All About the 1G series Toyota Engine

Hello everyone!! In today's video I will be delving into the Toyota 1G series engine. I do apologize for the audio quality as my mic was acting up. But I do hope that you guys would enjoy!!
Follow me on Instagram:www.instagram....
Do subscribe if you would like to support the channel! And I greatly appreciate you guys for viewing!!😊
#toyota #1GFE #1GGTE #旧車 #エンジン開発 #トヨタ #名機 #昭和時代 #trd

[@olordkopma6481]

What quality of fuel does this 1G-FE engine require? Or, is it okay to use regular unleaded fuel?

[@JWorldAdventures]

It's completely alright to use regular unleaded fuel.

[@raygatsi6571]

Hi everyone is 1G Engine the very same with the ones on Lexus?

[@JWorldAdventures]

From which model are you pertaining to? But yes, Lexus is just the luxury brand for North America of Toyota. I hope that I was of some help in answering your question.

[@nsxmod1]

So the head on the 1g-fe was codesigned with yamaha or the whole engine....what is the lifespane of a well maintained 1g-fe?

[@JWorldAdventures]

It was only the cylinder head that was codeveloped with Yamaha. properly maintained, there's no reason not to reach 500k kms easily. Before any rebuilds

[@EfrainFavelaJr]

Anyone know if I can bolt on or how to install a r154 to 1g-fe

[@JWorldAdventures]

It won't bolt up unless you have an adaptor plate. The J160 and W58 are straight bolt on.

[@medakabox2015]

can I push the 1g-fe beams to 220 hp from its stock 160hp without changing majority of its parts?

[@aksdan7783]

Yes a turbo doesn’t require you to change much, first start with the throttle body mod, make sure the timing belt is serviced completely. Turbo the engine 7-10 psi on stock internals. You will see 220-300hp

[@aksdan7783]

Lowering the compression will allow you to run 10psi more reliably but the noted psi sweet spot is 7 psi on td05 turbo

[@medakabox2015]

@@aksdan7783 the fuel in my country is horrible . that's why I was wondering cause my friend gets 135 ish hp

[@JWorldAdventures]

Yes it's possible as @aksdan7783 had already pointed out. But as you said quality of fuels from where you live are not so good. I would like to kindly ask what octane of fuel is available to you from where you are so, I can advice you on what you need to do to atleast meet your requirements? As close as possible.

[@medakabox2015]

@@JWorldAdventures octane should be RON95 but I have my doubts as they mix other stuff that blocks your engine fuel lines

[@ev.collinsokinyi5769]

is the IG-FE fuel economical?

[@JWorldAdventures]

Yes! It's very fuel economical. Thank you for the question.

[@bikerpeople548]

I just purchased a Cressida, only for the engine. The starter is missing. I have this number: 28100-15040 Its a gear reduction type, that seems to match up with an 80's Corolla. Can anyone advise please? Corolla is 400 each cylinder, and 1G 333. So going by that, a Corolla starter, as long as it fits, should work.

[@JWorldAdventures]

It's should work as most starters from that time period are interchangeable with one another. I hope I was able to help you out. And if you can't find 28100-15040 I suggest getting 28100-15070 as that was the new part number for the application. And 28100-15040 has long been discontinued.

[@bikerpeople548]

@@JWorldAdventures Thank you.

[@remi_ndz]

Where did you found all your informations ?

[@JWorldAdventures]

Hello there! I've got my information from old publications and car magazines from Japan of the era.

[@remi_ndz]

@@JWorldAdventures oh thats cool, thanks for the reply ;)

[@maxwellshana]

Whats ia the life span of the 1g FE ..?? The engine used in Toyota altezza..?

[@JWorldAdventures]

Hello and thank you for the question. Regarding your question, provided that it is serviced well it should last upto 250k kms before needing a rebuild.

[@capitalismnfreedom3084]

@@JWorldAdventures250k km isn’t much on these, even if relatively neglected. Mine has close to 350k now. Only problem are seals but theyre relatively easy to repair. Your transmission is likely to go out before the engine 😂

[@KoopaXross]

Does the 1G-GTE have the head gasket issue the 7M has or some other type of factory defect?

[@JWorldAdventures]

The 1G-GTE does not suffer from head gasket issues. But rather just keeping up with regular upkeep and maintenance should allow you to enjoy your 1G-GTE for many miles to come.

[@KoopaXross]

@@JWorldAdventures Great, thanks

[@DrOpPsHoTtEd]

​@@KoopaXrossit actually has a lack of oil flow to the rear cylinders. Look up the 6boost list of 1g mods on the old forums

[@JoshmiahMorris]

I want to learn more

[@JWorldAdventures]

Thank you for the kind words!! What would you like to learn more about??

[@robinsjouw1527]

Do you have more info on the 1gfe with itb’s of your friend?

[@JWorldAdventures]

What information are you looking for by any chance?

[@robinsjouw1527]

What itbs are that and how dus hè make the manifold. Stand Alone ecu?

[@JWorldAdventures]

@@robinsjouw1527 The manifold is custom fabricated and the itbs are from the S38. And the ecu is motec.

[@irvingluiscolomamerlino6748]

Hey my brother i will like to know more of the 1GGEU im putting it on a ke70,82 im rebuilding the hole engine but i need all the info u can give me thanks 🙏

[@JWorldAdventures]

Hello there friend!! I also saw your message on my Instagram page. Please do let me know what info you need, and I'll do my best to answer them. Have a good one👍👍👍

[@EfrainFavelaJr]

Anyone know if I can bolt on or how to install a r154 to 1g-fe

[@HeartLessGem_]

Ur best chances are to go to a wreckers and pull some transmissions to figure out which ones bolt on, swap some bits n pieces, forums would be a awesome help also

[@AnthonyKabwe]

I need this type of the engine

[@mwapemuluwe4864]

Nice kindly share more on the possibility of turbo charging the 1gfe beams 2000

[@JWorldAdventures]

Thank you for the kind words. In terms of the beams 1GFE, there should be no problems turbocharging it but you should limit your power goal to around 300HP for durability and reliability sake.

[@mwapemuluwe4864]

@@JWorldAdventures thank you do i need to change the stock internals

[@JWorldAdventures]

@@mwapemuluwe4864 The stock internals are good enough to handle 300HP but for extra peace of mind, I highly suggest upgrading the connecting rods and pistons.