LG Washing Machine spin function problem fix | LG fuzzy logic 6.5Kg top loaded machine.

This video for fixing the spin function problem of LG fuzzy logic 6 .5Kg top loader washing machine. All the functions working properly and it stopped to work spin function which uses for air dry at the end of the washing operation.

[@wyattreynolds5401]

Thank You very much for the clear, informative tutorial! I'm doing apartment maintenance in Norman, Oklahoma. We have compact GE washers that look very similar to your LG. I was called to check out a tenants washer that would cycle just fine until it came to spin. Would never have considered that the fault may be with a short in the water intake solenoid. Now I have a fix to try.

[@naseralbusairi1624]

I don't have a multimeter at the moment and I wanted to test my solenoid. You gave such a good advice is to bypass the solenoid and start spinning mode. If the drum start turning it means defective solenoid. Thank you so much.

[@bineshchauhan8713]

Best I get 2 benefits from this video 1 solution of fault & to learned english Thanking you

[@jillser3962]

been searching youtube a while as i have the same problem with my washer after it was exposed to the rain water... will try this tomorrow.... many thanks.

[@bonganimthalane3804]

Washing wash

[@mohammadiqbalshaikhshaikhbhai]

Very good always mind is set for pressure sensor defects but it's clear today thanks🌹

[@adarshbbabu6247]

Good nice presentation please do more videos we are expecting from you many ideas

[@umapadaya2182]

Thank u thank u so much bcs I have same problem and for this I have searching many videos

[@ashokebiswas7418]

Thank you very much for the information of technical defect in Washing machine.

[@mumtazhussein3482]

Thanks for this tutorial. I have spinner problem.

[@arshpopalzai9619]

I had did the same almost but the only thing was the part which I couldn’t find exact one but thanks for sharing so now I can but different solenoid and replace the now water inlet valve thanks a lot

[@litoc.6868]

thanks for your help..i fixed my wife's washing machine ( lg inverter direct drive)

[@supremojhunbert3514]

Good job bro...I need this in the future... thanks.

[@charlesmwangi164]

Many thanks for using English. I like your videos. Kenya East Africa

[@lazymindtech6880]

Nice to see your video. It helps me a lot thanks

[@rijwanullaattar7406]

Very well explained thank you

[@niroshperera6733]

Good job bro...I need this in the future

[@rajakumar.3738]

Nice super sir well explained

[@sandakaw]

Thanks mechan! It helped me!! 👍👍

[@lionheartchannel5842]

Thanks for sharing this video master.

[@jalaldeenazmi8055]

Your explanation is worth tnan a world thank you very mouch sir 🙏 God bless you, sir 🙏 🙌 ❤️ ♥️

[@Allieethebaddie]

Thankyou, Very useful.

[@bestesalterbestesalter7806]

I was happy about your video because I have the same problem with my lg I did everything like you but the SPIN still doesn't work What else can it be please urgently for your help dear greetings ewald

[@choubeyvlog2176]

can you make more video on washing mashchin your video is very imforetive...thnx

[@dohcharlesrobinson1275]

Nice work truly nice work

[@meeralebbevellathamby1307]

Excelent explanation

[@jaisonserco1729]

Bro excellent job N nice language and presentation i am going to subscribe you. U deserve it. I am also doing some maintenance of equipments. Same LG unit almost same fault am facing now. When i was not in my house, someone attended the issue 2 time and bribed 2000 twice still there is same issue. While washing several times its stopping. When i refresh the connection or reset the wiring again its running. Could you tell me what will be the issue.

[@ravifixall]

Thank you. Check bothe water intake valve solenoid and the water level sensor one by one. This knid of errors could occur due to both components.

[@das-electrotech.]

Tnx for sharing master..bagong kaibigan..sending my full support

[@sewsallaboutlearning5339]

Thank you soo much 🙏 it was very informative 👍👍

[@hasandharwad3379]

Hi

[@shaanjayadewa8708]

Good advice great

[@richardstephen5174]

Thankyou brother I have searched for the same problem . Thankyou .

