirt will hold it in place" they said. "It'll be fine" they said.

[@genedameier8746]

New title: "The excavator gets a new set of Dentures"

[@had2galsinthebooth]

darn near bent the old pry bar into a giant fencing staple shape, lol. Oh well, cut it up into 2 shorter bars and buy a new long one.

[@tomrogers9467]

With those new teeth on, Cris can now open his beers from the cab! And I bet he could, too!

[@EndlessSurprisesSD]

Have you ever seen the contests? I randomly found one a few months ago, and they were stacking martini glasses. 😵

[@stephenuk6490]

I understand why the flares had to be swapped but why couldn't the sections be lifted and spun 180 (after moving one out of the way so there's room to work) ?

[@truckertrash1245]

I miss running heavy equipment. I was NEVER this good at it.

[@garymoore8711]

I was terrible at it. Bellydumps and scrapers scared the hell out of me! When they offered to let me pull cable for a 25 yard bucket shovel I jumped at the chance.

[@bigraisins2116]

This was literally done the hardest way possible. Take the ends off and swap them, cheating the first end laid a foot. Lift, spin, lay done.

[@ajb53]

I thought the same thing. There must be some reason.. Make sure the grade was good? Would hate to get half way done and have a hump in the grade..

[@drewgoody2957]

Its amazing how some people can mess crap up so much ...... some security for you right lol ..... great video you do amazing work ....

[@nealgramento6975]

I would have swapped the ends around removed one pipe and reset as you dug them out. Would have been quicker. But that's just me . I guess 30 years doing it pays off.

[@OakesProject]

The crunching noises you hear when he was swinging the flair up the hill was just Chris putting a few new wrinkles in the Ol 220's seat.

[@bigbird9794]

Can't believe they didn't grout from the inside to solve the problem. Non shrink would have done the trick it seems, but I've been wrong before. 🤣🤣

[@rbdworks4342]

This maybe a stupid question, but why would you just spin the pipe 180 after pulling the flares? Or just remove one then spin them?

[@MrKennyaa]

i used to work at a precast yard. the biggest pipe we ever made was a 12 ft. diameter inside. the down tubes for a dam.

[@jasonudall8614]

Anyone tell me why he swaps sections end for end ....rather than rotate each piece "in place"?

[@jcgoogle1808]

Saw your comment after I asked the same thing.

[@AnAmericanDodo]

Wow, moving that end piece like that was pretty damn impressive. Has anyone ever accused you of being really good at working that machine?

[@CGCampbellJr]

Deft Touch.

[@maxitout77]

You definitely need another "Tim" 🤣

[@martin_mue]

The clone is not ready yet. Volvo only makes 95 units per year.

[@leeharris3061]

South park has timmy 😁

[@xXBuckOFiveXx]

@@leeharris3061 TIMMY!!👨‍🦽

[@bearpump]

I keep volunteering, Fat Boy Jeffy!

[@makingithappen5178]

@@martin_mue The only fault with Volvo's clones, is that they only understand Swedish.

[@railroad9000]

That definitely is a description for a monumental screw up! Install pipe backwards! WOW! Just wow!

[@apga1998]

I am having trouble understanding this. Either you connect the pipes properly or not. What difference does it make which direction they are laid? It seems the problem is connection, not direction. How would they miss this mistake on the original install? Thanks.

[@austinshackles549]

that bar is gettin' a funny shape...

[@williamfindspeople4341]

Omg put the system in backwards 😳 someone definitely didn't know what they were doing, but I bet they got their money lol

[@IR-nq4qv]

😳 someone definitely didn't know what they were doing... Neither did the owner so the job was a complete success until everything went to shi# . That's the difference with Chris, he can size up a job from 60 feet away and tell you that you will have issues. The sign on this job is as old as the times" You pay for what you get" or visa versa. This is why Chris isn't afraid to film his work. The man is a true professional who takes pride in his work.

[@ConstructionMachineryChannel]

Must be embaressing to the guy/company that did that. I wonder if they have any idea who did that.

[@deadslow201]

How about using some seam sealer for those seams?

[@davidcolesr.8628]

@@deadslow201 He Was Using Joint Sealer, The Rolls Come in the White Box With The White Plastic He Peeled Off On The Ground Where He Staged The RCP After Removal

[@makingithappen5178]

I also do not know how to lay cement pipes. But wait. I'm not working with laying pipes.

[@alskinner2007]

I enjoyed watching your videos. Your explanation as you do the work is very informative.

[@samson9428]

If I have the use the grass I took up for dressing something back, I prefer to do it with a bulldozer. You can put it in thick and shake the blade while you push, then track it all down and back drag real gently and it works out okay. Then again I may be biased because I run a bulldozer more than anything else so of course I can do the best job in it lol love these videos though!

[@craigwavra3495]

Cool video. Enjoy these where you get to use all the tools. Can’t wait to see the next video.

[@taylorsellers1029]

And not bedding or covering the pipe with any kinda rock or pipe bedding, is just asking for settlement and backfall issues down the road. And in Iowa we tie the flare into the last 3 pipe of the run with tie bar on each side of the pipe along with a Frost footing at the mouth of the flare to insure that flare and pipe stay locked together and no erosion happens!

[@TheBobbyB86]

That poor pry bar, it never stood a chance.

[@07decker]

best operator I have seen. I have a Hitatchi ZX50 and watching you, helps me learn what I can do. Thanks for the videos I still don't understand which way the water is supposed to flow. From the now empty pond and into the pipe? Or is the pipe filling the pond? Which way are these culverts supposed to be? How could someone not know before laying them in?