LG Dryer Repair - Very Loud Noise When Running - Drum Supports

[@johnpeterman132]

Dude. 10 years later and you saved me. This 12 year old dryer lives on 💪

[@TheJsEst2003]

My dryer is going on 10 years… what did it cost to fix? Cost of rollers? Thank you

[@Keri-Kerigan]

Awesome video! You just saved my Dryer. Got the parts off Amazon, and followed your instructions exactly. Replaced both wheels, and the dryer purrs. Also cleaned out the equivalent of two dead cats worth of Lint and fuzz

[@TheJsEst2003]

Do you have links to the items you purchased? I’d love to use them. Thank you.

[@gtdoering4630]

While this may be an old video, it is still very useful. I would never have attempted this relatively simple repair without seeing the steps outlined in the video. Thanks very much.

[@darioecheverri1607]

Thanks for the video very educational the only thing i think is missing is for you to turn the dryer back on to show us what the outcome was, i was really expecting to hear a nice smooth sound.

[@Thunderdrumz]

I can't believe I sat through that video and you did not even test the unit after repair. Were you afraid to turn it on and find out the back rollers were bad too? Geez.

[@WayneDeBord]

Great video, but I'm with you there--was waiting for him to turn it on so we could hear it was now silent. Still, good job.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@brianpgraves]

Saved me from using an expensive repair call just to get rid of a loud noise. Thank you! 😊

[@adamcoulombe3140]

I lol’d when the screwdriver looked like it’s screwing his butt. Thanks for the vid!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@deenacolclasure9044]

So did I... Lol

[@dkcarter3595]

Very informative and easy to follow instructions, Thanks again. I too was waiting for the grand finally, hearing the dryer run smoothly

[@tdogmom6128]

Me too I was bummed. Lol

[@MikeZimmermanOfficial]

Probably could have placed that screwdriver graphic somewhere else but otherwise great video... thanks.

[@ericdage]

Thank you for this video. I just fixed my dryer following it. You are part of what makes the internet great!

[@Appliancevideo]

Fantastic! Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@rogershields6217]

This is a fantastic video. Saved me several hundred dollars on a service call to do something that wasn't really that hard to do. Follow him step by step. When you turn the drum you can hear the bad roller and when you take the front off you can see that the roller was totally worn out. The back rollers looked good from a visual inspection and I am glad I didn't have to tackle them.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@bcspoon]

Thank you very much for this video. After watching it, I took of the top and front of my dryer and checked the rollers and one of them had serious issues. I ordered a replacement roller online, and replaced it today without any problems. Good as new and I did it!!! . Thank you again.

[@Appliancevideo]

+bcspoon Thanks for your positive comment. We have helped millions of people repair their own appliances. Please help us produce more videos to our site by subscribing to our KZbin page, or posting our website www.appliancevideo.com/ on your Facebook or Twitter account.

[@Order-in-Chaos]

You didn't record the best part, the final noise test 😄 Great job. Thank you.

[@deenugent473]

Yeh I was waiting for that too 😊

[@jordanjeans-humberviewss2463]

@@deenugent473 Same here!

[@deenugent473]

@@jordanjeans-humberviewss2463 I actually fixed mine after watching the video and it sounded so smoooth 😁

[@ItsRBCH]

I was actually waiting for that part too 😂

[@thenagdafamily5289]

Thank you for posting, I was able to fix our LG Tromm dryer which was making very loud rattling noise by following your instructions. I ordered the parts from Amazon.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@carolshaffer6627]

Wondering how you knew by looking at the roller that it was shot? What do we look for? Bad ones looked like new ones in video!

[@brianfontaine6625]

Maybe a bald or flat spot on it???

[@margienjohnson4232]

12/3/2016 -this youtube post was heaven sent, loved the spunds provided, my daughter detected immediately what we need to do. with both of us being educators , the segment on blower noise hit the spot. pens, pencils, coins, earrings, were among the items removed. thanks for posting.

