Lexus isf rr racing ultimate damper + alloy pulley's. Removal and installation step by step

full step by step how to.belt diagram is show + pointers ... enjoy....thanks don't forget to like and subscribe.

[@2ZZGE100]

I got it installed on my RCF and wow! What an amazing mod. I agree it is one of my most favorite mods. It makes the engine feel like there is no inertia. Spins up like nothing. Cheers!

[@samiboost404]

I agree 100%

[@gabeh7373]

Thanks for the video! I attached it in the Club Lexus ISF forum under the "Lightweight Crank Pulley for the 2UR-GSE" thread I started😎

[@samiboost404]

Great.... Thank you

[@lavazza8031]

Elle fait le meme poid ?

[@dejanzelenovic3751]

I just changed mine but I did it from the top and it was super easy. Remove your intake and that white coolant container and you have full access. 30 minutes for everything.

[@samiboost404]

👍

[@2ZZGE100]

Thanks for the video. Will be putting this on my RCF in 2 weeks. Hopefully, it will go smoothly

[@samiboost404]

👍

[@vortex_gaming8089]

Would you recommend this upgrade for daily driving or stay OEM?

[@samiboost404]

Yes..it's a better damper...no negativity just positive....I do recommend for daily.enjoy....hope these videos help on your journey with a special car...like and subscribe 👍tks...

[@ap50]

Hey bro great video and helpful! Any downsides to this mod? Really considering it but worried about reliability issues. What are your thoughts?

[@errolrice9405]

I have it on my ISF, been driving on it for at least 18k miles, it really is a great mod. Haven’t had any issues so far.

[@ap50]

@@errolrice9405amazing! Is a tune still needed if have this since it increases throttle response? Any tuner u recommend ? Thank you!

[@errolrice9405]

@@ap50 no a tune isn’t needed for just the pulley and dampener change. It even uses the stock belt.

[@samiboost404]

It's a great mod .. quality part..no regrets...ive install 4 of them in customer cars..they all work as advertised...like 👍and subscribe and thank you

[@ozmo69]

They really need to make this for IS350

[@samiboost404]

Hi...Call Rafi or Simon at rr-racing...show interest in it ..they may..tks for supporting my channel the subs and likes 👍 help tks

[@J-Finelli231]

@@samiboost404 The 2GR pulley is already small and lightweight. It wouldn't benefit from a revised one.

[@samiboost404]

@@J-Finelli231 thank you for the info.

[@GarkModdard]

Hey so the woodruf key when you first showed it looked level. How did you get it angled to slide the dampener on?

[@samiboost404]

Hello..You can lightly tap it with a mallet..it moves easily when it's lubed a..bit ..

[@ISdragon500]

Did you use the recommend loctite 660?

[@samiboost404]

Yes I did..

[@1320Isf]

Feel any gains? I know this should help tremendously

[@samiboost404]

Yes..it definitely picks up speed faster and a bit more wheel spin..will test it at the track when I get a chance..

[@1320Isf]

@@samiboost404 hopefully enough for you to crank into the 11’s 🙌

[@samiboost404]

@@1320Isf yes...I think 11s were doable before the pulleys..just needed a few passes in test and tune .in index 12 competition it's more about consistency..but yes 12.0 11.9 I'm hoping..

[@lambr0063]

Did you do any testing after? How do you like it?

[@samiboost404]

Yes Dragy test was .1 tenths average faster to 60

[@samiboost404]

I think its a truely good mod for the f it works...

[@lambr0063]

@@samiboost404nice write up, going to install soon

[@marineyacht]

How is the water temp. After using your F by a while❓ my set are on the way by USPS.

[@samiboost404]

Good question..I haven't noticed any changes in temps..but will be testing it in when it gets warmer..you will definitely enjoy this mod... don't hesitate to ask install questions or check the video.. many pointers thr that will help.. enjoy the boost in acceleration..👍and thank you for the support with subs and 👍likes..

[@marineyacht]

Thank you.

[@stopdrpnro]

Any updates on temps?

[@samiboost404]

I haven't noticed any difference..I'm sure thr is a small amount but not enough to be a concern..190-200 is the range depending on driving..

[@stopdrpnro]

@@samiboost404 thanks for the video and update. My set should be here Monday.

[@wil3159]

any added noise or vibrations ?

[@samiboost404]

Sup bro ...Non what so ever ..no funny stuff ..like stock..just the extra performance.

[@wil3159]

@@samiboost404 awesome. Looking at this for my IS500

[@samiboost404]

@@wil3159 it's a great damper ..been proven with the supercharged f's for a while + 6 pounds saving of spinning weight.

[@sebdul]

Your 60-130mph is better ?

[@samiboost404]

Hi..I haven't checked...but my 0-60 improved

[@sebdul]

@@samiboost404 Do you feel more power in 3rd gear ?

[@samiboost404]

Yes..will spin a bit more when you 1st hit it in 3rd.

[@Floperatorreaper]

Any mpg difference?

[@samiboost404]

Hi..I haven't seen any difference or tested for it .