Lian Li O11D EVO x EK Mana G2 Distro - White PC Build!

Finally, a white PC build with Lian Li O11D EVO and EK Water Blocks EK-Mana G2 Distro. Different approach with recording, so hope you guys enjoy this one.
Build specification list:
►Lian Li O11D EVO White: geni.us/YqcQ
►Lian Li UNI FAN SL120 V2 White: geni.us/LVlT8o
►Kingston FURY Renegade DDR5 RGB White 4x 16GB 6400MHz: geni.us/vGtg
►Kingston KC3000 PCIe 4.0 4TB: geni.us/wYNQ
►CableMod Custom Sleeved Extenders: geni.us/TAYTe
►SeaSonic VERTEX GX-1200: amzn.to/43aHSak
►ASRock X670E Taichi Carrara: geni.us/FymN9S
►AMD Ryzen 9 7900X3D: geni.us/DAgZBb
►MSI GeForce RTX 4080 Gaming X Trio: geni.us/YblJ
►EK-Mana G2 O11D EVO Distribution Plate: tinyurl.com/ek...
►EK Water Blocks parts: www.ekwb.com
►Subscribe here: bit.ly/3erJB33
Check out my other channels:
►PC Crazy Racing: bit.ly/3Buykfn
►PC Crazy ASMR: bit.ly/3HqYVxt
►Join my Membership to get access to perks:
/ pccrazydario
My recording gear:
►Camera (video): Blackmagic PCC 6K Pro: geni.us/yZlAn
►Camera (photo): Canon EOS 90D: geni.us/QETkjz
►Lenses: Samyang CineLens VDSLR MK2 kit: geni.us/nUoaK
►External monitor: ATOMOS SHINOBI: geni.us/IFGQ25k
►Storage: AngelBird Match Pack Blackmagic PCC 6K PRO: geni.us/0bQA
►Lighting System: NANLITE FS-150: geni.us/09WC3A
►Softboxes: NANLITE SB-PR-90-Q: geni.us/UT0RA
►RGB Tubes: NANLITE PavoTube II 6C: geni.us/HHd76
Music by Epidemic Sounds:
►Dvine - Eternal State
►Ava Low - Through The Prism
►Ballpoint - Stack It
►Lupus Nocte - Powerhouse 1984
*************************************************************************************
BUY ME A COFFEE ☕☕
If you think I need more energy, you can show your support by buying me a coffee! Supporters get a shoutout in the next video! No subscription or sign-up required!
►LINK: www.buymeacoff...
*************************************************************************************
NOTICE: Amazon links provided are linked to my Amazon Affiliate account and support the channel at no extra cost to you.
#lianli #o11devo #timelapse

[@chillipalmer6112]

This was like watching Da Vinci paint his Vitruvian Man..a work of art, excellent build, as always. 💯💪😎

[@PCCrazyDario]

Thank you very much, even though I wouldn't compare this build to anything Da Vinci did. But nevertheless, much appreciate your kind words! :)

[@chillipalmer6112]

@@PCCrazyDario Don't be so modest, i was just trying to describe how i felt watching your video..clean awesome build, masterfully done. You deserve it. Keep up the good work!! 🤟🍻

[@PCCrazyDario]

@@chillipalmer6112 Well I was raised that way. :P But thank you very much. Really does mean a lot and as I wrote to someone, these type of comments really get me boosted to keep pushing even harder! Cheers man! :)

[@Helstar666]

Dario ovo je vrh vrhova , Bravo !!!

[@PCCrazyDario]

Hvala puno!! 🤗🤗

[@0Metatron]

I've just ordered almost all of the same parts but in black, 14mm tubing and for the o11d original case. Can't wait to put it all together

[@Dukitek]

Outstanding

[@PCCrazyDario]

Appreciate it man! :)

[@binski48]

Beautiful build! I hope to do something similar someday. Question…what is your fan configuration? I’m assuming you’re in taking on the bottom, and exhausting out the top, so is the back exhaust as well? Do you find any dust issues with negative pressure in the case?

Odlično izgleda. Video je montiran savršeno.

[@PCCrazyDario]

Drago mi je da ti se svida! I hvala za video montazu. Htio sam se malo poigrati da bude drugacije. 🤗

@@PCCrazyDario Nema na čemu. Lijepa kombinacija su mi krom i bijela.