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@tmullins845]

How did you to determine the back roller were okay? What are we suppose to look for when inspecting the rollers?

[@Appliancevideo]

That is a question for our Repair Help section at ApplianceVideo.com.

[@jcccforever6705]

Timeless Vid just fixed mine with Identical issue easy peezey Thanks Bro!

[@fernsolo]

Excellent video, I happened to have the exact same dryer, I bought two rollers on ebay for 17.00, the service call would have been 85.00 plus whatever extra to replace the rollers, with this video it was a lot easier than I expected.

[@rickbelanger3423]

where did you order the rollers please?

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@robertlevesque8871]

This worked for my dryer. Appreciate you filming this!!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@COOLARROW77]

The first time the animated screwdriver showed on the screen...... looked pretty funny! lol

[@Appliancevideo]

Thank you for your resonce . Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@COOLARROW77]

What is a Resonce?

[@gregbgregb8487]

@@COOLARROW77 lol

[@jaimerivera6435]

They could have out that screw driver ANYWHERE but CHOSE there lol

[@bikes7777]

Not disconnecting the power seems VERY dangerous. Why not just take the extra 2 minutes and pull the dryer out properly?

[@Appliancevideo]

bikephil The unit it unplugged while doing this repair. It has to be for the control harness to be hanging. We assume everyone will unplug the unit before staring this repair. I have also added in a font to unplug unit before starting this repair. We normally have this on all of our videos, The editor must have missed it, thanks for bringing it to our attention. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZbin, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

[@josephfrigo510]

***** I unplug the unit from the inside sometimes. Pulling power from the connection at the cord. Easy to do and pretty safe. I also have used the breakers for stacked units when working on the dryer, while not unstacking.

[@Appliancevideo]

Joseph Thanks for your input. We allays take advice to make our videos better for the end consumer. People like you have helped us make many changes over the last three years. With over 700,000 views a month to our videos we want any advice we can get to make them better for the end consumer. Thanks Again Matt Ace technician

[@lynnnewport1155]

Superb video giving step by step repair procedure for an LG dryer. Clear and easy to follow.

[@Appliancevideo]

+Lynn Newport Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. We have helped millions of people repair their own appliances so please help us produce more videos to our site by subscribing to our KZbin page, or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

[@1964Gymrat]

Great video, the step by step instructions were right on the money. Thanks for posting it

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@uteute6870]

Great video showed me how to break it down and repair my rollers my roller broke off in the back. I replaced all four. With the belt and a heating element. Very simple watch there videos very good

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page

[@jsunwalters]

I used this today to fix my dryer, thanks so much!!

[@Sugarchere]

Where did you buy the replacement rollers? Did you have to know the serial number of the dryer in order to purchase? Thx

[@vrfuturessiny4056]

Dude! U didn't turn it back on after finishing. I watched this whole video waiting to hear the noise fixed! Well thanks anyways. Think I figured out my noisy dryer problem.

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@josevega6190]

Totally agree

[@jayspencer498]

@@Appliancevideo no way. The video is incomplete. You proved you could change parts. You didn’t prove on camera that the issue was resolved. Bad, bad, bad!!

[@ericmartin2747]

Thanks for the video, I was able to change my drum rollers!!!

[@veronicarueckert6323]

Thanks, I'm going to try this on mine, it's stacked and I don't feel like unstacking it so I will use ladder. Fingers crossed!

[@derwood6]

This video just saved me a service call. Thank you!

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@socoquito45]

Thank you so much! My grandson and I were able to fix our dryer with your instructions!!!

[@brianfontaine6625]

I'm guessing it's rarely a belt issue but usually a roller issue

[@vrpinky22]

Because you you I got my LG washer fixed thank you man.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@tdogmom6128]

I’ll be doing mine today looks fun🙈. Did it really take you less than 20 minutes

[@kristiniacono6732]

How did you determine the rollers are 'bad' and not simply 'loose'? Thanks for your free vids!

