LILYGO® T-Display-S3 ESP32-S3 1.9 inch ST7789 LCD Display WIFI Bluetooth5.0 Wireless (clearer)

[@makersfunduck]

I recently bought this board, and in general it is a nice board. MCU is a bit faster and screen is more denser than the previous one.

[@MarkGreen-pp3qy]

i can't wait to get mine i ordered mine off eBay

[@brazed420]

Just got my one in the mail today so thought i got lucky with the new upload but i think ive bricked it

[@brazed420]

its just boot looping now when i plug it in my pc i just hear devise connected and disconected sound...bruh this vid nuked my shit man

[@LILYGO]

@@brazed420 please contact our customer service or email : [e-mail]

[@MarkGreen-pp3qy]

Do you have a windows pc

[@MarkGreen-pp3qy]

I hope it works for you I ordered me one to but it's a little different though it's the USB dongle

[@MarkGreen-pp3qy]

will it work with a Chromebook laptop

[@MarkGreen-pp3qy]

oh yeah I just ordered mine today

[@jerzy_nie_wierzy]

I just received 2 such displays, the first launch was successful. The first problem is that I can't connect to wi-fi, I don't know why. Secondly the screen does not display anything, it is slightly backlit. Out of the box, the screen displayed the logo and network scanning as normal. After uploading the code from github T-Display S3, the screens display nothing. The screens work after loading Nerdminer, so the devices are functional. I suspect it's a software configuration issue. I can't find a solution. I'm completely new and just learning.

[@rcarter]

One of the previous versions, the T-Display RP2040 still doesn't have a USB VID/PID assigned to it. Would you be able to get that resolved? This is preventing circuitpython compatibility.

[@LILYGO]

CircuitPython is not compatible with our TTGO series, Micropython is available

[@jstro-hobbytech]

Mine came without the firmware installed it seems. I can't get it to do anything. I just emailed sales.

[@LILYGO]

Our sales email is:[e-mail], please don't hesitate to contact us,thanks

[@dr3mta111]

me too

[@asifmahmud5437]

hello....i have some problem...when i upload code..my ESP32s3 screen is black.... 2nd problem is how to reset ESP32s3 display......when i turn on display the LILYGO logo not show please help me as soon as possible

[@LILYGO]

Check this link and try this example: github.com/Xinyuan-LilyGO/T-Display-S3/blob/main/firmware/firmware_no_touch.bin

[@GTA_CITY]

My esp32 S3 1.69 LCD is not showing as a device when I plug it in to my computer ? !!! Help !!! i have all the steps done up until the adding the github link to the drive but the esp32 S3 is not showing in my menu.

[@GTA_CITY]

I would like you to do a SETUP/HOW TO VIDEO for beginners from start to finish on The ESP32 S3 1.69 LCD, I want to make a smart watch with this and have it read heartrate, step count, calories, receive messages via bluetooth, web setup, etc. PLEASE and Thank You 😁🤯

[@GTA_CITY]

FYI nobody has made a video yet on this particular device yet.

[@bobbynegger]

How do I reset the lilygo s3. I made a recording and there was a problem and I already tried to erase the flash with the Esp tool, but it keeps connecting and disconnecting until I indicate the port quickly, otherwise it disconnects again. After connected and indicated the files it records normally. But I disconnected from the power, it returns to the normal position when I connect to the power, connecting and disconnecting. Nothing appears on the screen at all. How do I delete all data and leave it default to the factory? Thanks

[@LILYGO]

Re-burn the factory firmware: github.com/Xinyuan-LilyGO/T-Display-S3/tree/main/firmware

[@MarkGreen-pp3qy]

I can't wait till mine but I have a Chromebook

[@MarkGreen-pp3qy]

But i have a Chromebook laptop

[@MarkGreen-pp3qy]

I just ordered one

[@MarkGreen-pp3qy]

So do I just got to install the software on Arduino

[@MarkGreen-pp3qy]

I just got it but I got the USB one

[@MarkGreen-pp3qy]

I still don't know if I did it right

[@MarkGreen-pp3qy]

Can theses scan wifi in can they do bluejacking

[@MarkGreen-pp3qy]

I think I am having a hard time to

[@angelopellegrino7752]

Hi, Do anyone know how to use a free spi and what pin can be used ?

