Level Up Your 3D Prints with Hidden Magnets! | How To 3D Print Magnets In Your Designs

  Рет қаралды 190,362

DraftID

DraftID

Күн бұрын

Пікірлер
@cadbuildflyrc3784
@cadbuildflyrc3784 10 ай бұрын
A few years ago, I never heard of 3D printing, now can not live without it lol.
@DraftID
@DraftID 10 ай бұрын
It's come along so much. Being able to design your own things and print them out is living in the future!
@Andreas.Pfisterer
@Andreas.Pfisterer 8 ай бұрын
I know what you mean. I got the Printer fever too 😀
@MartinSchabbauer
@MartinSchabbauer 2 ай бұрын
@@Andreas.Pfisterer+1
@ModernRemade
@ModernRemade 9 ай бұрын
This is super helpful! Really enjoyed the pacing and detail of your tutorial. Can’t wait to try it out
@DraftID
@DraftID 9 ай бұрын
Thank you! I'm always looking to improve so I hope the next one is even better :)
@edz44
@edz44 10 ай бұрын
Switching the X1C's default hardened steel nozzle to a stainless nozzle will also prevent the nozzle picking up the magnets - useful for stronger magnets where friction alone may not hold them in, and for filaments where glue may not bond well or at all. The P1 series come with the stainless nozzles by default.
@DraftID
@DraftID 10 ай бұрын
Mate that is excellent advice thank you! So obvious now I think about it. Limit’s some abrasive materials but like you said, might be required in some cases.
@KiR_3d
@KiR_3d 10 ай бұрын
I think that you can print without covering the holes at all. Using some little work with epoxy or wood primer can help. As a guarantee that a magnet will not break epoxy over time here is an option: make pokets from sides and insert magnets there. Once it's done (and everything checked) you can even cover these places with plastic using a "3d pen" with the same filament.
@morgenkaffe
@morgenkaffe 8 ай бұрын
@@DraftID why would anyone even use the normal nozzles? There is no big difference in the pricebetween the normal and the hardened. Great that you got a solution mate. Happy printing :)
@DraftID
@DraftID 8 ай бұрын
@@morgenkaffe was probably just an excuse for bambu to configure the lower p1p/p1s model while also making a buck knowing people with those printers will likely upgrade to the hardened steel. I agree though, just go hardened cause you dont loose anything.
@YarNotsew
@YarNotsew 3 ай бұрын
@@DraftID Wait. This is confusing. @edz44 said that switching from hardened to stainless would reduce the risk of picking up the magnets. Then you said just go hardened cause you don't lose anything. I've been embedding magnets in game pieces using an Ender 3 Pro with a brass nozzle for quite a while now with no problems. I've been eying the A1 Combo and wondered about how it would do with embedded magnets. Won't magnets be attracted to hardened steel and NOT to stainless? Is the "normal" nozzle stainless?
10 ай бұрын
In PrusaSlicer you can also add negative volumes for the magnets. Useful for things like D&D minis and decorative fridge magnets when you don't want to mess around with the model in a CAD program or Blender. (If you're printing something with generated supports, you should also duplicate that negative volume, expand it on the Z axis by 2-3 layer height's worth, and turn the copy into a support blocker. Otherwise the program might generate supports in the hole.) I usually don't fret around too much about tolerances, as a rule of thumb the diameter of the cylinder for the hole is magnet diameter + nozzle diameter (+ 2 × XY compensation if you're using any), the height is magnet height + 1 × layer height. The layer above the magnet is going to be filled using bridge flow anyway; it's going to sag a little so that will cover the extra space on the Z axis, and the extra material from the bridge flow ratio will ensure that it sticks in place on the XY even if the hole is slightly too big for it.
@DraftID
@DraftID 10 ай бұрын
Really detailed info, thanks for sharing!
@Dr_Kenneth_Noisewater
@Dr_Kenneth_Noisewater 10 ай бұрын
Bambu Studio can do negative volumes as well.
@darrennew8211
@darrennew8211 10 ай бұрын
Glue a magnet to a stick (like a chopstick). Glue a magnet facing the other way to a different stick. Color-code the sticks. Now you will never insert a magnet the wrong way around, as you can pick up the magnets with the correct polarity.
@DraftID
@DraftID 10 ай бұрын
Creative tip, thanks for sharing
@brianguichet4047
@brianguichet4047 9 ай бұрын
Brillant
@NikOutchcunis
@NikOutchcunis 8 ай бұрын
What type of glue are you using?
@darrennew8211
@darrennew8211 8 ай бұрын
@@NikOutchcunis I don't remember if it was superglue or hot glue. I even printed a little 3d sock with one end for a chopstick and the other end for a small magnet.
@DraftID
@DraftID 8 ай бұрын
@@NikOutchcunis I just use any super glue (CA glue). I find the better brands will last better when you put the cap back on while cheaper options will probably just dry up after the first use.
@IbnBahtuta
@IbnBahtuta 8 ай бұрын
Nice presentation, zero clutter, zero padding. Thanks for the upload.
@DraftID
@DraftID 8 ай бұрын
Thank you!