[@Appliancevideo]

Kristin Iacono All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section with over 1000 questions & answers. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at www.appliancevideo.com/premium-membership/. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

[@denimru4637]

How do you determine what rollers or belt needs to be replaced?

[@jamn99999]

Just an additional tip - make sure to reconnect the power cable to the door sensor before screwing the control panel back in place.

[@Appliancevideo]

Thank you for your positive response, we will add in font to reconnect the power cable to the door sensor. Thank you for the tip as we allays strive to make our video's better. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@patsybass5705]

Very good video except I wanted to hear it run after completion of repair and you didn't turn it on. How do we know it worked?

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@mrbluesky7277]

Just turn the circuit breaker off. You don't have to unplug the dryer. It should be a 2 pole, 30 amp breaker in your panel. Turn it off if marked, and see if your dryer comes on, if it doesn't, then that wasn't the dryer. Most likely one of the AC units, flip the other 2 pole, 30 amp breaker off, if your dryer doesn't turn on, that's the one. Mark it, tag it out, and proceed with your repair. It makes things a whole lot easier than pulling your dryer away from the wall in order to open it up.

[@piotrl.pawlak7851]

Another video with a problem, but without diagnosis... Why didn't you show what the noise was?

[@Appliancevideo]

Piotr All of our videos are real time issues in the home. They are called on the road videos. We try to tape the noise when we can on the in home videos. Sometimes we have issues with technicians time, space, dogs barking ,customers talking and asking questions while taping. Its very difficult but we have managed to produce over 1,200 FREE videos and we help 600,000 people every month fix their appliances. We are always trying to improve the OTR videos. Please help us provide more videos to our site by posting ApplianceVideo.com on your KZbin, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

[@looneyluna863]

GREAT VIDEO!! My favorite parts were all the parts when the virtual screwdriver was screwing him the ass 😂😂😂

[@tinkpartlow5160]

Video is great right until the end watch the whole thing and then needed to show it working but didn't

[@sarahloza9376]

Hopefully I am not the only one who has gotten the screws mixed up after you take it apart… is there a way to find what screws go where ? I have the model dlex8100V and have not been successful finding anything on line

[@kristiandiaz6362]

Great video with a bad ending. Put machine in motion so we can hear it.

[@jamn99999]

By the way...excellent video. It's great when you can fix things yourself!

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 1-million people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@jennyyu6044]

Thank you for posting this great video.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@themax4677]

I'm likely looking at same job. Same noise different LG model. I assume I might as well just buy a full set of rollers? Dryer is around 14 years old at this point. DLE0442W

[@deenugent473]

Great video, thank you!

[@mariopradojrPB]

Thanks a million for this!!!!!!!!!!!!

[@jonathonbraunace5876]

That dissolve from unsnapping the control panel from the frame at the beginning to lifting it up and out of the way before doing anything else is doing a lot of heavy lifting. It may be the most challenging part!! No wonder you skipped it 😅

[@tombrown6329]

Agree about the control panel from the frame....also, there are 3 plugs to the electrical items in the control panel...all unique. Would be easy to just unplug those and set the control panel aside. Safer too!

[@bigmomma78737]

How can you tell the rollers are bad? I'm having the same problem. From the video, I cannot see anything wrong with the rollers.

[@gregbgregb8487]

Could be your pulley

[@stainless0521]

Exactly. He doesn't say OR show!!!!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@saltwaterdrew]

You guys are awesome. Thanks for the video!

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel. Or support our parts department at 1-800-830-5465 and our website www.SaveMoreOnparts.com . This is the only way we can continue to help the over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@hipsi337]

What about the rear drum support rollers they are the most common to go bad.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@eastender74]

Great Question! If we at Appliance Video really gave a dam we’d answer that question but just for your trouble here is a generic reply. 😅

[@nathaliaseabra8204]

Hi. Great video, but how to replace back rollers? Thanks

[@Appliancevideo]

Great question, with our technicians now getting hundreds questions weekly, they are answering all questions at our website at ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes.

