LG Front Load Washer Motherboard Repair

In this video, I repair an LG washing machine direct drive inverter washing machine PCB/motherboard.
******************************************************************************
Products You Might Be Interested in buying and sharing with your friends. Thanks!
Multimeters
NEOTECK Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dml...
ANENG Q1 Digital Multimeter ➡️ s.click.aliexpress.com/e/_DeU...
Digital Pen Multimeter ➡️s.click.aliexpress.com/e/_DkM...
Rechargeable Smart Multimeter ➡️s.click.aliexpress.com/e/_DDm...
UNI-T UT181A True RMS Auto Range Multimeter ➡️ s.click.aliexpress.com/e/_DFL...
ANENG 616 Large Screen Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dln...
TOOLTOP ET8135 True RMS Multimeter ➡️s.click.aliexpress.com/e/_DB8...
MASTECH MS8910 Digital Multimeter ➡️ s.click.aliexpress.com/e/_Ded...
ZOYI ZT-X Digital Multimeter ➡️ s.click.aliexpress.com/e/_Dd9...
ANENG Q1 Digital Multimeter 9999 Analog Tester ➡️ s.click.aliexpress.com/e/_DEz...
Thermal Camera
UNI-T UTI260B HD 256X192 Thermal Camera ➡️ s.click.aliexpress.com/e/_Deo...
TOOLTOP ET692Cl Thermal Imaging Camera ➡️ s.click.aliexpress.com/e/_Dm0...
Mileseey TR120E Infrared Thermal Imager ➡️ s.click.aliexpress.com/e/_Dej...
Fluke TiS55+ Thermal Camera 9HZ ➡️ s.click.aliexpress.com/e/_DCO...
Noyafa NF 522 523 Handheld Infrared Thermal ➡️ s.click.aliexpress.com/e/_DCe...
TOOLTOP T7 256*192 Android Thermal Imager ➡️ s.click.aliexpress.com/e/_DmB...
Soldering Wires
10Pcs 2mm XZZ-2015 Desoldering ➡️ s.click.aliexpress.com/e/_Dkg...
0.8mm/1.0mm 50g Lead-Free Solder➡️ s.click.aliexpress.com/e/_DDn...
0.6/0.8mm 50g/100g Lead Free Solder➡️ s.click.aliexpress.com/e/_DDC...
200g 500g Tin Wire Soldering Wire ➡️ s.click.aliexpress.com/e/_DdQ...
8g 50g Per Roll High Purity Soldering Wire➡️ s.click.aliexpress.com/e/_DCm...
250m/roll 30AWG UL1423 Insulation Cable Copper➡️ s.click.aliexpress.com/e/_Deu...
Vacuum Pump
18V Lithium Battery Vacuum Pump ➡️ s.click.aliexpress.com/e/_DDK...
VEVOR 2.5CFM Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkT...
Refrigerant Vacuum Pump ➡️ s.click.aliexpress.com/e/_DkH...
VEVOR 1.8-4.8CFM Refrigerant Vacuum Pump➡️ s.click.aliexpress.com/e/_DeA...
Mani Fold Gauge
Digital Manifolds Refrigerant Gauge ➡️ s.click.aliexpress.com/e/_DC3...
R410A R22 R134a R404A Manifold Gauge ➡️ s.click.aliexpress.com/e/_DeB...
Refrigerant pressure gauge ➡️ s.click.aliexpress.com/e/_Ddg...
500/800PSI Refrigerant Manometer ➡️ s.click.aliexpress.com/e/_Dne...
HONGSEN HS-330 Refrigeration Vacuum ➡️ s.click.aliexpress.com/e/_DBi...
Air Condition Gauge Manifold ➡️ s.click.aliexpress.com/e/_DFu...
MRCARTOOL L202 Air Conditioner ➡️ s.click.aliexpress.com/e/_Dkg...
Soldering stations
RF4-H2 Automatic Sleep SMD ➡️ s.click.aliexpress.com/e/_DBa...
JCD 2 in 1 Soldering Station LCD Digital Display➡️ s.click.aliexpress.com/e/_DFz...
GVDA New Soldering Station ➡️s.click.aliexpress.com/e/_DDc...
JCD 8586 Soldering Station 2 In 1 Digital➡️ s.click.aliexpress.com/e/_DBX...
******************************************************************************
Subscribe to The Channel 👉 bit.ly/3vNT7s3
Social Links
Facebook 👉 / forevertech3
Instagram 👉 / forever_tech1
Twitter 👉 / forevertech3
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for 'Fair Use
for purposes such as criticism, comment, news reporting, teaching, scholarship, and research,
Fair use is a permitted by copyright statute that might otherwise be infringing,
Non-profit, educational, or personal use tips the balance in favor of fair use
#washer #lg #motherboard #repair #tech #pcb