@kayvonpejooh3479
@kayvonpejooh3479 10 ай бұрын
When it come to the pause, to make inserting the magnets easier, you can clear the pause dialogue box in the slicer and then lower the print table using the controls to give you more space from the top. When you hit resume the table comes back up and prints as it should.
@DraftID
@DraftID 10 ай бұрын
Excellent tip thank you! Surprised I missed that.
@willofthemaker
@willofthemaker 10 ай бұрын
Nice video. If batching out, would make sense to do a plate full of lids and then a plate full of containers. That way the pause time is there for multiple ones at once. Do like the idea of using one to set the magnets. Efficient and quality control in one go!
@DraftID
@DraftID 10 ай бұрын
I agree, do a bunch of lids and then do a bunch of bases. Glad you enjoyed it.
@MartinSchabbauer
@MartinSchabbauer 2 ай бұрын
Thank you, thank you thank you. This is an excellent explanation. I really needed it. I love your tone and your ambition to explain this in such a fantastic way.
@DraftID
@DraftID 2 ай бұрын
Thank you for the kind comments. I hope to produce more content like this once I settle into the new studio space next few weeks :)
@MartinSchabbauer
@MartinSchabbauer 2 ай бұрын
@@DraftID New Studio - all the best.
@Freytana
@Freytana 10 ай бұрын
This is the shortest and most effective video I have watched on this subject, you really covered a lot of material in an efficient and clear way. Thank you for taking the time to share your experience. Have a wonderful day!
@DraftID
@DraftID 10 ай бұрын
Thank you so much! I get a few haters come in with comments saying the point of the video is obvious but I just want to make content that shares my process on working through things while at the same times sharing what I already know. Im glad people like you do appreciate the style I'm going for. Have a great day to you to!
@ericpascual8913
@ericpascual8913 10 ай бұрын
The superglue way is by far the best way to proceed. I was feeling the pain your printer was enduring while you were press fitting the magnets, especially when the hammer entered the scene . By the way, tight fit is not guarantied to work for a series of magnets, because the holes dimensions are subject to small variations. Ditto for the magnets, that are not manufactured as precision parts, especially when bought for a couple of bucks the hundredth from some online Chinese shop.
@DraftID
@DraftID 10 ай бұрын
Trust me, it was painful to bring out the hammer too! In the end In the end the glue was quickest & easiest way to go.
@Javii96
@Javii96 9 ай бұрын
I had a design that I wanted to he heavy, so i paused the print before the top layers and added sand to the infil. Made it all neat and flat so the plastic could bridge nicely over it. All was perfect until the printer started bridging and fans went to 100%. Sand blew everywhere LOL. Still worked though, the print was nice and heavy
@DraftID
@DraftID 9 ай бұрын
I saw something on reddit someone had done that, maybe it was you :p
@Javii96
@Javii96 9 ай бұрын
@@DraftID no not me, but i got that idea from somewhere else so i’m not the first
@aaronrdaniels
@aaronrdaniels 10 ай бұрын
I used this technique last year to make a scraper that magnets to the side of the X1C. cool to see this in my recommendations.
@DraftID
@DraftID 10 ай бұрын
Happy to know YT is pushing my content to new people :)
@kingofcastlechaos
@kingofcastlechaos 10 ай бұрын
I have made 20+ tolerance sample prints for many sizes and shapes to use in my designs, they are critical if you are a designer. Well done. I make them 30mm x 70mm x 3 or 4 mm thick with a hole on the end that I can string them onto a ball chain. That hangs right next to my calipers on the desk.
@DraftID
@DraftID 10 ай бұрын
Good to meet another designer! I like the idea of having that "ready-to-test" chain setup.
@MrMidouCa
@MrMidouCa Ай бұрын
excellent video thank you for your time and efforts, I have this question regarding the insertion of magnets in a support enabled models, I noticeds that If I do have a model that needs support, when I insert holes for the magnets, the slicer tends to fill the hole with support, is there a way to tell the bambu slicer that it's intended to have a hole there?
@DraftID
@DraftID Ай бұрын
Thanks :)
@DraftID
@DraftID Ай бұрын
Sorry I didn’t actually reply to the question. You can right click and add modifiers. So you could add a cylinder, scale it to size and set its object properties to no support. You could also try using the support painting feature
@MrMidouCa
@MrMidouCa Ай бұрын
@@DraftID I see, thank you!
@de_trixa
@de_trixa 6 ай бұрын
13:20 couldn't you also take out the build plate to not force the platform down like this or would that cause layershift?
@DraftID
@DraftID 6 ай бұрын
I was worried about the layer shift. Either way it was not an ideal solution but did get the job done.
@PatrickHoodDaniel
@PatrickHoodDaniel 10 ай бұрын
Very good video and thanks for sharing! Foro the 6.3mm hole, I wonder if a bit of CA glue would work so the tolerances wouldn't need to be perfect each time. Funny, you ended up using glue at the end. Ha.
@DraftID
@DraftID 10 ай бұрын
Yeah in the end I used some glue just because I felt the process was much faster.
@ingGS
@ingGS 4 ай бұрын
Thanks for the video. I enjoyed watching the whole process.