[@samanthamunasinghege4558]

Your Video is nice & very clear instructions. I have same machine & it's giving error code de . Pls help me showing a video fitting that. 🙏

[@ravifixall]

Check the piece of magnet fix on the lid wich use to send the door closed signal. When it loos this error could occur. It is a common problem for this machine.

[@latheeshshettigar7880]

Thank you

[@Alphasera2023]

what if doesn't run when you disconnect the solenoid valve. i have the same problem in LG smart inverter 10kg top door. please can you guide

[@kishorsonawane1090]

Thanks brother

[@onlinesaifu]

Where i can get spin motor of fuzzy logic 7.5 kg. Because my washing machine there is spinning problem.

[@bharathjemi8672]

Thanks

[@haflalali]

I have the doubt water intake function is ok then washing and dryining ok but ispin only not waking problem is solonite vall ?

[@sajib24542]

i have110v inlate valve .but if i replace to 220v is it work?

[@vannuvilaiti1340]

My area water TDS is about 800 , will high TDS damage the top load washing machine

[@sathishkashyap4151]

Where we get solonoid valve in washing machine? Outgoing water is not going during Spin function?

[@pradeeppandey3620]

Excellent .

[@ravifixall]

Thank you.

[@giashuddin1117]

Why spin is very slow and clothes not dranin properly how it's will repair

[@farhatjamalkhan8626]

I HV LG Top loading machine soking sound is appearing. Pls help me abt this sound problem.

[@nazkazmi1324]

Hi Ravi,my LG top load does not take in water during rinse cycle and there isvoice coming,spin cycle works fine,.water intake is fine during soak or wash.what could be issue.

[@ksarmysori1808]

Plz tell us, the temperature issues in LG frontload Washing machine

[@WillieTheron-gx7cj]

I have a newer model 13kg with 2 solinoids. 1 for cold and one for hot. Should i diconect both solenoids when doing the test?

[@ravifixall]

Try both

[@hafiznaveed9151]

Hi Sir lg automatic washing machine model WFS65A01AHT spin washing working only other functions like rinse, Washing not, please guide me about it

[@rajeshbaijnath9208]

Look at that... It works

[@tharangasilva209]

Do you have a work shop in galle?

[@danilojr.penalosa2506]

Very goooddddd

[@wildwoodtop]

I was told LG is Flawless and it would be a rare event if it stopped performing

[@loreninavaidya7820]

What is the rate of.the.belt. the belt of my lg 6.2 ia.broken

[@brianthompson9158]

I have the 8.2Kg machine which is almost identical and does not spin, when carrying out the the same test at 3 the drum does not spin but I get a DE flashing on the display - is this the same problem with the water level switch?

[@jeremyalexandermauli3243]

Hi Brian mine is doing just that. Flashing DE which means distribute evenly. Did this with no success even when machine is empty. Did you end up fixing the issue. Thank you in advance

[@fajulullashariff8528]

Automatic washing machine while taking water second time it was not running what's the problem

[@mohamedrifaz3500]

What is the any other problems are coming to not working only spin

[@SaleemKhan-lu8ys]

Hi bro its nice video i lke it but u have fullyautomatic to sami automatic converting video upload it bro thnx

[@steamthadj9413]

kzbin.info/www/bejne/fqPbep-EgptqrNE

[@gg89899]

Could you please help, My LG top load automatic washing machine in the spin mode it is taking water (it should not take water for spin function right?) and draining continuously, so spinning not happening. And when power button is switched off and mains is on main motor is running slowly. what could be the problem?

[@ravifixall]

Check the water level sensor as in below video. kzbin.info/www/bejne/iJDCh4CBqq-aZpI

[@dineshkumarm7955]

Sir, Which washing machine is better IFB vs Lg as per ur experience? Please suggest good washing machine

[@ravifixall]

all the modern washing machines are good with modern technology. personally I love LG brand with Korean Technology. however I can't condemn other brands also as they are good too. I would like to mention here as we are Asians, Korean brands are good and durable for our budget

[@williamlim2054]

Hi Ravi, my rinse function and spin function is not working. Where is the problem ?