[@dirtymind1977]

Awesome video, exactly what we needed to fix ours, thank you for the effort and video, came in very handy! :))))

[@Appliancevideo]

John Glad it was exactly what you were looking for. Thanks for your positive comment. Please help us provide more videos to our site by subscribing to our KZbin page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.

[@SmokingSpoon]

1:14 >_> ; Awesome video, thank you! That obnoxious sound when the machine turns on though haha

[@Appliancevideo]

Glad you enjoyed! Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@frankgeary7574]

Now when I put the drum roll back on it doesn’t sit up properly on the new rear wheels. Please help!

[@lingitgirl]

I was at your webpage. I could not find a vid for a GE Dryer spacemaker. It is making loud noises. And I would like to watch a vid on how to take it apart! Do you have that specific vid? Tx!

[@Appliancevideo]

lingitgirl If its not searchable by our website we haven't made one yet. send me your model number and I will send you the parts breakdown sheet on how it comes apart. Matt

[@lingitgirl]

***** Ok thank you!! The Model # is WSM2700WAWWW, IDK if you need a serial # T2601341W

[@TheJsEst2003]

Three screws on the front of the dryer just won’t budge and are getting stripped. Any suggestions? All others cage off fine .

[@TheJsEst2003]

*came off fine

[@Toronto_downtown]

I couldn;'t see much wear on the roller , is it the internal bearing that goes bad? I might have to do this on a much smaller LG dryer DLEC855. I guess I may as well just replace all the rollers and belts ..I have had the dryer for 5 years .....thoughts?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@joegalen9264]

You didnt show how to replace the rear rollers!

[@jamescoffelt4933]

Thanks!

[@Appliancevideo]

Glad we can help! Thank you so much for your support!

[@oscarfarley4104]

There are plastic tabs that have to be squeezed when removing the panel. And NEVER do this until hitting the breaker. Also, it would be helpful to use the camera to show what you are actually doing

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@annmariefisher7016]

Is it possible that a piece of clothing could have been stuck in it.....? This just happened to me and I think it's because I forgot to put the thing that catches all the lint and before I started the dryer.

[@Appliancevideo]

Annmarie All of our technicians are now answering questions daily on the ApplianceVideo.com website. You can search completely FREE in our Repair Help section with over 1000 questions & answers. Or you can get unlimited technical advice and video links emailed to you by our 14 factory certified technicians at www.appliancevideo.com/premium-membership/. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks for your support. Matt Ace Appliance factory service technician.

[@tanisherwood3128]

I just did that yesterday and today I have a problem

[@rugfixr]

What was the charge to the customer? And why not clean the lint out of the parts before reassembly?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@hamidford7415]

Excellent video. Save me $100s. Thank you.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@NeedForSpeed.2004]

I figured this would be for if the dryer is making a loud vibrating noise because of lint, not a disintegrating part.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@sethblack40]

Great vid! Thanx

[@Appliancevideo]

william shepley Thanks for your positive comment. We are glad we could help resolve your issue and hopefully saved you money. Please help us provide more videos to our site by subscribing to our KZbin page or posting our www.appliancevideo.com/ website on your Facebook or Twitter account. Our factory authorized technician’s also daily provide free professional Repair Help to people like you to help solve their appliance problems. You also have the option to email a factory service technician with a question at www.appliancevideo.com/repair-help/ . If you need of parts for your major appliance, we have over 5-million parts in stock at savemoreonparts.com/ . Thanks in advance for supporting us. So email us if you have any other questions our videos cannot resolve. Thanks for your support in advance. Matt, Ace Appliance service technician.

[@ricklinde9147]

Amazed at not disconnecting the power. I would have flipped off the breaker. Obviously, an unnecessary precaution.

[@herlindamachado4340]

Do you need those plastic triangle thing in when putting the wheel on?

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@grumpy3543]

Damn. I wanted to hear the dryer after to see if that fixed it.