@DraftID
@DraftID 4 ай бұрын
Thanks for watching :)
@ziusudraa
@ziusudraa 10 ай бұрын
Although I don’t understand a lot of things going on here, I’ll always watch your videos. I’m a recent college grad that got interested in engineering because of working in agtech! I’ve been teaching myself solidworks with your help ❤ despite the fact that your newer videos are about things I don’t know (yet) I want to support the channel & pick up from these videos exposing myself to different things. Thank you 💕
@DraftID
@DraftID 10 ай бұрын
Thank you mate! Its been a journey to create content that I want to create but also applies to a wider audience. It seems I have found some recent success in the 3D printing area, but I feel my focus will always be around the general area of CAD, design, & 3D printing, and creating tutorials in those spaces. I think your on the right path and a similar one to my own where I was always looking forward even into new things that I might not understand yet, but I think that helped later on having a little exposure to everything. Good luck on your studies and keep me updated :)
@Dartheomus
@Dartheomus 10 ай бұрын
Neat, I was going to go looking to figure out how to pause prints at a set-point. I'm glad it was this easy. I kept thinking, why not use CA glue, but then you did! :)
@DraftID
@DraftID 10 ай бұрын
Glad it was helpful!
@petethomson
@petethomson 2 ай бұрын
Unrelated to magnets - what filament was used on the square box in the intro of the video? I really like the speckled, stone like finish.
@DraftID
@DraftID 2 ай бұрын
That was probably the bambu marble white filament. Check my other videos cause I did a bunch of showcase videos on the bambu filaments and you will probably find it in the marble filament showcase. Its one of my favourites
@BrandonAdan-o6w
@BrandonAdan-o6w 8 ай бұрын
Thanks for making this! I am glad I watched it I have been wanting to learn more commands in bambu studio. Liked and Subscribed!
@DraftID
@DraftID 8 ай бұрын
Thank you! I'm planning to do a whole series on bambu studio so you can look forward to that :)
@PlumKrazy
@PlumKrazy 8 ай бұрын
Thanks for the video. What is the purple filament you used? It looks so much like anodized aluminum, I love it and need it for myself!
@DraftID
@DraftID 8 ай бұрын
Im pretty sure that is the bambu dual colour silk. Its really nice!
@povilasmartisius138
@povilasmartisius138 10 ай бұрын
I embedded bearings inside gears with similar technique, works great! Just a note - Bambu printer pauses before selected layer printing, not after it, so you can actually pause on the layer which covers the embedded part. That leftover plastic string is constant guest after pause with Bambu, and it annoys me a lot :D
@DraftID
@DraftID 10 ай бұрын
Thats a cool idea about the bearings. Thanks for adding about the pause at start of layer. Couple people have pointed that out and I'm surprised I missed that. Its been great everyone being nice and helping the community here though so thanks for your comment :)
@NWGR
@NWGR 9 ай бұрын
Awesome tutorial. Adding it to the bag of tricks.
@conorstewart2214
@conorstewart2214 10 ай бұрын
Now with the pausing does it pause at the start or end of the layer? I know with changing filament at a certain layer it changes it at the start of the layer, so in your example if you wanted to change colour for the layers printed on top of the magnets you would have to have the colour change one layer up from where you set the pause, so on the layer where it goes over the holes. It might be worth slowing the print down at that stage to see if it does the pause at the start or end of the layer.
@DraftID
@DraftID 10 ай бұрын
Someone pointed this out to me earlier and said it pauses at the START of the layer. They recommended that I should add the pause at the layer where it will be doing the top wall over the magnet since it will pause at the start of that layer and when you resume it will be laying down the top wall on the magnet.
@FEDGEZZ
@FEDGEZZ 10 ай бұрын
I have tried this, but the layer thickness of plastic between the magnets will have a noticeable effect on the holding power. I was doing fridge magnets and went back to my older method of gluing. Same thing with a carbon filter for my 3d printer--that 0.4mm wall just doesn't help hold as well as direct magnet to magnet.
@Ub3rMario
@Ub3rMario 10 ай бұрын
This is true so you either have to use stronger magnets or more of them.
@DraftID
@DraftID 10 ай бұрын
It is true, the more distance means less magnetic effect. I found mine where at a good distance so there could be other variables like magnet quality etc. I suppose larger magnets could also be used like 8x4 or something.
@peaceorpieces8343
@peaceorpieces8343 10 ай бұрын
Cool video, marking the magnets is a tip i needed a while ago
@DraftID
@DraftID 10 ай бұрын
I noticed some magnets come marked which is nice but if not just mark them yourself :)
@darrennew8211
@darrennew8211 10 ай бұрын
An easier way is to take a pair of chopsticks and glue small magnets to the tips with opposite polarities. Then color-code the sticks. Pick up the magnets with the stick, and you'll always have the correct side. Lids are blue, bases are red, that kind of thing.
@btan4209
@btan4209 10 ай бұрын
Really enjoyed your insights. I was just looking how to do this, you sure helped with hole sizes and top layers. Thank you
@DraftID
@DraftID 10 ай бұрын
Your welcome! :)
@jacobchristianglover3655
@jacobchristianglover3655 10 ай бұрын
Hello from Tampa Florida! Great design and tutorial... is there a way to use Cura with your design?
