Leveling up! Setting up the New Excavator for an ENGCON Tilt rotator!

CHECK OUT THE WEBSITE\/\/\/\/\/\/ VBELTANDSON.COM EMAIL [e-mail]
Interested in Engcon?
Give this gentleman a call
Sean Connelly
[e-mail]
Thanks for watching

[@thebigfut]

Those attachments are true time recovery units right there. Going to make life much better for y'all.

[@HootakaBJ]

I have watched “Hedblom” use his for years!! Looking forward to you learning to “Show Off” tooo!!

[@diggingwithdylan9092]

You’re going to love that thing ! I got a Nox tiltrotator and it has been life changing!

[@TheTsunamijuan]

The camera, with the wide angle lens really doesn't do these justice. For how big they actually are. Quite impressive gratz man!

[@ryanhewett1820]

Wish we had one at work for digging and backfilling around utilities

[@villageearthwright]

I basically never dig with the tooth bucket, that grading bucket digs great! It all depends on the soil type.

[@waiakalulu1568]

I watch another channel with a guy that runs a tilt rotator with all the dexterity that would have you believe he could turn the pages of the Bible with the thing. Mind blowing. Love the home made dongle electrical connector, too!

[@duanemorrison6173]

LOL "Home made dongle"

[@Joneseliteexcavating]

I love mine I'll never buy another excavator with out one totally a game changer

[@michaelrasmussen5430]

Im from denmark and I drive a weeldigger volvo ew160e with trailer and rotortilt 😊i been driving with tiltrotator for 15+years now and it is a great thing especially for your man in the trenches

[@polarViking]

Congrats on bying a really good attachment to your hitachi. I have a 2016 komatsu pc78, with same size engcon on, just without the ec-oil. Got 6000 hours on the machine, and between 5000 and 5500 hours on the engcon. I grease it minimum once a day, depending on the work. What i find funny here in the comments is how everyone says it is a game changer, while here in norway we have been using tilt rotators for over 20 years. Rototilt are really good tilt rotators to, but engcon is just overall a bit stronger built. On my next machine i will have 3d gps and engcon with ec-oil :)

[@georgeenriquez612]

Nice Sam! That’s exciting and absolutely a game changer

[@adrianhowley7754]

Congrats to belt and yourself you gentlemen deserve all you have for sure! ❤️the content bud!🤙🔥

[@michaelweatherhead9470]

Nice haul for the excavator awesome 👍 Sam. Take care of yourself and family and be Blessed ❤️❤️👍.

[@-S-K-Miller]

Encon give influencers a deal? So jealous! Good on you!!! My poor bank account!! I'm going to check out an Axis Titorotator and an Oil

[@VBELTandSON]

I’ve wanted an Engcon for a very long time well worth the hype I’d say

[@mikestrucks]

Nice one buddy ! This are some nice tools 👌🏻💪🏻

[@5150cash]

Dang 🤘🏽🤘🏽 that's some game changing attachment looks like you're going to have to get a second driver to haul all your attachments for you

[@VBELTandSON]

😂😂

[@semorebutts1736]

If I've said it once I've said it a hundred times boys and their toys but nice to see you got some good equipment and that bucket did look backwards to me I'm glad you clarified that you did a 180 on it

[@gtr1952]

Wow, that is very cool! At first I was wondering how they worked just after picking them up! That's really cool!! I'm a pack rat, I'd have to snag those 5/4 boards off the sides of those crates. Ya never know, lumber is expensive! 8) --gary

[@tiptoplandsolutions1421]

Awesome Sam ! Happy for you..

[@VBELTandSON]

Thank you so much 😀

[@lyndonhamby7432]

Crazy kool equipment Sam I like it 👍

[@sprucegoose1016]

Now that's some nice gear bud 👌

[@joshuawhitford5036]

Damn man, that is nice. I want a tiltrotator so bad it’s not even funny. Jealous.

[@johnlundvall8911]

It's things like this that makes you a little bit pride over being a Swede. Nice to see your business going so good.

[@Forestryman707]

Would love to see a rotobec with an Ec oil. I have yet to see one under a tilt rotator

[@jacksonnelson265]

Since you're getting all the specialty equipment you should get a Marooka for the low price of 100k. Keep up the good work Sam.

[@carltauber2939]

Another great video Sam, I'm glad to see you adding new equipment. It's great to see that business is good. We haven't heard much about Grandma's truck lately, do you still drive it regularly? And whatever happened to the 24-valve engine, did you ever repair it?

[@VBELTandSON]

Thank you and I rarely drives grandmas truck. Maybe put two tanks thru it since restoring it. And the 24v is still unknown. I haven’t touched it. To much going on to get around to it

[@dusty-6996]

Great video editing 🤌🏻🤌🏻

[@VBELTandSON]

Thank you 🙌

[@williamuskoski1385]

These engcons are sooooo badass. Take about five minutes to figure out if you can run a machine

[@coderOfFortune]

What type of truck is shown at @1:33? It's fantastic!

[@coderOfFortune]

It's a hook lift truck from what I was able to find. kzbin.info/www/bejne/mJ6wf2Cgj72nis0 I wonder if they are available for rent.

[@randywilson6869]

Have u seen that rooster ripper for stumps

[@richardharvey8939]

Nothin like septic lines. Crappy job but somebody got to do it.

[@eddietreiber2821]

How much did the engcon tilt rotator cost you? Including electronics and everything you need for tilt rotator?

[@VBELTandSON]

Contact Sean. Info in description For current pricing.

[@moderskeppets]

Welcome to the swedish way!

[@VBELTandSON]

I’m a big fan

[@moderskeppets]

@@VBELTandSON Cool stuff, its attached to about 90% of excavators here in Sweden. Gonna be fun see you run it, suits your business well. Good luck!

[@henryoppermann134]

I have one on my 80 and love every bit of it, once you get muscle memory down for all the controls..sweet equipment.

[@henryoppermann134]

Ive been looking into a grading beam…but they are in short supply.

[@moderskeppets]

@@henryoppermann134 its pretty easy to weld your own. If you make one without the wheel thing. Basically just 4 pieces of i-beams and a new attatchment. Way cheaper too. 👍

[@johnwinsemius4423]

question how does takeuchi compare to the kubato 80 you just got, size for size being equal

[@VBELTandSON]

I had a 290. Sadly took it back to the dealer and bought the mecalac which out performs both of them but The 080 out lifts the 290 easily and felt way more stable. I really wanted a 290 but after running one on jobs I learn that the 080 was quite a bit better. Boom size is thicker on the 080 also

[@johnwinsemius4423]

how do the hydrolics compare? grapple and forestry mulcher performance@@VBELTandSON

[@VBELTandSON]

@@johnwinsemius4423 I’d take the 080. Both smooth mulcher power are similar. Not quite enough but gets the job done

[@Mr.BrushCutter]

What program do you use to edit and create your youtube videos? Cheers keep up the good content

[@VBELTandSON]

Thank you and Final Cut

[@johndoe1909]

more or less exoected standard equipment here in europe. a machine without one isnt worth much.

[@VBELTandSON]

I can see it being worth it but most companies here find it hard to justify an attachment that cost as much as another tractor

[@chrisbee4702]

Now all he needs is some employees.

[@VBELTandSON]

Naw

[@randywilson6869]

Your not No hedblom YET

[@domforte2966]

you pay a lot of money to get all those nice attachments and they're still made in china