[@robinvarghese6912]

Good

[@manubhaiparmar9787]

I Have Lg wm WF T- 7519PV but now speaking funcation ( washing start washing complete) is not working how can repair. Pl. gjve demo repair.

[@gameplaywithtamilanda]

Is the spin problem related to board

[@phoque6]

Hi Ravi! when the machine is in wash, the bottom makes a lot of noise like bearing sounds and the wash sometimes doesnt move. But during spinning it spins ok. Any idea why? thanks

[@ravifixall]

First check the belt tention which spin the drum by a motor. And check washing parts inside the drum which is use for wash cloths by rotating. Sometimes they might be loos.

[@phoque6]

@@ravifixall thanks bro. will check it out 😃

[@cutebaby-ki6th]

@@ravifixall yh

[@ashokan2812]

Where can I get LG wf-701 suspension rod....Abans hv no stock

[@ravifixall]

Sorry. No idea

[@josebandojo2034]

hi . . i want to ask question . .what is the cause if the drain motor open when i push on the srart button

[@ravifixall]

Check the water level sensor.

[@rodeltubangui2537]

How about na wash is not working but the spin is working?

[@anusamkaria4263]

Today, I had the same issue in my top loaded washing machine. What's the cost of inlet solenoid valve? Is this available on Amazon or Flipkart as the model is old one. 6.kg top loaded one. Please suggest

[@shashinair2757]

Videocon digi model fault spin is not working and threeo light glow spin. Wash. Rinse

[@msraviraj1]

Excellent !!

[@VanguardX89]

Hi, I have a samsung washing machine, could wash the clothes but reach the dry function it totally stop won't spin dry the clothes.. could it be the gear problem for the spin dry??

[@ravifixall]

Check water intake solonoid, water leave sensor switch and drain valve motor first.

[@bongiwerasmeni2288]

Hello ,my LG top loader serial no 204Kw00654 doesn't want to switch on ,what do you think the problem is?

[@ravifixall]

Make sure you have powe from wall to the machine, next check main fuse in the washing machine.

[@baduguraghubabu6479]

Bro water not going out side after wash So which problem pls reply

[@kritantsinghnaik]

After removing wire, it doesn't start spinning. Facing same issue..What should I do?

[@lubnaabid3389]

I hv fizzy logic top load 7kg w.machine during washing its speed is quite slow .can u guide me?

[@ravifixall]

Rotation speed depend on the washing option you select. Fuzzy mode or gentle mode like that. Check it with different washing mode and different watter level without clothe to get an idea. If it is too slow just check the motor belt tention underneath.

[@sanjaygaurkar4432]

I have LG Fuzzy Logic 6.0kg machine. I got the problem that shan i start the machine the 2 indicators beeps after a minute full loading of water and starts washing. The indicators are wash & spin. What to do?

[@ravifixall]

if you try already this video and not respons Try this video with below link which is diagnose the water level sensor. kzbin.info/www/bejne/iJDCh4CBqq-aZpI

[@avinashbaboothie1243]

Hello. I have Samsung top loader 7,5kg has the same problem. If the water in take valve is not the problem what else could be the problem. Thanks.

[@ravifixall]

If other functions work properly, problem might be in water level indicater switch. Just reset it by removing it's small hose from the tub end and blow it by mouth, if you hear clicking sound that mean switch is ok and reconnect it to the tub. Next look for the drain hose and the filter is it blocked, if so clean it, these two options also can cause to stop some option in a properly working washing machine.

[@williamlim2054]

After removing the wire from the Water intake valve solenoid, the spin still does not work. Does that means the Water intake valve solenoid is OK ?

[@ravifixall]

Water level sensor may cause this issue.

[@animish1000]

@@ravifixall can we repair water level sensor?

