Lg update Fail on LG control board

[@dodgeram1500tn]

i got a lg refrigerator for 16 years and still running strong and never had a problem i love it

[@hansgruber2509]

My POS LG didn't make it 5 years, the Whirlpool it replaced was still running at 25 years

[@caseyfike226]

You're the only one

[@dodgeram1500tn]

@@caseyfike226 just don’t get Maytag or whirlpool you will be lucky get 2 years for the board to fail, had 2 dishwashers by Maytag to replace right after warranty is out, ge is pretty good got a washer and dryer still working lol

[@dodgeram1500tn]

Just stay away from maytag and whirlpool there trash, had two maytag dishwashers main boards go out right after the 1 year warranty went out and I got a friend bought a brand new whirlpool washer something. Ge is pretty good tho I got a washer and dryer still running good and there 11 years old. But all this new crap they build not going last anyways nomatter what brand it is just like new vehicles.

[@torresdelpaine8888]

I have a failed compressor on an LG LFX31945ST /06 refrigerator, which was manufactured in October of 2013. I am wanting to replace the compressor with the universal replacement, which requires the software update on the PCB. I read somewhere that PCB boards manufactured prior to 2014 may not accept software updates. Any ideas on whether this is true, and which software update version a person needs for their specific PCB? My PCB shows two model numbers: EBR752347 & EBR730936.

[@cpluver812]

If I install a factory compressor which non universal compressor , do i need to update the software ? and one more question , how do i know which updater do i need for control board v8.3 , v8.5 or v8.7 ?

[@leroyusa935]

As a consumer, the only thing I learned from your video is to NEVER BUY a LG refrigerator.

[@TopAppliancesrepair]

Leroy USA 😂😂

[@jpadgr8]

BUYER BEWARE... I’m a appliance/HVAC tech. I’ve install LG compressors, boards, I/M’s, WV, fan motors to the RC FC, Disp. Boards, ETC. LG Fridges are POS. I WILL NEVER SPEND MY HARD EARN MONEY ON LG REFRIGERATORS. Class action law suit on the LG compressors. Garbage product. Seen customers cry to me about compressors failures. Business wise is great (sorry) due to covid all MFG are not keeping up with the demand of producing all major brand appliances. So business in the service repair is great.

[@johnsonfamily2283]

Thanks for the video. I have Been 8.7 and just replaced a fc75lbna with a fc075LANA. The jig won't discover the board and load it. I found another set of directions to force load but the jig doesn't have my boards model number. I'm at a loss. Worried now I should have replaced the board instead of the compressor. Any thoughts?

[@johnsonfamily2283]

I ended up buying a used board. Jig was okay. Board was bad.

[@cjjd90]

I have the Same issue

[@daleki0001]

@@cjjd90 Which board did you install? What part No.? EBR...?

[@quoctrangchuotbeo4]

Any ideal which one or which model will work for the LG refrigerator model: LMX25964ST 00? Thanks

[@quoctrangchuotbeo4]

Sorry I mean Any ideal is this LG, V8.15 Rev17 will work for the LG refrigerator model: LMXS28626S/ 00? Thanks

[@Appliances-Help]

Can't you update the software version on the JIG device itself?

[@quoctrangchuotbeo4]

Any ideal is this LG, V8.15 Rev17 will work for the LG refrigerator model: LMX25964ST 00? Thanks

[@jeremys5582]

When that happens it means there is no software on the sd card that is in the jig. You have to go online and download it to the jig. Then it will work

[@sethmeistergee]

You do not need those cheesy sound effects. Your video is fine on its own.

[@pietdepad4103]

Hi Thanks for the video, you said that you bought this programmer for 40-45 USD Where can I buy this programmer?

[@v-modsolutions6946]

Real cool bro, I cant beleive what appliances have come too.

[@armandoarroyo100]

you mention that cost is like 30.00 dlls. and the only place that I found it cost 190.00 dlls ???

[@armandoarroyo100]

where can I get the rewriter and it comes with the card ? the place that you mention to the other guy won't sale it to any one but companys ? why ?.

[@jaimevalles8064]

go to sears store

[@jpadgr8]

You have to be an LG certified appliance company. It’s not for consumer purchase. Not all LG models require a software update. If it does need a software update the fridge must have a compressors failure. The compressor will be a third GEN COMPRESSOR that require the software update pending on the model number of the fridge. The new compressor will be labeled a software update is required with all the needed instructions and the certified tech will installed the software update permitting if the PCB does accept the software.

[@griffmustard]

I bought a Rewriter from Ebay (firmware version 8.8). My fridge was built in 2014, and my PCB board model number is (ERB770425). My attempt to upgrade failed. The writer display was showing information about Panasonic and Toshiba. Within 3 - 5 minutes, the display then says " Failed.....remove from device and try again ". Maybe for my Board, I need a firmware with version (8.3 or 8.5).

[@griffmustard]

@@Carbon_Fiber Unfortunately No !! My board is not capable of being upgraded, because of the year of manufacture. Luckily, I was able to find an exact Compressor model as the old one, installed it, and all is working again. I will go a few more years with this LG, before I buy something else.

[@w77videos]

Thanks for the video.. big help.

[@TopAppliancesrepair]

hey cool thank you too , im happy the video help you

[@carbonqwen101]

Thank you for the video! We are trying to update a Kenmore Elite with version 8.9, it is failing. I am looking for the other versions that you have in the video...Do you have a source? Thank you!

[@edwinbomb355]

I've got the version 8.9 as well, and it doesn't want to update my circuit boards

[@midwestmarauder4821]

I have a 8.7 and it doesn't want to update mines either

[@chadhoward3726]

Where van I get those testing devices

[@TopAppliancesrepair]

Chad Howard you can go online and buy it , the part # is CJT30000002

[@armandogomez4805]

Top Appliances Repair Corp. Houston can you please send the website to get the part, any idea how much

[@LincolnRia]

Have gotten the device​@@armandogomez4805

[@LincolnRia]

​@@armandogomez4805 have you gotten the device?and how much does it cost

[@LincolnRia]

​@@TopAppliancesrepairCan I get this device in AliExpress or Amazon?

[@devoygoff5660]

Can you download the software from your devices to a computer and make them available so I can program my jig for the different software versions? I have ver 8.9 and it won't read my board so I can program the board. Thanks!

[@devoygoff5660]

I have the ebr74796444 board

[@juanmazapan9044]

I manage to find a 8.13 works fine more dialogs but good

[@kidsglovestv6134]

Hey thank you doe the video

[@heatncool]

Were do you get the flash drive adapter for updates.

[@jpadgr8]

You have to be a LG Certified appliance company. It’s not a consumer JEG product or part replacement.

[@heatncool]

@@jpadgr8 thnx

[@nelsonc1687]

Lg manufacturer, I believe

[@terrysmith8119]

Excellen video. WHERE CAN I BUY AN 8.7 UPDATER. i just bought one on ebay and it cost over $100 and it will not work.Do I need to be connected directly to the internet or does this device run off satellite or some other network? The fridge just had a new compressor put in it but it won't run. Updater says insert SD card?????

[@TopAppliancesrepair]

Terry Smith hey, sorry that you are having problems with your update. I recommend you to go to your local appliances part department.

[@vadimtyutyunnik353]

Does anybody know what in those updates?

[@ritchpoint]

I am technician bought my software rewriter on line but doesn't work. Though I had bad compressor. bought new lg on line but the software is asking me replace compressor? with question mark . when I press the switch it goes to no

[@TopAppliancesrepair]

Hello , When I ask you if you are replacing the compressor put yes and hold the button

[@TopAppliancesrepair]

Hold the bottom on the yes

[@aumcare]

HEY SIR, MY FLD2 JIG NOT WORKING ERROR SEEN PORT 5 PLEASE HELP

[@w77videos]

BUY IT ON EBAY

[@mkelectronic1779]

Device name

[@kifayathshariff1631]

Ifb frig (5r) error code tel me