@DraftID
@DraftID 10 ай бұрын
I'm sure there is a way to do it. I don't know personally since I haven't used cura for a long time.
@CriticalErA
@CriticalErA 9 ай бұрын
This is amazing. I just purchased X1C this past weekend and looking to make models with magnets. I am a complete newbie and see that you are using fusion 360, would you say that fusion is easier to learn for someone who has no experience?
@DraftID
@DraftID 9 ай бұрын
Congrats on your new purchase! Your going to get a lot of fun out of it. I think fusion 360 is a great CAD package for beginners and there is heaps of content out there to get you started. You will be making your own basic models in a couple of weeks for sure.
@TheThursty100
@TheThursty100 10 ай бұрын
I just did a print with magnets. I created a hollow tube just wide enough for the magnet to fit in but taller than the magnet. Then I used the same model for the tube in cura and added it alongside the print I actually wanna print. Using the tube model as a cutting mesh without walls top/bottom layers. Just void and placed it inside the model I wanted to print. Now I can insert the magnet pipe into the print and it gets embedded that way. The magnet isn't near the nozzle. This of course only works if you can print something with magnet lower down, so might need to turn a model upside down. And it also needs enough space above for the pipe. Put works great!
@DraftID
@DraftID 10 ай бұрын
Thats really cool, thanks for sharing!
@xyz-yb6ep
@xyz-yb6ep 8 ай бұрын
great tut, very informative, learned alot, thanks!
@DraftID
@DraftID 8 ай бұрын
Thank you :)
@floatypiet
@floatypiet 5 ай бұрын
Thank you a lot for saving me a lot of time!!!❤
@DraftID
@DraftID 5 ай бұрын
Your welcome, hope you enjoyed it :)
@Lukis3D
@Lukis3D 10 ай бұрын
this is a great tips! thanks will try it out!
@macdox69
@macdox69 10 ай бұрын
Whether embedding the magnets during printing or adding them after I would recommend using the larger drop in size if you are using CA glue. If you go with the tigther size and if you add too much glue or have a thicker type or brand (gel), it tends to leak out which can cause other issues including getting on your fingers. 😏
@morgenkaffe
@morgenkaffe 8 ай бұрын
Great video. I do this. lot my self. But I leave it at 3 layers on top or distance from the bottom (0,6mm), it give the best result imo. I also use the the 0,2mm clearance for the holes, so the magnets has a tight fit.
@DraftID
@DraftID 8 ай бұрын
Thank you :)
@3DPI67
@3DPI67 10 ай бұрын
Very informative video, thanks. Instead of trying to chase tolerances, you can make an oversized cavity, use a drop of CA or hot glue to hold them in place.
@DraftID
@DraftID 10 ай бұрын
At the end of the video I actually go for a slightly larger hole and use glue :)
@nuchbutter
@nuchbutter 10 ай бұрын
Ooh. I've got a Formlabs Form3. Trying to figure out if pausing in the of the print will cause problems. Also, SLA prints upside down...
@DraftID
@DraftID 10 ай бұрын
Yeah, I think your going to have a bad time trying this with a resin printer.
@eder.merino
@eder.merino 10 ай бұрын
That's a really well-made video, with great tips and a deep explanation of each step. I am glad you made such an informative video, but seeing that build plate flex in 13:23 almost killed me. I would suggest to add a slighlty higher tolerance, such as 0.25mm and use glue to stick the magnet, or use even higher tolerances like 0.3mm but adding some ridges along the perimeter, as the magnet will deform the ridges to fit but staying tight till the end of the print.
@DraftID
@DraftID 10 ай бұрын
Thank you, it was a fun video to make and I was always worried about saying too much compared to other videos where they just say a few lines of what they are doing over b-roll. As I continue with more videos I'm sure ill find an area between what works for me and what the viewers like. I hated pushing down on the build plate so hard too! Thats why I continued the video and decided to increase size and use glue instead. I was previously going to stop the video there as prior prints had been fine at 6.2mm, as soon as I film it I'm having to use so much effort :p I think your suggestions are good ideas too and I might have to make a follow up video showing some of these extra tips
@ken830
@ken830 10 ай бұрын
You added the pause on the wrong layer. When you right click the layer, and hover your cursor over the Add Pause option, it clearly tells you that it will "insert a pause command at the beginning of this layer." That means you should add the pause on the layer that covers the magnet, not the one before.
@DraftID
@DraftID 10 ай бұрын
That’s a really good point, sorry for missing that. Still works in this case but means I’m actually a layer behind. Thanks for picking up on that. Highlighted your comment so others hopefully see.
@edchobanyan
@edchobanyan 10 ай бұрын
You saved my work today)))) THHANKS!
@DraftID
@DraftID 10 ай бұрын
Great!
@leon2arts
@leon2arts 5 ай бұрын
very helpful, thanks for this👍
@andyl2201
@andyl2201 8 ай бұрын
Thanks for an excellent instructional video 👍
@DraftID
@DraftID 8 ай бұрын
Very welcome
@MarkHarrop
@MarkHarrop 10 ай бұрын
What a great tutorial, thank you for taking the time. I have downloaded your files and will attempt to try it out.