[@stephenmergner]

Excellent video. You earned a subscriber with this one! The English translation is spot on and I really appreciate your honesty about what you discovered and taking us step by step through the diagnostic process. I admire your skill and will continue to work at mine by using videos such as this one!

[@fillo1971]

Grande spiegazione 💯👍🏻

[@rolanddejesus8685]

thanks sir for a very informative video,God bless.

[@charlesmawale9114]

Can't imagine how to put the protective plastic back.. nice work

[@johnmirajkar]

Good informative video👍

[@ckye736]

We leveled ours and it is working at the lightest touch like new. Installation was done incorrectly. Before you call someone do the ThinQ as we did. It helps to diagnose problems. You for sure know it’s not the expensive parts, which the people who looked at it wanted to replace.

[@minnesota-boston9620]

It is like as a detective. Good job.

[@forevertechenglish]

Thanks bro!!

[@iontrandafir5762]

Thank you very much for the video ! You helped me a lot, by not letting me buy such a LG crap. I want that thing as simple and straight forward as possible , not overcomplicated with bells and whistles. . The old washing machines uses a mecanichal program switcher , not that electronic crap, wich corode .

[@tesfaye9703]

So interesting thankou

[@forevertechenglish]

Thanks

[@JanuarWu]

very impressive... thank you for sharing, my washing machine mainboard was similar with that one on the video, the problem is a little bit different, it keep turning off again every time we push the power on button and we could hear tick sound maybe from the relay similar sound like on the video, it only turn on for several second with normal sound when we turn on the washing machine then it will turn off again, do you have any idea which part should be inspected?

[@eng.thirup]

my washer pcb seems same as you in the video

[@jagadeesan1234]

super sir

[@forevertechenglish]

Thanks

[@dh2032]

Hi *Forever Tech English*, This video is the closed I come to finding, solution, to LG Washer & dryer - MODEL Number: WD-14331AD, from my investigating the model you used in the is a slightly later model with with the dry function, so the funder mantel's should be the same, the machine was working just find, until just failed, it was do it week, wash, set big centre dial, 40, set pre-wash, intensive, and Rinse+ and then it drop in the dryer, function, it went all the was with program to the end I think, (when I came back just before, I take the garments out, I like just do the low temp, set just warm the garments, the always very mildly damp to the torch, the doing that fixes that, and this was the first sign of a problem the machine would not wake up, (check the plug fuse - okay, stripped out the control button board just like the one your video, multi meter all the contacts to the switches, and assessable traces, from the switches, to the next component, all passed, when all over the main board like one in your video, it sealed just like yours, I was thinking doing something similar with drill, (but I like the way you did your board better) Im quite confinable with the doing soldiering if needed, the mains power that connect to, as soft button control, there ne real power point to probe, to see if this any power get to the board, I have all checked fuse on the board and that checks out okay, I been all over the main board with a big camera Len, and the only think stands out like the board in your Video It has a One big capacitor (the size) and one of the small more normal sized one right next to there floor or bubble sealant stuff, did the sniff test, there's a bit smell, but nothing strong, just old circuit board smell there no smell like something been on fire or something, I Okay with small electronic stuff, the big capacitor don't normal blow up or fail ever, and if the small fail, the top crack open, but there no signs of any of that going on,? was surprised by the rust under protective gel stuff, in your video is that a regual thing, I can not see any signs on the out side, I am stumped to what to do next?