[@randyswiech7884]

Replacing the front rollers is easy but the back rollers is my issue. Not sure how to remove the back panel to get to those

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@moodberry]

What about replacing the read rollers?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@bilaltofeq2850]

mine is know and start to make noise when it spin ? do not know what to do what the problem, mine combo.

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 3,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@willwitt1020]

I have one that was seized up in the bottom back the friction has made it flat (I didn't notice until I freed the bearing ) ... I started it up and it now wobbles . It looks like you have to remove the back panel but its riveted... What do I do ?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 10,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@leroyfarmer]

I found that I have one roller with a flatten section. Is it a good idea to replace all the wheels if one is bad?

[@Appliancevideo]

Leroy Our technicians replace all of them at one time. Especially if the unit is over one year old. . Please help us provide more videos to our site by posting ApplianceVideo.com on your KZbin, Facebook or Twitter account or add us to your circles. If you are in need of any parts please support our parts department on line at savemoreonparts.com/ or call 1-800-830-5465 7-days a week until 11pm Eastern time. Thanks again your support. Matt, Ace Appliance service technician.

[@candypimp87]

Where did u get the rollers and how much

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@billr4677]

Couldn’t you just pull that triangle clip off and remove the wheel. The issue was the bearing in the wheel I’m assuming?

[@gloriagonzales8731]

What’s the main cause for the rollers to make that noise in the first place?

[@Appliancevideo]

Great question, they just were out over time like brakes on a car. If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

[@johnholder6195]

I have an issue with the same model LG Dryer - After powering on the dryer, the CLEAN FILTER light continues to blink and the drum doesn't rotate after pressing START. All that can be heard are three clicks at the front panel. I've unplugged the machine to no avail. HELP!!!!

[@Appliancevideo]

Great question, you can call our parts department at 1-800-830-5465 and they can give you help 6-days A week Mon-Sat . If you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. We have over 4,000 common questions and answers that you can easily search through by your model number, appliance make, and problem or error codes, and It’s free to search through our question & answer library.

[@gordonfuentes808]

Bruh u make it 👀 sooo ezpz Mahaloz foda video save mee alot of $$$$$ Alooooooooha 🤙🏽😎🏝

[@WayneDeBord]

Wonderful and helpful video; thanks very much. Did that CGI Philips screwdriver hurt when it punctured your glute? LOL!

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@davidhyre632]

grate job.

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,700 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@PKAAAAC777]

So how come we didn't hear the dryer before and after?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 13,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@natew48]

anyone notice they made the screwdriver go up his butt at one point and it was turning, like it was loosening up his butthole? very helpful video also. 😀

[@Appliancevideo]

Thank you for your positive response, we are glad we could help. Please help us by subscribing to our KZbin channel or post our website www.ApplianceVideo.com on your Facebook page. We want to let your friends & family know how our FREE videos can help them. Or you can support our parts department at 1-800-830-5465 and our parts website www.SaveMoreOnparts.com . This is the only way we can continue to post free videos and help over 900,000 people per month like you repair their own appliances. We also have thousands of more quality videos on all major appliances made by our factory trained technicians at www.ApplianceVideo.com .

[@kraybrother8768]

Nate Willinger 😂😂😂😂

[@warpspeed1988]

Yeah I was drinking my coffee while watching this. Just about flooded the keyboard when I saw that animation running! LOL!!

[@stovar1182]

LOL

[@quangnguyen2269]

Thanks

[@Appliancevideo]

Thanks for your response, we are glad we could help. Our library of over 5,900 videos are currently helping over 1.6 million people like you every MONTH. Please help us by subscribing to our KZbin channel, or post our website www.ApplianceVideo.com to your Facebook page, Twitter, Instagram or any other social media sites. Your support will help us keep producing more free quality videos.

[@bartseller8601]

Okay so I don't get this. First of all if the rollers were defective we should have seen something visual or something indicating the flaw within the rollers themselves. Never saw that. Just saw him swap out the rollers. And then at the end of the video he didn't turn it on showing that this is the corrective measure. What's up with that?