@DraftID
@DraftID 10 ай бұрын
Good luck, hope it prints well :)
@RB-vf9xn
@RB-vf9xn 10 ай бұрын
nice. give the holes a slight chamfer to ease inserting the magnets....
@DraftID
@DraftID 10 ай бұрын
Good idea!
@mcorrade
@mcorrade 10 ай бұрын
so this is great but is there a switch or way to pause in Cura? I tried the right click but that seems to be a Bambu only?
@DraftID
@DraftID 10 ай бұрын
I found this which might help. Otherwise you could try orcaslicer which is a fork of bambu but with more printers. all3dp.com/2/cura-pause-at-height-how-to-do-it/
@mcorrade
@mcorrade 10 ай бұрын
@@DraftIDthanks much appreciated
@brotherscardshop5491
@brotherscardshop5491 6 ай бұрын
For polarity I made a cube with up and front (towards yourself) and made all my magnets in the directions that match so if you had two cubes they'd stack if both kept in the same orientation. The only thing you then have to remember is to turn the cube if one of your parts is turned that way.
@DraftID
@DraftID 6 ай бұрын
I like the idea. I sort of did that with a bulk amount of products I was printing and I would use one of the prints as my "base" so that all magnets would align with it.
@sloppyfiish
@sloppyfiish 10 ай бұрын
which magnet size should i buy for 3d printing
@DraftID
@DraftID 10 ай бұрын
I find the 6x2mm neodymium are a good option. Small enough but good attraction for small projects. In Australia I find I can mostly find these for a good price on ebay but depends on your location. Shop around to make sure your not over paying. 100pcs for $13.85 + shipping.
@andreimerisanu9995
@andreimerisanu9995 10 ай бұрын
Really enjoyed this and learned from it. I'm going to be using this technique for speaker grill project. Can you recommend a good glue for this purpose?
@DraftID
@DraftID 10 ай бұрын
Cool! I have used a few different "super glues" and even just the cheap ones will work fine. I just find the cheaper ones will clog up easier making it hard to use the next time while spend a little more and they seem better at being able to use until the tube is empty.
@ruthere99
@ruthere99 9 ай бұрын
...also, I've learned that super glue keeps much longer if you refrigerate it. @@DraftID
@DraftID
@DraftID 9 ай бұрын
@@ruthere99cool tip, I did not know that!
@paulriggs42
@paulriggs42 10 ай бұрын
Thanks for a great helpful tutorial !
@DraftID
@DraftID 10 ай бұрын
Glad it was helpful!
@pierreduprey9032
@pierreduprey9032 8 ай бұрын
Such an informative video, thank you!!
@DraftID
@DraftID 8 ай бұрын
Your welcome
@jameswadkins8082
@jameswadkins8082 28 күн бұрын
Do you have a video on how to setup Fusion 360 to print directly to the Bambu printer? That is cool.
@DraftID
@DraftID 25 күн бұрын
I could do one for sure! Ill add it to my list and get out asap :) Thanks for the suggestion!
@andyb7754
@andyb7754 10 ай бұрын
Very interesting and informative video, thank you.
@DraftID
@DraftID 10 ай бұрын
So nice of you
@Brock-Landers
@Brock-Landers 10 ай бұрын
The super glue was the best idea. I do my best not to disturb any axis during a print pause when changing color or adding weight (or magnets).
@DraftID
@DraftID 10 ай бұрын
Agree, I think it was the easiest way in the end.
@mslegallyotaku
@mslegallyotaku 8 ай бұрын
This video was extremely informative and exactly what I was looking for :) Here is your sub and like!
@DraftID
@DraftID 8 ай бұрын
Awesome, thank you!
@AGILISFPV
@AGILISFPV 10 ай бұрын
Awesome video thank you for sharing!
@DraftID
@DraftID 10 ай бұрын
Thanks for watching!
@bobhuffman7412
@bobhuffman7412 10 ай бұрын
What a valuable video! By the way, where do you keep the box with the gold coins?
@DraftID
@DraftID 10 ай бұрын
In a secret spot of course! :p
@bmike410
@bmike410 10 ай бұрын
I find that if the magnet is close enough to the bed the magnetic bed holds it enough that the hot end doesn't pick it up. You could achieve this by flipping your models and printing them upside down. Extra bonus is that you can insert all your magnets with 1 pause.
@DraftID
@DraftID 10 ай бұрын
Another interesting tip from the community thank you. Something to keep in mind when designing for 3DP.
@conorstewart2214
@conorstewart2214 10 ай бұрын
This also works for lots of things other than magnets. Nuts are a common example. Weights is another one.
@DraftID
@DraftID 10 ай бұрын
Yeah I agree, some interesting things you could do which I'll have to think about. I also considered nuts but didn't think about adding weights which could have interesting applications too.
@skelethornbro
@skelethornbro 10 ай бұрын
Thanks for the video! Maybe you can make the hole bigger little bit then make 4 flange that inset to the size of the magnet to hold it. So the pressure/stress will be only at the 4 corner of the inset rather than whole circle.