[@ELGERGAWYMohamedAnwar]

تسلم...تحياتى لكم #الجرجاوى_جراح_الغسالات_الاتوماتيك

[@janaka5423]

Do you know if I can buy the PCB board? My model is F1296WDL24.

[@hajieok]

what is the value of the resistor that is located under the large resistor whose value is 220ohm near the black relay?

[@electrolatif]

Thank you again for charing your knowledge I have the same PCB board, but the resistance concrete with the line 220v burn, i dont know code color become all become black The resistance hide in with insulation What is the Resistance VLUE for it? !

[@forevertechenglish]

Well I don't have this board right now, Will have to check the my old data, whether I captured the photos or not, then I can help you out.

[@electrolatif]

@@forevertechenglish thank you very much 🙏 Appreciate

[@LifeIsshort935]

Bro I want this one please share the link

[@ahoorapersia4698]

Hello sir and thanks a lot. If power button doesn't turned off the machin, what is the problem?

[@forevertechenglish]

I have a video on it, on my channel

[@pemadorji8199]

Sir can help little bit, my auto washing machine are washer not working, directly spine wahat is problem?

[@faizansaeed7512]

Can you make video my LG direct drive front load washer mother board not giving output to the door lock switch

[@samuelogunsanya3602]

I need your help, Lg front loader showing dE, bypassed the door switch and checked the voltage on pin 1 and Pin 3...not reading 220, how do I trace the fault?

[@forevertechenglish]

I have videos about door switch on my channel you can visit my channel and watch those. Hope so those video will help you out in fixing the problem.

[@skywalker_0427]

So i replaced my pcb board.but i no longer have auto resume function after a power cut....how do i activate this?

[@eng.thirup]

I have the same power issue in my washer. switching IC is getting heat. is it faulty? if so what is the part no for replacing the switching ic Bro.

[@forevertechenglish]

If its heating up more than usual check its datasheet to found what is the max temperature for it

[@forevertechenglish]

Try to install the same number.

[@sylvestermaleselamalatsi1232]

I have the same one but its not starting/play its on pause mode

[@forevertechenglish]

kzbin.info/www/bejne/l6CkqZutebCpbqM Then check out this video I have solved the same issue you are saying. May be this could help you.

[@kristofs100]

Hello i have problem with the same PCB board. But resistor with cover on it gets burned.Washmashine works few hours when i change IT and Burn IT again its 220ohm 2w

[@forevertechenglish]

Check For any flucutation in the voltages, Check the main supply from the plug whether it is attached with the correct polartiy, Check for anything heating in the pcb board.

[@dbeat8885]

Please sir,which part of the PCB is responsible for sending Signal to the door lock?

[@dbeat8885]

My door lock is not receiving current

[@BhanwarSinghgaour]

My Machine is lg 5.5 lg trome looks same yours pc O compend but company man couldn't he told me ac moters supply senser doesn't work

[@Nomad2233]

The technician is saying pcb not working due to shock problem..and advising to change whole pcb board...pls help..wat will be the real problem

[@forevertechenglish]

If the washing machine is vibrating due to shock or dampers, why would he change the complete pcb board. I don't get it. Change the shock absorbers.

[@neethupa7228]

Hello how to solve mechine switch issue

[@forevertechenglish]

I already have I video on it, you can visit the playlist on my channel.

[@imokhan-th6fp]

Jab bol rhe ho to screen pr type krne ki kya need hai

[@BhanwarSinghgaour]

IE erre showing on my machine one small moter of water supply is working but next time taks water that moter doesn't work what is falt

[@forevertechenglish]

is it iE or LE

[@BhanwarSinghgaour]

​@@forevertechenglishIE errer

[@BhanwarSinghgaour]

​@@forevertechenglishos the relay is falt in pcb

[@BhanwarSinghgaour]

Engenier told me

[@forevertechenglish]

@@BhanwarSinghgaour let me check what this error means, then i will inform you