I love this video so much. Thank you. Can you give a link to the image you used? I like it and I want to recreate this following your tutorial so I am removing as many variables to get the same or similar effect.
@recentrelicsdesigns2 жыл бұрын
I dont mind paying for it (free would be nice though). I just want to follow something that has a known result to better understand how to make my magic machine to awesome things.
@ChargerDude70 Жыл бұрын
It was asked earlier but never addressed, could you please post where you got this .stl file from, purchased or free? It would be nice to have it for those who are new to this to follow along with.
@dowgy177 Жыл бұрын
Thingiverse is a good starting point for free models, although they're far more focused on 3d printing rather than engraving. Myminifactory is the same type of website but generally higher quality models with a focus on paying the creators. Yeggi is sort of a search engine for models that may help as well. Keep in mind most stls are distributed under a public license that forbids commercial use and reproduction without permission from the creator, personal/hobbyist stuff is a-ok though. Happy engraving!
@luismaymi28736 ай бұрын
Great video it provided me with some knowledge that I wasn't aware. Also where can I purchase a similar storage setup as in the 1:03 mark. I found the tags but I'm unable to find the storage or the focal sticks. I appreciate your time.
@Wousef19 күн бұрын
Would you not have to refocus the laser once it gets deep enough to where the beam is weaker?
@lightburnsoftware718919 күн бұрын
@@Wousef most lasers will have a usable range of a few mm, so unless you’re going very deep that’s not really needed.
@sherrithompson7574 Жыл бұрын
So with C02 can I follow same? When doing so I select grayscale, then does that mean I don’t need to use the STL2png converter? Also, cleaning pass, I hadn’t heard of this, wow! Can I get a starting point setting for that? I have 3 lenses 2” 2.5 and 4. Thanks for any input.
@chandrashekhar5143 ай бұрын
Want to know best laser source and other parts for 3d laser engraving.
@SantaDragon4 ай бұрын
What laser source power is needed to make this? 5:44 These "left-over" spikes looks horrible.
@qwestt1304 Жыл бұрын
Is this achievable with a 2d 50w mopa?
@smudgepost2 ай бұрын
What laser machine are you using please?
@traveler8696 Жыл бұрын
Why are there what looks like tiny mountains on the negative of the coin?
@EnriqueAlarconskywalker912 жыл бұрын
can i do this things with a diode lasser?
@lightburnsoftware71892 жыл бұрын
Not in metal, but possibly in wood, using grayscale mode and multiple passes. It will scorch a lot, so you’d need to clean the result with a brush, and you’d need a strong diode for this - probably 10w.
@yewenguo5 ай бұрын
Beside the standard Lightburn programme and subscription, what software and subscription do I need to purchase in order to have the '3D sliced' option appear for me to select in the Image Mode?
@lightburnsoftware71895 ай бұрын
You need to have a galvo device for this feature - that’s it.
@MrKillerdead2 жыл бұрын
For better 3d engarving we are need to rotate angle every pass, lightburn in 3d image rotate only 90deg every layer, need 10-12deg and clean all between deep layers. If you use short pulse laser you can polishing metals.
@lightburnsoftware71892 жыл бұрын
Rotation of images (at the moment) will cause the layers to misalign because of the way they are resampled, which is why it's restricted to 90 degrees. If you have an air source, like a compressor, blowing across the engraving it will eject all the metal particles and prevents them from getting burned back onto the surface, and this produces a much smoother finish all by itself. Cleaning passes can be done afterward, though we are planning to add cleaning passes during the engraving as an option.
@MrKillerdead2 жыл бұрын
@@lightburnsoftware7189thanx, how much layers i can use in 8bit images? 255?
@megstyle526011 ай бұрын
can you do video on just cleaning pass
@NicolásalejandroSilvavasquez6 ай бұрын
Hello, thanks for your video, a question. A normal flat engraving fiber laser can be converted to 3D engraving through the program or is it a different machine
@lightburnsoftware71896 ай бұрын
This is a normal, 2D machine. We don’t even have to adjust the Z to do this as long as the focal range of the lens is deep enough.
@hls1621 Жыл бұрын
Can this technique be used with the HP-3655 laser?
@SanyaUllah6 ай бұрын
Hi when you go on the stl2png what percent offset dept should i input
@fate202211 ай бұрын
where can I get that bee and honey comb stl file you used in the vide? I'd like to see the type of file dimensions that will work. Thank you for the awesome video.
@lightburnsoftware718911 ай бұрын
It is a paid model purchased here: 3dwave.us/products/bee-3?_pos=4&_sid=0783e848a&_ss=r
@fate202211 ай бұрын
@lightburnsoftware7189 cool, thank you very much.
@mrllblasi Жыл бұрын
Awesome!
@StevenCookFX9 ай бұрын
I am unable to get the 3d slice to work. All it does is produce a black preview
@lightburnsoftware71899 ай бұрын
The preview for 3D Slice is a little weird - It just shows all the layers at once. If you turn on "Show Travel Moves" you'll see red in the empty spaces of each layer, which helps visualize the result. I'd have you attach a screen shot of your settings, but you can't do that in KZbin comments - Please email support@lightburnsoftware.com if you still need help.
@CustomCraftedDesigns Жыл бұрын
Where do you recommend purchasing lenses for fiber lasers from and what brands are the best? Thanks
@lightburnsoftware7189 Жыл бұрын
lasersonly.com has been a great source for lenses. They have a fairly large selection of sizes.
@hectorflores6666 Жыл бұрын
hi, would the new PMG file create work with a Dio-laser?
@schmuckanfertigen994 Жыл бұрын
I can't find the 3d slice in my program. What am I doing wrong? Thank you very much!
@lightburnsoftware7189 Жыл бұрын
For starters, providing absolutely no information. :) 3D Slice is an image mode when using galvo devices on LightBurn 1.2.00 or higher. Which version do you have, for what kind of laser?
@alazouari11 ай бұрын
How to convert an image into a grayscale image for 3D engraving ? Do you have a tool or a software ? I am planning to use the laserpeacker 4 for engraving. Thank you !
@lightburnsoftware718911 ай бұрын
You don’t convert an image - these come from 3D models that are converted into height maps for engraving. The information in a normal picture is shading, not depth, so they are completely different. The laserpecker is likely not powerful enough for 3D engraving on metal. You might be able to get varying depth on wood, but diodes are not great for that either, as they tend to char more than vaporize.
@alazouari11 ай бұрын
Thank you for the answer ! Yes i agree with you but i was talking about engraving on plastic (TPU). @@lightburnsoftware7189
@coulterjb22 Жыл бұрын
Will this work on UV galvo lasers? If not now, might UV laser power be controlled in a future update?
@lightburnsoftware7189 Жыл бұрын
UV lasers generally don’t produce deep marks, but aside from that there is no reason this couldn’t work. It doesn’t use variable power at all - it does a single pass for every layer of depth.
@coulterjb22 Жыл бұрын
@@lightburnsoftware7189 Nice! Thank you. I'll give this a whirl.....new rabbit hole!
@GF-sp4sk Жыл бұрын
Is there a way to include a cleaning pass during the 3d etch or do you have to wait until the end? I was able to create the 3d image on the coin but waiting until the very end to perform the clean. I'm assuming adding a sub hatch in the middle of the 3d layer run will cause issues?
@lightburnsoftware7189 Жыл бұрын
There isn't a way to do what you're asking (and no way to do a sub-hatch to an image at present). We'd like to add this, but honestly I haven't seen a need for it yet. Using a small air pump to blow material off the engraved surface results in very smooth output for me, and doing cleaning passes after the fact has been fine.
@GF-sp4sk Жыл бұрын
@@lightburnsoftware7189 Thank you
@NicolásalejandroSilvavasquez6 ай бұрын
hola gracias por tu video una pregunta un laser de fibra de grabado normal plano se puede convertir a grabado 3d mediate el programa o es una maquina diferente
@lightburnsoftware75984 ай бұрын
This is a normal fiber laser - it does not require a Z axis or 3D laser head, but the lens must have enough focus range for the depth you want to reach.
@ghostk33per2 жыл бұрын
Hello lightburn, are there future plans for ezcad3 lasers?
@lightburnsoftware71892 жыл бұрын
Future, yes, but not near future. EzCad3 users already have 64 bit software and more functionality than EZCad2, as well as dynamic 3D focus and other features that will take significant time to reproduce. We *might* try to support just the existing LightBurn functionality for EzCad3 machines, if it’s not difficult, but at this point we haven’t even tried to see if an EzCad3 card will talk to other software.
@nateslocum99502 жыл бұрын
Just so I'm clear, this was done with a standard galvo? Not a 3d?
@korbx2 жыл бұрын
That's right
@lightburnsoftware71892 жыл бұрын
Yes, this is a standard galvo. Z axis is manual controlled and not moving during the entire engraving. This is why you want to focus the laser a bit beyond the surface of the coin.
@nateslocum99502 жыл бұрын
Awesome! Thanks!
@d1gp2008 Жыл бұрын
On bigger files how long does it normally take to get past the rasterizing/vector image part? mine seems to hover around 58% and seems to be stuck there
@lightburnsoftware7189 Жыл бұрын
This really depends on the file. Larger files can be resource intensive and a more powerful CPU will help. Lowering the DPI can help as well.
@floridalove Жыл бұрын
I did an update on my iMac yesterday to LightBurn version V1.2.03. And now under languages, the German language is no longer selectable.
@lightburnsoftware7189 Жыл бұрын
Thank you for letting us know. I have confirmed this on my end and have reported to the team.
@floridalove Жыл бұрын
@@lightburnsoftware7189 You're welcome.
@kwkwkwkbsksbehsjakagshsm-oy4eg Жыл бұрын
can i have a demo for lightburn ??
@lightburnsoftware7189 Жыл бұрын
Absolutely, we offer a 30 day free trial of our software. You can download it here: lightburnsoftware.com/pages/trial-version-try-before-you-buy
@osmankandemir6181 Жыл бұрын
Is there any possibility of move Z axis (of course it should control by software) every layer and process will run on real focus point on every layer?
@lightburnsoftware7189 Жыл бұрын
We will eventually add Z control, but you would need to measure how much material was removed with each pass and set the Z movement per layer manually. There would be no way for the machine to do this automatically.
@Bizill75 Жыл бұрын
@@lightburnsoftware7189 Could one simply add a stepper motor to their Z axis.. I don't have my laser yet. OR, I assume one would still need a motorized 2.5D controller setup which at this time we know cannot be used with Lightburn? I'm all kinds of confusing myself.
@chriswilson746 Жыл бұрын
what would happen if I just used a BLK/WHT photo PNG would the effect still not work? I get the stl to png idea with pure height but I know carveco/artcad does this method to make 3d engravings and they look fine. I do my work in AI so I can get really fine B/W gradients. I will have to play around Thank you for this great tool also my MOPA has a powered Z even throw it's an easy cad 2 board so that powered Z 3d carving would be awesome!!
@lightburnsoftware7189 Жыл бұрын
If you are just making greyscale depth maps with AI or carveCo then it should work exactly the same as the output from STL2PNG. For your Z axis you would need the controller to be able to control Z. My MOPA has a powered Z as well, but it's not ran through the controller it's just a switch on the front with a special stepper driver that generates steps based on a direction signal at a rate defined by a potentiometer on the driver.
@petrowi2 жыл бұрын
What's with this specific laser machine?
@lightburnsoftware71892 жыл бұрын
This is a 50W MOPA Fiber Laser. You can use a lower powered laser as well, and will just need to adjust your speed/power accordingly.
@mustafauzunpostalci86192 жыл бұрын
The site in the video is not working. can you give a link?
@TheLouisianaHobbyGuy2 жыл бұрын
You have to go to it from the link in the description lasertips dot org
@pfiltz Жыл бұрын
What I'm not clear on, is how to take a customer's logo, and get it into a 3D piece of artwork.
@lightburnsoftware7189 Жыл бұрын
In this case it started as a 3d model. Depending on the logo, you could use CAD software to extrude the logo into 3d space. If the goal though is to have a depth map then ultimately you want a 2D image that is colored correctly. This tool just takes a 3d model and generates that 2D depth map for you.
@franzghz1979 Жыл бұрын
Would be possible to do the same on a round object using a rotary tool ?
@danielkung58704 ай бұрын
GOOD
@franklicht98292 жыл бұрын
My Lightburn does not allow me to do an Apply Mask to Image. Its there but LB won't let me pick it. Any advice..?
@prcdslnc132 жыл бұрын
Are the shape you are masking with and the image grouped already? If they are the mask will not apply, ungroup them and try again.
@maxgul.x9 ай бұрын
I want to have a cleaning pass every, lets say 10 engraving passes. is that possible?
@lightburnsoftware71899 ай бұрын
In version 1.5 it is, set to release probably on January.
@ennisliu6496 Жыл бұрын
May I ask what software you use to edit this?
@lightburnsoftware7189 Жыл бұрын
The STL was already available online. All of the job configuring and running was done in LightBurn.
@ennisliu6496 Жыл бұрын
@@lightburnsoftware7189 thanks
@vdsmade2 жыл бұрын
👽👍
@lllantho2949 Жыл бұрын
so technically I could do this on a piece of wood right?
@lightburnsoftware7189 Жыл бұрын
If you have a CO2 laser you can just run an image in grayscale mode and it will do this, but not as cleanly as a galvo / fiber on metal.
@IceCreams622 жыл бұрын
1.2.02 !!! Not still available
@prcdslnc132 жыл бұрын
This works on every galvo version
@lightburnsoftware71892 жыл бұрын
You will need to have a galvo laser and the galvo version of LightBurn.
@bennyhill59702 жыл бұрын
My 50w uses BSL CAD. Can’t get LightBurn to recognize it. I use LightBurn for my diode laser and do have the galvo update install
@stevetaylor47772 жыл бұрын
@@bennyhill5970 Have you paid for the Lightburn Galvo licence to add to your diode one?
@prcdslnc132 жыл бұрын
@@bennyhill5970 BSL CAD is not supported yet. It is being worked on but not released as of 9-24-22
@poti2875 Жыл бұрын
how to start the stl2png? after uploading the file I don't see any button to click to start converting it.