[@PCCrazyDario]

@ Iskreno, htio sam sve full bijelo, ali to je nemoguće kada svaki proizvođač bijelu komponentu išara ili s crnim ili s srebrnim/kromiranim dizajnom. Hvala još jednom! :)

@@PCCrazyDario kužim, ali odlično je ovako. Ja sam gledao da svoj hladim vodom, al sam odustao nakon ukupnog troška kod EK , s tim da sam ja išao na varijantu sa mekim cijevima. Da budem iskren, čak me malo plaši rastavljanje grafe samo za promjenu paste i termalnih trakica iako bi to svakako trebao napraviti :D

[@PCCrazyDario]

@ Hvala! :) Da, cijene za naše standarde su stvarno visoke, ali iskreno što si mogao i sam vidjeti, temperature su nevjerojatne. Onako, što idemo naprijed, temperature su sve niže naspram stock coolera (iako je i on brutalan). Razlika u cijeni soft i hard tubinga ti je skoro neznačajna, jer opet trebaš cijevi i opet trebaš fittinge. Može se napraviti da soft tubing izgleda cool, ali samo to. Dok hard tubing izgleda uvijek perfektno ako je dobro napravljeno. Za rastavljanje grafe, samo polagano, paziti na svaki šaraf i što se točno radi. Sve će biti ok onda. ;)

[@kieranpi1674]

By any chance do you know what temperatures this pc runs and how loud it is? What are the fan orientations (are they all pushing air into the pc because that seems a bit inefficient)? It would mean a ton if you responded because im trying to build a very similar pc!

[@matthiaskoegel1]

Hey really nice Build. What diameter are the tubes? I got 13mm atm and i dont know if my next remake is getting bigger ones :D

[@PCCrazyDario]

Hi, thanks a lot. The tubes are 16mm. :)

[@krema152]

prekrasno nesto

[@PCCrazyDario]

Hvala puno! :)

[@LevelUPGamingTech]

Sweeeeet 👌

[@PCCrazyDario]

Thanks bro! :)

[@LevelUPGamingTech]

@@PCCrazyDario Anytime, no need to tell you that it's an awesome build, we all know it 😉

[@PCCrazyDario]

@@LevelUPGamingTech Well it's always nice to read something like this without a doubt. So thank you. :)

[@bladesofguyver]

Adore this ❤

[@PCCrazyDario]

Thanks bro! Appreciate it :)

[@SinOne390]

Lovely but that top tube on the gpu would annoy me 😂. Does it matter what order things are connected? Like you’ve got the input and output of the top rad into the distro. Most builds I see have input from rad into distro then output into CPU. I’m very new to water cooling!

[@PCCrazyDario]

I'll be honest with you, it annoys me as well. And I couldn't make it fit straight because of the distro. If I lowered it down, then I would have problem with the CPU tubes and the bottom GPU tube. So rather have one tube going like this, then others. The distro is designed like this so there aren't to many bends. This is why radiators go straight to the distro nad then to CPU or GPU. Doesn't matter, cools almost the same tbh.

[@davidagwazie6936]

Have you tried using the micro 90 from ek? Might line up better? Ngl, as is, it would trigger my ocd too much@@PCCrazyDario

[@reidsb78]

@@PCCrazyDario That seems particularly odd since EK supposedly designed these things to take all that positioning into account. May have found a design issue there.

[@PCCrazyDario]

@@reidsb78 Who knows honestly. I really did tried multiple combinations, raising the distro up and down, checking the manual million times. Nothing. I guess the micro fitting is needed which is a bit… Stupid.

[@PCCrazyDario]

@@davidagwazie6936 Who says it isn’t triggering my OCD. But regardless, case is brilliant. 😁

[@verschleppt]

Which tubes were used? Build looks great!

[@PCCrazyDario]

16mm Acrylic, and thanks! Glad you like it 🤗

[@DJaquithFL]

The build looks nice! 😎👍 6:21 Why? Why do people get extensions when they can simply go to CableMod and get the exact length with whatever color combo they want that plugs directly into their PSU. Why?? Otherwise it looks fine, but I probably would have gone for an RTX 4090 considering the cost of you EK blocks and liquid cooling which I assume is north of $1,500 US dollars. Also 8:34 considering this easy setup I would have gone with 90° pre-bent tubing or even better chromed copper tubing. I don't care how good you are or how many of these you built. There's no way you're going to get 90° tubing as good as the factory not to mention the consistency. CPU-Z J8P8UR

[@DJaquithFL]

Also, the top GPU inlet I would have used the next higher outlet on the distro and added an extension (they are cheap) as opposed to having it angled down. It's obviously something that you can change the next time you have to drain the system. However, as is, it's pretty noticeable and you know it. The only reason I'm criticizing it is. I've essentially built the exact same system using an 011D XL ROG case with the affirm mentioned CPUZ parts.

[@DJaquithFL]

USB Header, I noticed you didn't install any of your USB headers for your case. You may want to look into a "Right Angle USB Type E Adapter, Front Panel Header Male to Female USB 3.2/20Gbps 3.1/10Gbps" adapter. The cost is less than $10. For whatever reason, CableMod doesn't make that type of extension but they have ones for the traditional USB 3.

