Limitless TT01 RWD drift car conversion project-part5(TT01 무한변신-5)

About two years ago, I simply converted Tamiya TT01 into a RWD drift car using 3D printed parts.
This time, I plan to redesign many parts, including the main chassis, and tune them to the limit. However, stock parts such as driving parts, bearings, ball joints, etc. are used.
There is a center motor version and a front motor version, and they will be printed with a 3D printer.
Both allow sharing of realistic interior parts.
Check out Limitless TT01 RWD drift car conversion project-part1(TT01 무한변신-1) : • Limitless TT01 RWD dri...
Check out Limitless TT01 RWD drift car conversion project-part2(TT01 무한변신-2) : • Limitless TT01 RWD dri...
Check out Limitless TT01 RWD drift car conversion project-part3(TT01 무한변신-3) : • Limitless TT01 RWD dri...
Check out Limitless TT01 RWD drift car conversion project-part4(TT01 무한변신-4) : • Limitless TT01 RWD dri...
Multi offset 3 piece wheel kit : www.cgtrader.com/3d-print-mod...
Check out Multi offset three piece wheel(3d printable) : • Multi offset three pie...
Disk brake kit 3d files link : www.thingiverse.com/thing:538...
Check out Disk brake kit for 1/10 drift car : • Disk brake kit for 1/1...
Check out How to convert TT01 to RWD drift car-stage 1(TT01 후륜드리프트카 개조) : • How to convert TT01 to...
Check out How to convert TT01 to RWD drift car-stage 2(TT01 후륜드리프트카 개조) : • How to convert TT01 to...
Check out How to convert TT01 to RWD drift car-stage 3(TT01 후륜드리프트카 개조) : • How to convert TT01 to...
Check out How to convert TT01 to RWD drift car-stage 4(TT01 후륜드리프트카 개조) : • How to convert TT01 to...
Check out Update of Tamiya TT01 RWD conversion(front & rear hubs, swing arms etc) : • Update of Tamiya TT01 ...
약 2년 전 3d프린트 파트로 간단하게 타미야 TT01을 후륜 드리프트카로 개조하였습니다.
이번에는 메인새시를 포함한 많은 부품을 새로 설계하여 극한까지 튜닝하고자 합니다. 단 구동부와 베어링, 볼조인트 등의 부품들은 스톡파트를 활용합니다.
센터모터버전과 프론트모터 버전을 적용하였고 3D 프린터로 출력할 예정입니다.
두 가지 모두 리얼한 인테리어 파트를 공유할 수 있도록 하였습니다.

[@zeusgarage4368]

Check out HSP Flying Fish 94123 RWD conversion(stage-1, center servo &motor) : kzbin.info/www/bejne/jKvKm55ue8dghLM

[@naancar3956]

Good video! Please make RWD conversion kit for TT02.😊

[@zeusgarage4368]

Thank you. I'll make rwd parts for tt02 soon. I recently purchased a tt02 kit to make rwd parts.🤗

[@ezralineleyan6258]

Please do a drift video with the Hsp FF RWD on the new Track❤

[@zeusgarage4368]

I'll make drive video of HSP RWD conversion later. But this time, I'm busy for other ( TT01, TT02 RWD conversion project). Thank you.

[@user-jj2ws6td3t]

👍

[@zeusgarage4368]

🤗🤭🤗

[@Mordecosta]

awesome, really awesome, i bought a used tt01 to get into rc drift, at the momento im trying to convert it back to stock my tt01 because it was converted to 3racing mchassi and from what i saw on the stage 1, your mod only works on stock tt01(unless im wrong) but i already printed a stock tt01 base and im sure i will be drifting soon with my first chassi

[@zeusgarage4368]

Thank you. Both TT01 and TT02 are great chassis for drift modification on a budget. And it is surprising that even with a small cost, if you set it up well, the performance is not inferior to that of a drift-specific chassis that costs several hundred dollars.🤭

[@Mordecosta]

@@zeusgarage4368 in the end, what is your favorite setup of tt01? Just with the rwd conversion, rwd conversion with interior and rear servo or your latest with front motor?

[@richardanderson8585]

Very smooth driving. Your driving skill was ugraded with chassis.☺

[@zeusgarage4368]

Thank you.🤗

[@kizenakt.6651]

영상 잘 보고 있습니다. 개인서킷인가요? 처음보는곳이네요.

[@zeusgarage4368]

감사합니다. 게라지 지붕에 제가 직접 만든 테스트 트랙입니다.🤭