@DraftID
@DraftID 10 ай бұрын
Thats a cool idea and something to explore. Allows for a friction fit without the force required to push it in.
@whothewho82
@whothewho82 4 күн бұрын
This was really great, I don’t have a printer yet but I’m preparing for one 🎉🎉
@DraftID
@DraftID 4 күн бұрын
You’re in a whole new world of creation and ideas once you get one! All the best in your 3d printing journey.
@ernie5229
@ernie5229 7 ай бұрын
Does anyone know if it's true that you can't do this with the Bambu Lab's A! series? They say the print heat will stop if you try to go over a magnate.
@DraftID
@DraftID 7 ай бұрын
Hmm I haven't heard anything like that but I don't own an A1 so not closely watching the socials on it.
@anthonygsimon
@anthonygsimon 2 ай бұрын
Late to the party, but I have an A1 and haven't had any issues with using magnets and printing over them.
@blakemitchell6039
@blakemitchell6039 10 ай бұрын
im gonna have to give this a try, thanks
@DraftID
@DraftID 10 ай бұрын
Happy to share.
@theboredtrucker3898
@theboredtrucker3898 8 ай бұрын
How much does the plastic reduce the attraction of the magnets?
@DraftID
@DraftID 8 ай бұрын
If you keep it to just a couple of layers then there is enough attraction between them still.
@plasticcreations7836
@plasticcreations7836 10 ай бұрын
Guessing you've got a steel nozzle? Brass isn't magnetic AFAIK so would work without worrying about the tolerances. Or for those who have one a diamond nozzle would also work. I tried getting a Prusa to pause like that a while ago and it didn't work - they could have fixed it since.
@DraftID
@DraftID 10 ай бұрын
Someone else pointed this out too that you could use a brass nozzle so it wasnt magnetic. It might not be compatible with exotic materials but it all depends on what you need :)
@ulrichlachmuth4130
@ulrichlachmuth4130 10 ай бұрын
A sheet metal flex build plate and/or some sort of coverage on the bed probe solves the problem of magnets being pulled out. They're definitely not pulled out by the hotend since there's nothing magnetic in a hotend (unless you use a steel nozzle), mostly it's the probe pin of the ABL or sime low-sitting nuts/bolts on fan shrouds.
@davidb.2355
@davidb.2355 10 ай бұрын
Great video..thank you for sharing.
@DraftID
@DraftID 10 ай бұрын
Your welcome, was a fun one to do.
@notblanketto
@notblanketto 9 ай бұрын
what filament is the white one?
@DraftID
@DraftID 9 ай бұрын
That is probably the bambu lab marble filament.
@IamMrDisaster
@IamMrDisaster 3 ай бұрын
Use a too large circle with interference nibs. Those will be much more tolerant to variability in the diameter. You only have to compress the tips of the nibs instead of overcone the hoop strength of the circular loop.
@DraftID
@DraftID 3 ай бұрын
This is a really good tip. Thank you
@DonVintaggio
@DonVintaggio 2 ай бұрын
Mmm for something under constant stress like a cover I don't think just 2 layers of .2mm of filament will hold, giving that the force the magnets exert are indeed in the z axis which is by far de Achiles heel of FDM printing.
@DraftID
@DraftID 2 ай бұрын
I found the magnets were not strong enough to be a concern
@hu5tle-
@hu5tle- 7 күн бұрын
what was that speckled filament?
@DraftID
@DraftID 7 күн бұрын
The white is bambu labs PLA marble (white) The red is bambu lab PLA sparkle (crimson red)
@hu5tle-
@hu5tle- 7 күн бұрын
@@DraftID thanks
@desparky
@desparky 10 ай бұрын
Great video. My only suggestion is instead of just printing round holes which require a small tolerance to friction fit the magnets, print a slightly oversize hole with three tiny ridges that run down the sides of the hole to create enough friction to hold the magnet in place. This would be a lot more forgiving.
@DraftID
@DraftID 10 ай бұрын
I think thats a pretty cool idea!
@tomaszgasecki
@tomaszgasecki 7 ай бұрын
Thank you for sharing
@DraftID
@DraftID 7 ай бұрын
Your welcome!
@saguru123
@saguru123 10 ай бұрын
Pretty sure the M400 is placed at the beginning of the layer code, so you should put it on the layer the transition happens not the one below it. This has been my experience with Bambu studio.
@DraftID
@DraftID 10 ай бұрын
Yup its true, my mistake sorry. It should be placed at the layer the top wall goes over since it pauses at the start of the layer. Ill probably make a correction video plus some extra tips
@PCBWay
@PCBWay 10 ай бұрын
This is so GOOD!
@DraftID
@DraftID 10 ай бұрын
Thank you! :)
@sleeverobot
@sleeverobot 10 ай бұрын
I can't use this pause and insert technique because mine has a CR Touch probe. The magnet pulls the probe down, and the probe scrapes or collides with parts of the print, which is potential damage.
@DraftID
@DraftID 10 ай бұрын
Damn that sucks. I hope one day you can make the upgrade to a bambu printer and that wont be a problem anymore :)
@sleeverobot
@sleeverobot 10 ай бұрын
@@DraftID Hopefully one day I'll upgrade to something. I was looking at Prusa MK4. Haven't heard much about Bambu, but I'll keep it in mind. My main concern is a printer where it is easy to print a perfect first layer. The Ender 3 S1 is giving me no shortage of grief in that department.