[@mdh7372]

I have LG top load fuzzy logic washing machine timer stcuk .wshing time take too long how to fix it

[@SaleemKhan-lu8ys]

Bro did u find the solution for ur problem shre me that video

[@SaleemKhan-lu8ys]

Bro did u find the solution for ur problem plz shre me thar video

[@pratikdamji9012]

Inletvolve ka kaam hai pani lena our jab pani level pe a jaye tab band hona

[@jowseepphhcampos855]

What if my washing machine water does not stop filling the drum when it reaches the desired amount and now spin does not work too. Is the solenoid valve the problem?

[@ravifixall]

Does it indicate any error code?

[@jowseepphhcampos855]

@@ravifixall No error code it just doesn't spin

[@edgardoancheta4583]

My LG washing machine has been out of order since its door magnet lost; a "dE" warning in its indicator has also appeared..Sir, could you show a video on how to repair it? Thank you very much and more power! By the way,my LG unit is similar type and model with that on the video....

[@ravifixall]

This is a simple case you can fix it by yourself. If you have the piece of magnate replace it in the socket on the door where it was and tape it on to avoid loos it again. Otherwise you have to find same size of a piece of magnate to hold on the door. Otherwise if you have a removed speaker which has magnate behind it or bit bigger other piece of magnate you can use to put on the door affter close it. Just put it on the edge of the door where original magnate was placed and move slowly left or right until dE error gone., but don't move too far from the middle of the door. when dE error disappeared, that is the point where you must put the magnate evertime you use the washing machine. But best way is replace the piece of magnate in the original place where it was built. Best luck

[@edgardoancheta4583]

@@ravifixall thank you very much, sir,for your instructions.i did it and it worked..pls continue the good deeds.God bless you

[@manishteliya3165]

Sir I hv samsung wooble automatic washing machine, somtime when machine is in spin mode only pulslator is working but drum is not working and some time dhrum is also working but it's work slow ,so I hv change capacitor also and I hv check the belt also ,then also drum work slow ,son please let me know what to do which part is not working thanks

[@ravifixall]

Check the drain motor which release the brake to let the spin drum faster.

[@memeoc7747]

Tq for the good info.. Where can i buy m.parts.

[@ravifixall]

Just find in local parts store. Otherwise everything available in ebay.

[@memeoc7747]

@@ravifixall Thank you..

[@Chikeizy]

Hi, pls I have a fuzzy logic 9.0kg Whenever I switch it on, it spins for like a minute then stop. It determine the quantity of clothes put inside, then collects water but as the water is entering to d machine it drains out as well ... It doesn't spin again, how could I solve it.. I can't wash or rinse with it only spin to dry it does ... What could be the solution

[@ravifixall]

Mainly we can suspect the water level sensor switch with your given details. First remove the back cover and disconect the hose from basin side which is conected between water level sensor and the basin. Then blow it by mouth and connect again. Try this way. But don't forget to do this method affter disconect the power and empty basin. With this method we expect to release if any unwanted air pressure has been built on the sensor or check the sensor work properly. If sensor machanically work properly you should hear a clicking sound from the sensor. If not work with this method, you have to replace the water level sensor, because there is no 100% correct way to diagnose this sensor. Because sometimes even faulty sensor shows correct multimeter reading. 2. Sometimes sort circuit of water intake valve motor can affect for this. But you can easierly diagnose this. Just let the machine to fill water, then power off the machine and remove cable connection of the valve motor and bypass it. And start the machine from where it stoped. Better you do this step first and check the water level sensor second.

[@olaoyesamson5363]

@@ravifixall master well love you Chanel pls your contact nomber sir

[@RATANKUMARRateria]

Where to get this spare solenoid valve..?

[@ravifixall]

Have to look in a local part store who sale washing machine parts. Otherwise look in ebay or online.

[@tamilbayanVlogs]

Bro my washing not spinning but after i spin manually it start to spin . Is it capacitor promblem or what ?

[@ravifixall]

Problem might be with the water level indicater switch. Please Watch this vedio to get an idea about water level indicater switch kzbin.info/www/bejne/oqiro32sf51-iqs However need more details to guess and diagnose.

