LiftMaster 877 MAX WIreless Keyless Entry - Easy Programming Video✅

[@Lovelyti_TV]

Omggggg it worked thank you so much they have changed it from how it used to be programmed in my last house😩🙌🏽

[@garagedoorgenius]

🙏

[@edwardharan7828]

Thanks for the detailed instructions! Worked perfectly after knowing different directions for different color learn buttons!

[@garagedoorgenius]

You're welcome! I appreciate the feedback Edward.

[@douggreer3346]

Worked for me the first time! Great help! Missed pressing enter button three times at end for my red button. That was not in the Liftmaster instructions!

[@garagedoorgenius]

@@douggreer3346 good job getting it to work! With the right instructions it helps. 😜

[@corridos3v3]

My door goes up but don’t want to go down with Controler it just makes motor noise and sounds click click

[@garagedoorgenius]

@@corridos3v3 hello and thanks for the comment! If you hear clicks then I would make sure your safety sensors are correctly aligned. 9 times out of 10 that's what the issue is.

[@jmackay7055]

Perhaps a dumb question, but if I add the 877Max keyless entry to a garage door that currently has no keyless entry but is programmed to a remote in my car, will I need to reprogram the remote in the car?

[@garagedoorgenius]

Nope! You're good to go.

[@abdulhamza172]

Dude my keypad keeps flashing orange and the door won't open. I replaced the battery and it's still not opening... (It barely opens once every few tries) Any ideas?

[@garagedoorgenius]

Make sure to press nice and firmly and slow on the keys.

[@bobnewgent6395]

do all 877max keypads controll 2 doors. how is the 2nd door programed

[@garagedoorgenius]

To program the 877 Keyless Entry to more than one garage door opener, repeat the steps, using a new PIN for each additional garage door opener. 👍🏼

[@l.n.1299]

I have Liftmaster 877Max but just want to reset the keyless pin on it, I have had 3 years. There is a Wall Plug Reciever that operates my 1975 Sears Craftsman Overhead Garage Door. Its 45 yrs old and still works great! Can u please tell me just how to simply Change the Pinn on my Wireless Keyless entry Pad. Thank U so Very Much!!! : ) I know it must be something super simple but am afraid of messin up! I dont want to do any elaborate reprogramming, just want to change the pinn.

[@garagedoorgenius]

Your external receiver. You have to remove the cover to expose a little button. That button is your learn button. I believe you want to code it as a red/orange learn button. Just follow the steps like in the video, programming to a red/orange learn button scenario. You're not going to mess anything up! 💯

[@l.n.1299]

Ah, YOU were absolutely right sir--Color's impotant-it was an ORANGE square light! I was at first fooled by the PURPLE pigtail wire. Now the code is easily & successfully changed! I salute u....and also Sears for selling me a product that has worked every single day for more than 45 yrs without a single problem. That's what I call true Quality. :-)

[@garagedoorgenius]

@@l.n.1299 I'm so happy you got it figured out! Good job on your part.💯 Thanks for watching my video. 🔥🤓🔥

[@GRJCLyon]

Great video. My max doesn’t have all of those choices for learn buttons in the directions. Thank you for this.

[@diannemcgeathy7641]

How can I get my lift master to open and close door. It’s a 1/2 lift master 2.0 Q

[@garagedoorgenius]

Do you have remotes or a keypad?

[@diannemcgeathy7641]

@@garagedoorgenius I bought a new system. Install yesterday

[@garagedoorgenius]

@@diannemcgeathy7641 how you like it so far!?

[@cliffordhare5513]

What if your opener has a learn button that is brown? There is not a yellow, purple, red or orange or green button.

[@carolynmason5033]

Can I add a second or temp pin

[@garagedoorgenius]

You can definitely add a temp pin. Google search how to do it. I unfortunately don't have a video for that.

[@stevesepka2542]

Thank you!

[@garagedoorgenius]

Glad to help! Thanks for the comment.

[@tomchang1647]

Is there a way to reset JUST the keyless pad without doing a reset to everything? Son-in-law messed up the code and now we can't reset the pad working from the old code.

[@garagedoorgenius]

The only way you can wipe out all the codes is if you press and hold the learn button and continually to hold until the LED light goes off. When you're setting the new code for the keypad, don't clear the memory. When it comes to the steps to press the learn button, just press it in and out, activating it. Then follow the next step.

[@vsendyk]

Thanks!

[@garagedoorgenius]

Thank you so much for the Super Thanks! 🙏🏼

[@samsquires2877]

Great video. They must have changed how you program it from when it came out in 2011. They never used to have you use the pound key before the number of press to correspond to the learn button color.

[@garagedoorgenius]

Now that you mention it, I think you're right. Good point Sam.

[@GarageDoorGuy59]

Do you have any old garage remotes or openers I collect them

[@garagedoorgenius]

I used to have all kinds of old weird remotes. They ended up in a box and eventually in the trash. 😟 You gonna check out my new vid this weekend!? The new LiftMaster 85503 Video Camera. It's a sweet addition to an already awesome machine! 🤘🏼😁🤘🏼

[@l.n.1299]

I might have an old remote for you. It's only from the 1970's...which to me seems like yesterday, not old,lol.

[@navindas2]

can I have more than 1 code?

[@garagedoorgenius]

@@navindas2 just one 4 digit pin unfortunately. Although, you can set a temporary password for it. Up to so many openings or so many hours.

[@navindas2]

​@@garagedoorgenius Thanks for the quick reply, appreciate it. I tried adding a 2nd pin, but it's just overriding the first one. How can I set a temporary password? Do you have any videos on your channel about this?

[@garagedoorgenius]

@@navindas2 not a problem. Glad to help anyway. I don't unfortunately have any videos showing the temp password set up. You'll have to download the PDF.

[@tamekahicks9359]

My keypad is rapidly blinking. Wont open when I put my code in. Just blinks rapidly. What can I do to open my garage

[@garagedoorgenius]

🤔 may have to reprogram it. That's where I would start.

[@jerijoachim6]

How do you program duel garage doors with one key pad? We have the 877 max and it has the capability, but not I haven’t been able to program the 2nd door.

[@garagedoorgenius]

Same steps, different code.

[@robertromo4816]

Very helpful, I watch all your videos. You make it so simple.

[@garagedoorgenius]

Thank you Robert! 😁

[@30dmv]

Watched 7 videos before this, none worked... Thanks!!!

[@PlayforJesusChrist]

Man you are the best! Your video was the only one that worked for me!

[@garagedoorgenius]

That's awesome! I really appreciate the awesome feedback. 👍🏼

[@janinegoldstein3939]

My keypad used to light green and now it’s red. Do you know why?

[@garagedoorgenius]

Is this the same keypad or a different one?

[@theresadellecave9181]

Open and closing with the keypad will only work for me when the garage door opener light is off. Anyone know why that could be ?

[@garagedoorgenius]

That's a great question. One that I don't have an answer for. Maybe something is up with the receiver side of the circuit board. If you really want to get down to the nuts and bolts of it, I'd call Chamberlain tech support. That's definitely a new one for me. Let us know if you find the answer.

[@HockeyPurist]

TY Sir! Wife has let me out of the dog house. Your instructions worked perfectly.

[@garagedoorgenius]

Lol, glad to help! 👊🏼 Enjoy your 4th.

[@healthierme390]

Can you do this if you accidentally changed the pin ?

[@garagedoorgenius]

Yes 👍🏼!

[@glomayne]

The only video i found that worked u are the man

[@garagedoorgenius]

Glad to help you my friend!

[@carlosmojica5621]

Your instructions are correct the manufacturer video was wrong, thank you

[@garagedoorgenius]

You're welcome 😊! Glad to help my friend.

[@utahmedicineman7654]

Excellent video! Easiest to understand of the few I pulled. TY!

[@garagedoorgenius]

I appreciate the positive feedback!

[@robertbeckler5058]

I'm always sending people your way when they have garage door issues. Simple and straight forward . keep it up baby

[@garagedoorgenius]

Thanks Robert! I find myself referring back to my own videos sometimes 😅. I'll forget how to program a certain genie machine or keypad and have to go watch a video. Lolz I use these videos to send to customers of mine also. I mean, who wants to drive through some of the country's worst traffic just for a safety sensor adjustment or programming a keypad. I just send them video's and say if you can't figure it out call me back. 99.9% of the time it works!

[@mayraarellano8127]

Thank you so much!! You saved me some 💰😊

[@garagedoorgenius]

🙏

[@rlachermeier]

Can two doors be programmed to the key pad with different codes?

[@garagedoorgenius]

I believe the 877 Max you can program 4 unique codes to it.

[@rlachermeier]

@@garagedoorgenius thank you

[@Guy_de_Loimbard]

THANK YOU. The stunods at Liftmaster who made the "official" instruction video skipped a step. I was about to yank out what remains of my hair.

[@cerseiblonde3218]

I have a Craftsman which would NOT work until I started with the door down, AND IGNORED THE ORANGE LEARN 3 TIME PRESS. Instead, I pretended it was the YELLOW ONE PRESS learn. The LED is yellow, so maybe these programming geniuses meant that??????????

[@GarageDoorGuy59]

Nice I love those keypads btw I have. That same opener super quiet keep it up bro👍

[@garagedoorgenius]

Pretty sweet keypad for sure. Same opener huh!? Niiice! And thanks, I really appreciate your support.

[@GarageDoorGuy59]

Btw I like your sound affects it's so funny😂😂

[@wellingtonsantos92311]

Worked perfect tks👏

[@garagedoorgenius]

Awesome! Glad to help. Thanks for the awesome feedback! 👍🏼

[@loukasmitskaris4380]

Great instructions!

[@garagedoorgenius]

Thank you!

[@nfavor]

I followed the directions and programmed it. It will open and close the door but the issue I’m having is that even if I wait for the lights on the keypad to go off, I can still go back to it, press enter (with no code) and the door still opens. Any advice?

[@LeNguyen-he9zo]

Very clear, easy to understand.

[@garagedoorgenius]

Thank you for watching 😊 Le!!

[@lisamuir2091]

Awesome! Thank you!!!

[@garagedoorgenius]

Glad to help, Lisa! 🙏

[@rando999]

thank you

[@garagedoorgenius]

🙏

[@jx14aby]

I don't have a learn button. All I have is a reset button. I'm so mad.

[@garagedoorgenius]

Hmmm ....what make and model do you have?

[@jx14aby]

@@garagedoorgenius I found it. I had to take off the front cover. Thx!

[@garagedoorgenius]

@@jx14aby 10-4 🙏

[@katherinecervantes3997]

So what do I do if my buttons don't have a color? I have the lift master medium duty logic and its more of a commercial one and is just a black button?

[@garagedoorgenius]

It's either a purple or yellow when you go to program.

[@EvanArtsy]

Niiiiice

[@garagedoorgenius]

Thanks man!

[@spitcool]

nice flamethrower ;)

[@garagedoorgenius]

I want one so bad now!! 🤘🏼🤪👍🏼

[@TheGangstaboy19]

Awesome video followed each step and it work for me

[@garagedoorgenius]

Awesome! Thanks for the positive feedback. 🙏