Lexus IS200 1GFE Dyno Run stock + performance exhaust

On 30th of january 2016 I took my Lexus IS200 to check and see what 15years of use has done with the power and I was really happy to see about 1 extra horsepower! :D You can see the power plot in the end of video.
Another plots: chomikuj.pl/dvdix/Lexus+IS200+...

[@milanzivkovic4336]

This is at the wheels...that would mean that you've got probably around 15-20hp at the engine :)

[@timocallaghan4408]

wow right on factory values.

[@BnRR34]

What was the power gain over the stock exaust?

[@BnRR34]

I am thinking about removing the pre-cats but the gain due to reduced hydraulic losses would be small. Also i am thinking that there is some loss due to backpressure not beeing the same. What is your oppinion on the matter?

[@dedelabinouze5110]

Not the owner but you probably won't gain any significant power. Maybe 3-5hp *with a tune*. You'll loose a bunch of weight though.

[@deboxonline]

Which exhaust ??? Only backbox ??

[@sabakag]

I am really surprised about results. Because usually the power rating at the wheels are much less than the manufacturer shows (they measure the power of the engine itself, not what you get at the wheels). Maybe that's why many people are surprised about how my car (IS200 Sportcross) drives.

[@Totaunus]

This is the corrected power I think.

[@donfranki]

It is depend of type of norm. Many of cars have more power, than manufacturers suggests, especially turbocharged cars.

[@j_kuni_4437]

How much mileage has the car at that test?

[@MrCopRobo]

Abt 200.000km

[@Vlad_Nik_123]

Сколько в итоге показала?

[@MrCopRobo]

208hp at 0.5bar

[@MrCopRobo]

Aaa in this video was original and it was 156hp, later was compressor 0.5 bar and 208hp and now I have turbo and 0.7 bar but still not checked on dyno.

[@osozig68]

@@MrCopRobo 0.5bar with supercharger and 208hp, on flywheel right ?

[@MrCopRobo]

@@osozig68 yes

[@donfranki]

1KM to mniej, niż błąd pomiarowy.

[@MrCopRobo]

Lepszy jeden w górę niż 20 poniżej serii ;)