@DraftID
@DraftID 10 ай бұрын
Definitely check out bambu lab, they are really leading the market right now and takes so much of the "tinkering" out of the process. I used to have an ender 3 and spent plenty adding auto bed levelling etc and still have to deal with issues to get it to print right. Once getting an X1C bambu printer I cut my print times down to a third yet still had better quality.
@sleeverobot
@sleeverobot 10 ай бұрын
@@DraftID thanks for the advice! $1500 is pretty pricey but maybe in the future
@DraftID
@DraftID 10 ай бұрын
@@sleeverobotan inestment for sure, but also check out the A1 or A1 mini
@J.Severin
@J.Severin 8 ай бұрын
thats awesome, thx 4 the video
@DraftID
@DraftID 8 ай бұрын
Your welcome!
@dbtest117
@dbtest117 10 ай бұрын
As it was the diameter and not the radius you set as 0.1 and 0.2 and 0.3 the actual tolerance for your part are in fact 0.05, 0.1 and 0.15. Nice job of your printer I have to say and the magnets seems to be accurately dimensioned too.
@DraftID
@DraftID 10 ай бұрын
You are totally correct and I am surprised I overlooked that. You get tunnel vision sometimes on a project and forget the little things :)
@coolergappney1943
@coolergappney1943 10 ай бұрын
I use 8x2 mm and to get them to snap in, and stay flush. Make the hole .25 mm wider than the magnet and .5 mm deeper than the magnet is thick. Its either perfect or a little wide so just glue it in and no one will knkw otherwise.
@ItsArekkusu
@ItsArekkusu 2 ай бұрын
Probably super late, but I do it the same way using the slightly larger hole, and just throw a dot of superglue on the magnet before tossing it in. Works great since you dont have to force it in and potentially unlevel your bed.
@DraftID
@DraftID 2 ай бұрын
Never too late to comment, just like I am late to reply :p I agree and in the end that’s the method I go with. A drop of CA glue in a loose fit hole and no problems.
@cthulpiss
@cthulpiss 10 ай бұрын
Curie temperature ?
@Mrstrikerace
@Mrstrikerace 8 ай бұрын
If you are using brass nozzles why did it jump out?
@DraftID
@DraftID 8 ай бұрын
Mine are hardened steel so its magnetic
@KiR_3d
@KiR_3d 10 ай бұрын
IMHO using only magnets is overkill! You can insert steel washers or nuts in the opposite holes. Usually you don't need that super strong connection for little jewelry boxes. It's not a total user experience advice though :) But if you have some bigger magnets then it can work pretty well. Also you can use simple screws in the main part if you don't want to pause a print twice. After finishing you can use a wood primer or epoxy. I think that it can be used as a style as well!
@DraftID
@DraftID 10 ай бұрын
Yeah theres a few things you can do with this method using pauses to add things into your print designs which is pretty cool. I went with magnets in this case as I have been using them in a few projects and I really like that "snap" effect ")
@snart
@snart 10 ай бұрын
Thanks for this!
@DraftID
@DraftID 10 ай бұрын
My pleasure!
@ricardohnn
@ricardohnn 7 ай бұрын
can i ask like... isn't it better to make the part solid where the magnets will be, and just... drill the hole?
@DraftID
@DraftID 7 ай бұрын
I suppose you could but you might end up chewing up the material.
@Bbluenight
@Bbluenight 10 ай бұрын
very nice!
@DraftID
@DraftID 10 ай бұрын
Thank you! Cheers!
@relierma
@relierma 9 ай бұрын
May need a drop of superglue if not tight enough or magnet may jump to print head ask me how i know
@DraftID
@DraftID 9 ай бұрын
Keep watching the video and you will see I take that advice :p
@AbrahamMorgado
@AbrahamMorgado 9 ай бұрын
I would suggest to use ca glue and a barely larger hole to place the magnet.
@AbrahamMorgado
@AbrahamMorgado 9 ай бұрын
hahaha I should waint to finish the video before commenting
@DraftID
@DraftID 9 ай бұрын
@@AbrahamMorgado not the first to do that :p
@jimfromburbankca5253
@jimfromburbankca5253 6 ай бұрын
Using a hammer on a 3d build plate??? Thats a bright idea. Still, you need to do whatever will get the job accomplished. Recommendation - next time you build a test block, add more holes at different dimensions to fit your part. I would have used 6.10, 6.15, 6.20, 6.25, etc. The greater number of test patterns, the better the fit. Thanks. Great content.
@DraftID
@DraftID 6 ай бұрын
The hammer was not an ideal solution but had to do something. Pretty sure in the video I make a test block to fit different sizes.
@meanman6992
@meanman6992 9 ай бұрын
Understand, clearance is the gap between two surfaces. Tolerance is the allowed amount a specified distance is allowed to be off, either + or -. This is why you see some measurements specified as say 10mm +/- .1mm or .3125” +/- .0005”. The target distance is given then the allowable error which is the tolerance. Please use the terms correctly.
