Limited and revised edition - SANTA ANA at TRAFALGAR - Artesanía Latina ref. 22905-N

[@miguellarrosaquesada2980]

Hola Artesanía Latina, impresionante el Santa Ana, decirles que construí el San Juan Nepomuceno, el J.S Elcano y el San Francisco. Muy contento con el material de ustedes, felicidades. El Santa Ana es todo un reto. Saludos desde Sabadell 🇪🇦

[@artesanialatina1970]

Hola!! Estamos muy agradecidos por su opinión y esperamos que disfrute de este proyecto!!

[@DARIVSARCHITECTVS]

beautiful model. Nice detail in the windows.

[@spanishmasterpieces5203]

Los ultimos navios de vela antes de los vapores eran preciosos y obras de artes.

[@falconsCaptain]

Una maravilla

[@christopherkingsland4604]

Beautiful.

[@dnowa1055]

Will there be new instructions and illustrations?

[@joanmanueloliverovira4073]

Precioso !!!!!

[@artesanialatina1970]

Muchas gracias!

[@sergisagarra8347]

Precioso,pero ahora no podre adquirirlo. ¿Se sabe cuanto durara esta edición limitada?

[@artesanialatina1970]

Hola Sergi, la edición limitada durará hasta agotar existencias. No podemos decirle fecha exacta pero sí podemos decirle que no repondremos cuando agotemos el stock. Esperamos que pueda adquirirlo antes. Saludos.

[@fernandogonzalezmartin6718]

Hola, Vais a volver a sacar el Le Hussard? es un barco que en su día quise hacer pero lo descatalogasteis.

[@artesanialatina1970]

Hola, no lo anotamos para futuros proyectos. Gracias.

[@antoniogomezlopez7621]

Está excelente tengo una pregunta y espero y me ayuden a despejar mis dudas como puedo adquirir este modelo, qué precio tiene y en qué moneda fraccionaria está? Por favor alguien me puede ayudar?

[@artesanialatina1970]

Estimado Antonio, le invitamos a visitar nuestra web donde encontrará el modelo disponible. La moneda que se le muestre dependerá del país donde usted se encuentre.

[@antoniogomezlopez7621]

Muchas gracias por despejar mis dudas ese modelo me encantó y haré el esfuerzo por poder armarlo yo me encuentro en el país de México en el puerto de Veracruz

[@GregWilson635]

Just ordered it , beautiful ship!

[@AmbersCorner2.0]

Let me know how it goes Greg…

[@GregWilson635]

@@AmbersCorner2.0 I will indeed although I wont be paintng it. Hull will be Sapelli :)

[@AmbersCorner2.0]

Nice Greg!! I will be very much wanting to see that my friend!!! I am excited so excited. My wife told me I can’t purchase it for awhile…. Makes me very sad. I hope to see yours

[@AmbersCorner2.0]

Greg, where do you purchase your sapelli at??

[@GregWilson635]

@@AmbersCorner2.0 I have downloaded the instructions for the Santa Ana which says Sapelli is supplied with the kit. If not There is a store here in Australia where I can get it or you can buy the Sapelli through Artesania or even Occre.

[@modelman65]

Over Priced, out of scale, terrible plans & very cheap materials is what Artesanía Latina kits are today!!!!

[@artesanialatina1970]

Hi! We are sorry that you do not like the model. We try to be the most faithful we can. We are glad if you write to our email and give some suggestions. Regards.

[@AmbersCorner2.0]

Thank you!!! Very excited!! Will be doing complete build with sapelli and African walnut on my channel…

[@dv6en]

There's only plywood, sapelly, and birch wood friend, #Artesanialatina where's the walnut ?

[@GregWilson635]

Just ordered it , on their website it has some photos of it unpainted with the Sapelli hull . Looks beautiful 😍

[@dv6en]

@@GregWilson635 hull material is yellow basswood, theres not sapelli. Write anex information in instructions on website :)

[@GregWilson635]

@@dv6en instructions I downloaded from their website has basswood for the hulls first layer and second layer as sapelli. The photos on the website show the unpainted ship as sapelli. I'll know for sure when it arrives. If it isn't I'll just buy sapelli for it 😉

[@dv6en]

I don't know what to think about it. In the manual, playwood is 6mm as well as 6mm is keel hole, and in fact everything is made of 4mm plywood. I do not know how it will be done, there were a lot of errors and they add new

[@artsmodeldockyard8718]

Would have liked to buy this kit but instructions etc on a cd rom is a no go. Definitely need to bring back paper instructions and ship plan sheets especially 1/1 scale.

[@artesanialatina1970]

Hi Robert! You can download the instructions kit on our website, this instructions kit include plans. We hope this are helpful. Regards.

[@kuba91nt]

@@artesanialatina1970 where in the instructions on the website are the dimensions of the all wood pieces, because I haven't found it ?

[@jerzeyvermont]

This was a great company that unfortunately closed. Sadly the name was purchased and the reputation is being used to make some quick profit. The differences are many. Low quality wood only. just plywood and poor quality basswood. Poor quality castings and most brass replaced with white metal. No instructions at all. The 1:1 plan pictures will be conveniently missing as well. This is across the line of products hiding under the umbrella of the purchased company name. It is sad. If you want a quality model your on the wrong place. They will take every little fraction of your money they can squeeze out. Don’t spend your next year of creative leisure regretting the money lost to these greedy scammers pirating the memory of a lost good company. The Santa Ana is the worst. Cashing in on an old memory with terrible wood. They even say it. Claiming it is for the environment somehow. But no discount passed along to the end user for the money saved…. For the environment.

[@hispanosolvidados5634]

Esa popa debería estar ligeramente curvada, no plana, como se ve. Y las banderas están mal: solo había bandera rectangular en la popa. En la mayor portaba gallardete.

[@Paraplax-gj3ls]

Nearly 700 USD for a plywood kit? Really??? I would gladly pay 700 dollars for the old Santa Ana, but not this plywood ship..

[@gabachin]

Modelo precioso pero muy caro. Creo que me faltan muy pocos modelos por construir de ARTESANIA LATINA (y alguno repetido como el NEPOMUCENO). Mi intención era repetir tambien el SANTA ANA pero de unos años a esta parte a bajado mucho la calidad de los materiales, y la falta planos a escala tira mucho para atras a la hora de comprar modelos de ARTESANIA LATINA. montar este modelo con un lector de cds y una pantalla no lo veo nada practico. Pienso que con este sistema ARTESANIA LATINA no se va a recuperar.Tienen que pensar un poco más en el modelista y no tanto en el ahorro de papel. Pensadlo bien señores de ARTESANIA LATINA

[@artesanialatina1970]

¡Hola! Sentimos mucho su descontento, tratamos siempre de dar opciones a nuestros cliente y mejorando los detalles del modelo. En cuanto a las instrucciones, con nuestras instrucciones paso a paso en los modelos de nueva generación no creemos que haga falta plano pues se explica cada paso al detalle mediante imágenes o videos. Igualmente, Santa Ana tiene disponible varios planos que puede descargar desde nuestra web, al igual que todo el kit de instrucciones. Esperamos que esta información le ayude. Un cordial saludo.