[@ihsanelahi500]

Hi spin issue with same model, spin mode,6 minutes time will move to 3 minutes immediately after selection & later spinner no work ,kindly advise

[@ravifixall]

Check both water intake valve and water level sensor, they could make this kind of faults. Also drain valve or pcb, stuck drain hose could be. Check one by one.

[@muhammedali-nu8es]

videocon fuuly aitomatic washing machine spinner not working how much money we want to spend for the replacement of parts or to buy the new parts

[@ravifixall]

If it is the problem with water intake valve motor, it will cost 4$ ABOUT, if the problem with water level sensor, it will cost 6$ about. but it depend on the which part is malfunctioning.

[@mohamednuskhan7526]

Hello bro. My washing machine is suddenly stop in middle. Suddenly turning off. What is the problem and how can I solve it.

[@vijaybathe4887]

Spin problem in top load LG machine ,i already changed the spin motor. PCb Also changed from the repair shop but still spin problem.

[@ravifixall]

Check water intake valve solenoid, water level sensor switch and the drain valve motor.

[@rajansoni1]

I have LG fuzzy logic 8 kg washing machine. at time remaining 30 min whole machine suddnly vibrating.and then stop. why ? can help me out this issue?

[@ravifixall]

Machine vibration could occur due to cloths twisting during the spinning. Just untwist cloths and start again the machine.

[@harisreecvp616]

hi, how we can fix wire breaking problems because rat making like issues

[@ravifixall]

You get the rat guard for this model. Install it underneath.

[@robinvarghese6912]

videocon digi gracia 5.5 kg rinse & spin problem how rectify the issue washing is normally running, but after washing water Rejetecion not working, just blinging rinse led light

[@robinvarghese6912]

Kindly help me

[@robinvarghese6912]

After washing prosses drain function not working, just blinking led rinse

[@rosnshrestha2347]

Help me sir im not getting water for rinse cycle... Wash cycle is ok. It takes water and starts to wash but when it goes to rinse mode water does not fill and stops function

[@ravifixall]

Check the water level sensor, drain hose is not clogged and check drain valve too. Hard to say what it is exact without inspection.

[@venkat7760]

Hi sir. Without solenoid it works.why to keep it without any changes

[@ravifixall]

Solenoid is necessary to water intake control. When it has short circuit it affect to system functions.

[@ansariikramuddin465]

I also have same problem,but I am not using water input through solanide valve.i am taking water manually.what to do.my spinner not working.pls reply.many thanks

[@ravifixall]

Watch this video, kzbin.info/www/bejne/iJDCh4CBqq-aZpI it might help you. I cant't say exact what it is, as it is a manual or semi automatic machine without inspection or more details.

[@NadeemAhmad-gm7op]

But solonide value faulty washing machine not working not spin problem

[@mohamednippunippu4527]

Biro iwant diskas with how to do same w ork

[@wowisabelinoart1102]

Hello I have I problem with my LG FUZZY LOGIC. THE PROBLEM OF MY WASHING MACHINE IS THAT WHEN EVERY TIME I WASH THE DRAIN MOTOR IS PULLING THE DRAIN PLUG AND IT WILL NOT MAINTAIN THE WATER REQUIRED to wash spin.. but when I disconnect the hook on the drain plug. It will wash and I put i back again so that it pulls the drain motor to drain so it will continue to spin.... What is the required step to fix this Or should I replace the mother board of the lg fuzzy logic.?. Can you help me to decide what to do.

[@ravifixall]

Mainly this error could occur due to Bad water level sensor. Better you replace it first as it is not so expensive. But this error could occur due to bad drain valve motor or bad mother board too. But mostly my experience with this machine with the bad water level sensor.

[@wowisabelinoart1102]

@@ravifixall where can I locate that hope you cud have step by step tutorial in this problem

[@ravifixall]

kzbin.info/www/bejne/iJDCh4CBqq-aZpI

[@hifzafaisal3292]

Wash ky time tub nh chalra kuch btaden

[@Car_hunb]

I have the same problem as in the video and washing machine was making a noise while spinning and now it stopped fully ....can you please visit my place and repair it for me....thanks in advance