@DraftID
@DraftID 9 ай бұрын
This is a good point and I think in the moment on recording these concepts can often slip the mind as you focus on delivering. Its often like speaking to a crowd and you stumble over your words a bit, only to look back after and realise there are some things you could have said better.
@SantaDragon
@SantaDragon 9 ай бұрын
What is the sense of three same high positioned magnets? I thought it would be to test the magnetic strength with three different depth of the magnets. On the same height its totally wastes material and time. Then it would be enought to print one zylinder with one punch for magnet.
@DraftID
@DraftID 9 ай бұрын
The point was to test fitment, 2.1 2.2 and 2.3mm, its explained in the video.
@TredeRenato
@TredeRenato 10 ай бұрын
Awesome! 👏
@DraftID
@DraftID 10 ай бұрын
Thank you! Cheers!
@TS_Mind_Swept
@TS_Mind_Swept 9 ай бұрын
I was thinking it would probably be a 0.2mm offset for a friction fit at this size from my own endeavors, good to know it works for more than just my printer SeemsGood
@DraftID
@DraftID 9 ай бұрын
even a .25 might be a good spot for friction fit
@TS_Mind_Swept
@TS_Mind_Swept 9 ай бұрын
@@DraftID yeah, when the things are this small even the slightest adjustment can make a pretty big difference..
@paulnieto3729
@paulnieto3729 10 ай бұрын
When using this method I have used a gel superglue to lock them in place as well
@DraftID
@DraftID 10 ай бұрын
I think its the much quicker and easier way to go about it :)
@ROOKTABULA
@ROOKTABULA 7 ай бұрын
Are you not worried about the cumulative stress you're putting on the bed support structure over time pressing all these magnets in against the bed?
@DraftID
@DraftID 7 ай бұрын
Yes which is why later in the video I decided to increase the size and glue the magnets in rather then press fit them in.
@whynotanyting
@whynotanyting 10 ай бұрын
Hmmm, now if there were a way to automatically place those magnets without having to pause the print and wait for user intervention 🤔
@DraftID
@DraftID 10 ай бұрын
haha going for some crazy automation setup ideas hey :)
@whynotanyting
@whynotanyting 10 ай бұрын
@DraftID I'm already think up of some crazy ideas. If only I were skilled enough...
@TheTriexy
@TheTriexy 7 ай бұрын
Hmm or clue it with superglue :D because I saw how far the bed was moving, I dont think that isnt good for the mechanic if u do it more times.
@DraftID
@DraftID 7 ай бұрын
Watch till the end :p
@ArnaudMEURET
@ArnaudMEURET 10 ай бұрын
TL;DR Don’t waste your time chasing the right tolerance for all magnets, just use Super Glue like you’ve seen it done everywhere else 🤷🏻‍♂️
@DraftID
@DraftID 10 ай бұрын
Its always good to try everything and each option has their pro/cons. My videos are to show the process and document what I learn along the way.
@conorstewart2214
@conorstewart2214 10 ай бұрын
Most people just use the same size of magnet for most things that they do, so for most people they just need to find the right size once. Also the magnet sticking to the hotend is likely only an issue for steel nozzles.
@11WicToR11
@11WicToR11 10 ай бұрын
i dont see any reason not to use glue there ...i put one small droplet on top of magnet and put it there. I dont see single drawback of this, it even minimizes the possible noise that could happen as magnet moves in slightly larger hole it needs (mostly on top)
@stevenfixo
@stevenfixo 10 ай бұрын
He did...
@ArnaudMEURET
@ArnaudMEURET 10 ай бұрын
@@11WicToR11 Exactly!
@traceurAlex
@traceurAlex 5 ай бұрын
i had problems with the magnets losing power, due to the heating of the nozzle. solution was start splitting a part in 2 parts and just glue them with super glue
@DraftID
@DraftID 5 ай бұрын
I found mine were ok with the heat from the nozzle. Might be a quality thing?
3D Prints with Magnets, Threaded Inserts, and More!
25:04
Butter Pockets Prints
Рет қаралды 23 М.
3D Print Parts that Fit with FREE Conversion Calculator
17:18
ItsMeaDMaDe
Рет қаралды 61 М.
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
Каха и дочка
00:28
К-Media
Рет қаралды 3,4 МЛН
Что-что Мурсдей говорит? 💭 #симбочка #симба #мурсдей
00:19
The Ultimate Guide to Smoothing & Finishing Your 3D Prints
21:33
M.M's Prop Shop
Рет қаралды 503 М.
Does a wobbly table RUIN print quality?
11:55
Maker's Muse
Рет қаралды 214 М.
Must Have Tools For 3D Printing
9:35
Arne Bornheim
Рет қаралды 96 М.
25+ FUNCTIONAL Last Meter 3D Prints!
15:01
The Next Layer
Рет қаралды 104 М.
I had ASA Poisoning! 25 IMPORTANT Filament Answers!
27:26
Loyal Moses
Рет қаралды 308 М.
I Tried Starting a Sidewalk 3D Printing Business
17:47
Morley Kert
Рет қаралды 766 М.
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН