LiitoKala Engineer Lii-500 Review

A very good battery cell charger that will tell you its capacity.
Link: bit.ly/2H72Q1p
Intro song used:
Track: CØDE - Duck Face [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • CØDE - Duck Face | Tra...
Free Download / Stream: ncs.io/DuckFaceYO

[@KonaChuck22]

You said the internal resistance of each cell is displayed in MEGA ohms. Should be MILLI ohms.

[@DougHnut]

you're right, it should be milli ohms. TIL

[@tomaszwaszka3394]

@@DougHnut ...and for AA, and AAA internal resistance always is 52 mR on display...is not measured....?

[@DougHnut]

I didn't notice that. I just check the charger on AAA nimh batteries and they all show 52 mR except for one at 50 mR

[@2kMario]

One of the best charger for the money you gonna spend.

[@lenguyenphi]

got one for 2 years now and totally happy ưith the performance !

[@KaloyanDobrev]

What are the reasons choosing this one over the Opus BT-C3100?

[@Flr3000]

Hi my friend, I'm from Brazil. Since I do not understand the language, I'm writing because I can translate. First congratulations on the channel. I bought this charger (Lii-500) and I still have a doubt: TALKING OF NI-MH AA BATTERIES After all, what's the difference between charger, fast test and nor test? The charger will charge the battery and in the end will show the value of mah that was charged What about the fast test and nor test? they will do what? will test and show the same value of mah that I would see if the charger were used. So I can not understand the difference between functions. If both fast test and nor test at the end load the stack and show the same charger information I ask: Why and when to use each of the two tests if the charger already loads and already shows the same information as the other two functions show? Just give me an explanation so that I understand hug

[@DougHnut]

Fernando Luiz thank you!. Fast test measures the amount of mah charged into the battery from empty. Nor test measures the amount of mah discharged from a full battery. Nor is more accurate but takes longer.

[@Flr3000]

Novamente agradeço a explicação mas ainda nao ficou esclarecida minha duvida. O que cada função faz voce ja explicou e entendi, mas tendo em vista que a informação na tela é a mesma (quantidade de mah) nao consigo entender porque usar uma a outra já que ate em charger essa quantidade ja sera mostrada. Pode me explicar?

[@Flr3000]

Again, thank you for the explanation, but my question has not been clarified. What each function does you already explained and understood, but given that the information on the screen is the same (amount of mah) I can not understand why to use one another since to charger this amount will already be shown. Can you explain me?

[@GM-ic7yi]

@@Flr3000 o normal teste é mais preciso por isso demora mais tempo

[@seba_diaz90]

Can you load all 4 slot at 1000 mA?

[@DougHnut]

Yes

[@seba_diaz90]

@@DougHnut but do you recommend putting a larger font? for example 12V 3A or 4A?

[@f4tboy99]

@@DougHnut But the wall adapter have only 2 Amps?

[@tomaszwaszka3394]

For AA, and AAA internal resistance always is 52 mR on display...is not measured....?

[@steveeb00]

I just got one. I tried charging some AA NiMH batteries. Unfortunately, I do not trust the Lii-500 to charge/discharge or test them. I was hoping I could put away my old AA/AAA chargers.

[@kay19833]

this or xtar vc4?

[@TheBlacktom]

Exactly, what is the difference between these two?