[@duarteribeiro1520]

I think it's because cable extension are agnostic to the psu, if you get full length cables it won't work on all psus with extension it will work for all psus because the ends of the cables are all the same

[@DJaquithFL]

@@duarteribeiro1520 .. I guess if you're always going to build the same exact color themed PC then maybe extensions make sense. My thoughts, the only extensions that make sense to buy are those RGB Strimer Lian Li for main power and GPU.

[@mza2001]

I have the same setup exactly and my temps are good but it’s just my room heats up moderately quickly, is it due to negative pressure etc? I’m unfamiliar and need help, thanks 😊

[@Steak51430]

What size tubing and fittings did you end up using? Trying to go for a similar look here using EKs hard prevent tubing since I don’t want to do it myself.

[@PCCrazyDario]

I used EK-Quantum Torque HDC 16mm. What I noticed is that the caps of the hole covers on the distro are a bit too close, so when you place a 16mm HDC fittings, it collides with the cover so you have to cut a bit of the plastic cover unfortunately. Otherwise, if you don't use those plastic EKWB logo covers, you'll be ok.

[@Steak51430]

@@PCCrazyDario gotcha. Thanks for the response. So the 14mm ones would work better to solve that issue?

[@PCCrazyDario]

@@Steak51430 I think 14mm would be a perfect match. And you are welcome. :)

[@disneytok]

Newb question. If G2 distro replaces the side fan position, would thermals suffer?

[@disneytok]

Can you still place fans behind the g2 distro if one wanted to? Thinking about using the xl

[@lawshadow2011]

Nice temperature on your RTX 4080 during gaming?

[@PCCrazyDario]

I didn't test any games, but I ran AIDA64 Extreme Edition System stability test and the GPU was 20C lower. So with standard cooler it goes up to 65-70C, while with liquid cooling loop, it was somewhere from 45-50C.

[@lawshadow2011]

@@PCCrazyDario Thanks good temperatures you got there. My RTX 4090 runs at 100% load during stress test (3Dmark stress test) around 48c - 49c water temp = at idle before start 27c (its summer and i have no AC...) during test around 33c but...i do have a lot of radiator space (12 x 140) ambient was 25c. These hot heads both the raptor lake cpu's and RTX 4000 series need good cooling you should try out a MO-RA420 Pro rad....If it wasnt for you i would NOT bought the Asrock Z790 Taichi but your review made me buy it and im happy with it had some little hickups with XMP solved by lowering 400mhz on 6800mhz ram kit and tighten the CAS. Glad i found you man. keep up the good work love to see your videos. PS wanted to buy you a coffee but...no paypal option unfortunatley...Just wanted to support you compared to other PC channels yours is high quality lots of reviews (which takes effort) and your humble and cool guy.

[@PCCrazyDario]

@@lawshadow2011 My apologies for the late reply. I had loads on my plate lately with videos and events. I am due to more than 100 comments haha. Regardless to that, I really appreciate your kind words and thank you for the support! :)

[@lawshadow2011]

No worries man i understand its a lot of work maintaining your site and make QUALITY videos take your time. @@PCCrazyDario

[@PCCrazyDario]

@@lawshadow2011 Guess what, again. Apologise. :D Thanks for understanding and thank you for the compliments!

[@shockwave10k]

Do you think it´s possible to use x-Flow 360 radiators (alphacool or blackmagic) in top and bottom or maybe even in all three posible positions? It seems that on the rear side is not enough space or barely enough space for the second connection chamber

[@Paul_in_FL]

I have them in an XL and they are tight getting in but space is good. Have to prewire CPU power because they are just that thick.

[@lexiwho-kq2lh]

nice video

[@PCCrazyDario]

Thank you very much and appreciate the comment. :)

[@schnellkannjeder]

super nice... would it also work if I left the GPU out of the cooling system???

[@PCCrazyDario]

Yeah, of course, but then you don't need two radiators and a distro in my opinion. You can go with something simpler.

[@schnellkannjeder]

@@PCCrazyDario My idea is to install a custom water cooling system in the new Lian Li D11 EVO XL at the end of the year. would like to take the ek radiators mana distroplate and the lian li infinty fans....all in white 🙄😵‍💫

[@PCCrazyDario]

@@schnellkannjeder That sounds lovely. Don't forget the white MBO and GPU. ;)

[@schnellkannjeder]

@@PCCrazyDario The GPU is an Asus Rog Strix 4090 OC in white, it looks so good because I don't know if I put it in a water block😬 MBO is difficult because I have a Threadripper and the Asus Zenith II Extreme Alpha. Unfortunately this isn't available in white 🙄🤷🏼‍♂️

[@PCCrazyDario]

@@schnellkannjeder Ah yes, the card does look sick. Well, if I am not mistaking, there is a white GPU block from EKWB. Maybe that might change your mind. :P As for the motherboard, guess you'll have to look the other way or swap the platform if you want to have full white build. Depending on your needs, of course.

[@Minuslarturkmencha]

Hello 🇺🇿

[@PCCrazyDario]

Hi :D