[@LILYGO]

PIN10, 11, 12, 13 can be used. please check here:github.com/Xinyuan-LilyGO/T-Display-S3/blob/main/image/T-DISPLAY-S3.jpg

[@IlIREDIlI]

Hi there! I have this board and it works great when powered through USB, but how do we power this board WITHOUT using USB? The schematics suggest it should be possible, but mine won't boot when I try and power it from the 5v pin (or from the li-po connector on the back) which normally works on the TTGO T-Display and other ESP32 boards. Any suggestions/help would be great. Thank you.

[@LILYGO]

Hello.Because of the low power consumption design of battery power supply, our engineers use it. GPIO15 and GPIO38 control screen backlight, you need to turn on GPIO15 and GPIO38 at the same time

[@bitman4204]

@@LILYGO How do I do that? My board doesn't turn on when I want to use the lipo battery connector

[@IlIREDIlI]

@@LILYGO Thank you for your reply, as these GPIOs aren't easily exposed on the board I guess USB-C power is the only option for me :)

[@LILYGO]

@@IlIREDIlI We will add these descriptions in the product details and github examples. Thanks

[@IlIREDIlI]

@@LILYGO ​ Thank you. Also, with the help of Volos Projects here on KZbin I learned that I should add these 2 lines in setup(): pinMode(15, OUTPUT); digitalWrite(15,1); ...I can confirm that the board works with power from battery or 5v rail. Thank you for your help ☺️

[@mis_hormigas]

ojo ojo nos juntamos y haver donde llegamos.................estoy muy solo

[@MarkGreen-pp3qy]

Can I install this with a Chromebook laptop

[@daytona1212]

So, where can we find the code for the flip clock?

[@LILYGO]

github.com/Xinyuan-LilyGO/T-Display-S3/tree/main/examples/factory

[@daytona1212]

@@LILYGO Thank you.

[@WaschyNumber1]

Is it now programmable over WiFi or Bluetooth without extra tinkering 🤔😳

[@LILYGO]

You can use wifi and bluetooth, and it can be upgraded through OTA. But it cannot be programmed directly via wifi or bluetooth.

[@fatihcemalcan3280]

This ESP board is very nice. Arduino installation worked for me (TFT_eSPI library is working for display). I want to use micropython. Installation process of micropython also worked. However, there should be another video to use display with micropython. Micropython library of display should be explained. Could you PLEASE publish a video for micropyhton with display?

[@LILYGO]

github.com/russhughes/st7789s3_mpy

[@MarkGreen-pp3qy]

can I use a Chromebook laptop to do this I just ordered me one similar like this

[@MarkGreen-pp3qy]

I just wanted to know will this work using a Chromebook laptop

[@MarkGreen-pp3qy]

I have the lilygo dongle usb

[@jluizk]

I can't install ide Arduino, many erros!

[@LILYGO]

What are the specific errors reported,please contact us via email: [e-mail],thanks

[@jluizk]

@@LILYGO I got it, but now I can't print on the serial port, even setting it to 9600 baud, could help me!

[@jluizk]

@@LILYGO the toy lasted two days, now windows no longer recognizes the serial port :-(

[@MarkGreen-pp3qy]

its just like that one but they are the same name

[@MarkGreen-pp3qy]

the one I have Don't have pins

[@Taki7o7]

Can i get a free board when cleaning your desktop? :D

[@LILYGO]

Sure,please come

[@MarkGreen-pp3qy]

I have the dongle

[@josemarchioli]

mina doesnt connect on the wifi

[@LILYGO]

please check this new video：kzbin.info/www/bejne/mJPGi2VpqdF7o6M

[@David_11111]

YAY

[@MarkGreen-pp3qy]

that's messed up

[@MarkGreen-pp3qy]

I can't wait to get mine I got to of them