[@76Hawkeyes]

Stupid question...Are the 2 rollers the same part number?

[@Appliancevideo]

+michael brobston Yes they are...

[@76Hawkeyes]

Thank you very much. :)

[@JohnLee-ed8yi]

Please disconnect the wire connectors and set aside the front control panel!

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@lachika8005]

Mine is just installed and sounds the same!!!

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@wsalinas1]

Why , you did only ½ Job..? You change only ½ Bearings , in front. You must to change in Front & Back...? How do you recognize the bad bearing..?

[@Appliancevideo]

We take every circumstance and repair based on what the customer wants and can afford. The back bearing was not making any noise and the customer was on a very tight budget. Its been over 18 months and still working great we were just there to fix her ice maker and double checked the dryer.

[@wsalinas1]

Thanks my friend...! I ve questioned this, because others change all the bearings..!

[@lingitgirl]

So basically the noise came from rollers that needed to be replaced?

[@Appliancevideo]

Yes , the roller bearings were worn and needed replacement, causing the noise. Please help us provide more videos to our site by subscribing to our KZbin page or posting ApplianceVideo.com site on your Facebook or Twitter account. We also have our factory authorized technician’s email daily free professional advice to people like you to help solve their appliance problems. Thanks in advance for supporting us. Matt, Ace Appliance service technician.

[@lingitgirl]

I just found out from a parts place that my GE Space saver dryer may need bearing or gliders.....so basically have to take it apart to find out which needs to be replaced......

[@Appliancevideo]

lingitgirl Yes correct.

[@lingitgirl]

I have been looking for a specific vid for the space saver GE stackable 27 in, and cannot find one. I only find vids for the larger regular size dryer. Is there one for the stackable?!! If can you post it so I can take my dryer apart? Thank you!

[@Appliancevideo]

lingitgirl If you go to our FREE repair help website at ApplianceVideo.com with over 2600 free repair videos. You can search for your video by symptom, make and model. We have 14 factory authorized technicians that will answer any technical questions daily on your appliance issues. This is the only website on the web that you can get questions answered by certified appliance and HVAC technicians at absolutely no charge . Thanks Matt Ace Appliance factory service technician

[@gailramsay7043]

Mine is brand new, first time on makes loud noise

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@samjone1]

You missed the two rollers at the rear of the drum! Why not replace those while your at it. You might have to come back for another service call to replace those too. duh...

[@Mudcat597]

👍👍

[@vskhat]

what about two back rollers? replacing just fronts is a hack job.

[@jeagr209]

Why didn't you let us hear the noise being gone?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Monday -Sunday, or search at www.SaveMoreOnParts.com 24 hours 7- days A week.

[@ajbuffalo1129]

Exact noise

[@ko6128]

Next vid: how to repair your dryer when you fry motherboard by not removing power during previous repair.

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, you can search our over 17,000 answered questions free at our website www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week ,or search at www.SaveMoreOnParts.com .

[@Greg-li4tw]

You didn't run it broken so we could here the broken sound. Also didn't run it fixed to hear the difference!

[@joegarza3445]

ISN'T THAT POWER DRILL A LITTLE EXCESSIVE ?

[@Appliancevideo]

Great question, if you have a more technical question that our parts department cannot answer, our technicians are answering all questions at our website at www.ApplianceVideo.com under our Repair Help section. You can also call our parts department at 1-800-830-5465 and they can give you help 7-days A week Mon-Sat . You can also search at www.SaveMoreOnParts.com 7- days a week.

[@WayneDeBord]

Nope, an adjustable impact driver is by far the best way to remove/install the screws with no risk of stripping them out.

[@alifoxx13]

Take into account how many screws they turn on a daily basis. All that manual repetitive motion could contribute to tendinitis and/or carpel tunnel.

[@cbrown5299]

somebody need to take that impact . poor screws !!!

[@PimptatoPCs]

I always use a cheap Harbor Freight electric screwdriver for jobs like this. Enough power to remove and replace screws, but not enough to damage anything.