Lincoln Town Car: Driver Door Lock Stopped Working

In this video I have a look at a 2007 Lincoln Town car that came in and told me the driver door lock doesn't work any more and the alarm goes off when she opens it. Easy fix. -Enjoy!
If an SMA Video has helped you out please consider giving using "Patreon" to help support us. The videos take real time to create and pull us away from real work that pays our bills. CLICK HERE: / southmainauto
CHECK OUT OUR "SMA SWAG" STORE! Go on Teespring and get your very own SMA merch!
teespring.com/...
If you don't like Patreon feel free to use the "PayPal Me" link: www.paypal.me/...
The South Main Auto Amazon Store:
www.amazon.com...
AES Wave Automotive Diagnostic Tools: www.aeswave.co...
Thank you for all the continuing support!
--Eric & Vanessa O.
Feel like sending some swag to SMA because you love the videos but don't know where to send it?
Just ship it here:
South Main Auto Repair
47 S. Main St
PO Box 471
Avoca, NY 14809
Disclaimer:
Due to factors beyond the control of South Main Auto Repair, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. South Main Auto Repair assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. South Main Auto Repair recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of South Main Auto Repair, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained.

[@Michigan_Tactical]

Whoever said plastic takes hundreds of years to break down has never worked on a 10 year old car.

[@reecenewton3097]

Had a Mark IV Continental that just a few years old the plastic door panels started to rattle themselves to death, cracking all over the place. I was reduced to removing the panels and "fixing" them by epoxying on screen wire over the back of the cracks. The plastic was too brittle and the doors too heavy to work together for long.

[@throttlebottle5906]

10-years? more like 3

[@mlieser1230]

Remember the commercial where the last line was "Take a new look at plastic"? Every time some plastic clip or other plastic item would break, a guy I used to work with would say "Take a new look at plastic"! He also said "every thing is a hammer". I picked up his then new Fluke 88 meter and said "I can use this as a hammer"? He changed his tune right quick! LOL.

[@throttlebottle5906]

@@mlieser1230 I'd have said "sure", then used you as a hammer right afterwards without saying anything else ;)

[@hakon81]

Just as an information, that usually does not affect german cars as much as american cars. Call them "overengieneered", but at least they seem to keep up better over the years.

[@nicolasyannucci6984]

CAN you do a video on the Honda that smokes like a freight train?

[@tomtheplummer7322]

Hondoo

[@tomtheplummer7322]

The voodoo you do to a Hondoo

[@johnhubbard3399]

It's either valve stem seals or cooked rings.

[@bigpatrck2]

Diesel in the tank?

[@3sierra15]

Head gasket.

[@UppyJC]

The three rules of engineering apply equally to mechanics: 1) Always use the right tool for the job 2) The right tool is always a hammer 3) Any tool can be used as a hammer

[@throttlebottle5906]

4) If all else fails, use a bigger hammer!

[@ralfie8801]

throttle bottle Yep, break out the BFH! Big nasty comes to mind also.

[@notajp]

“Every tool has a hammer side!”

[@markh.6687]

Primitive Pete approves of Uppy's message. Shop teachers, not at all.

[@fillg]

The only thing that would've made those wood screws better is if one of them needed a flat blade screwdriver 🤣

[@johnnysteel442]

LOL! I've seen that before. Monro muffler does crappy work like that.

[@edwatts9890]

Nah, stripped-out Phillips screws would have been better. And more likely! (Ask me how I know...)

[@emilschw8924]

@@edwatts9890 Baaaah, had a stripped out philips on my Sharan's alternator regulator. Was fun unscrewing it....

[@neilmurphy845]

@@emilschw8924 or the star ones there fair annoying when they strip

[@austinlamberson5648]

@@johnnysteel442 ive worked for a shop owned by monro and we did quality work it depends on the techs and shop management

[@shauno3697]

I couldn't help but laugh when Eric twice threatened to read service info and then didn't. My experience with service info usually works like this: Hey service info, how do I remove the interior door panel? Service info says, "Remove interior door panel." Me: Yeah, but I'm asking you how. Service info: Yes, remove interior door panel.

[@CubasAutomotive]

Step 1.... remove the 2" wood screws. Lol

[@terrycullender123]

I have the older manual. Step #1? Drain the radiator. Hmmm...

[@TreyCook21]

But installation is the reverse of removal... so there's that

[@tomoakhill8825]

That is a quote from every Microsoft so-called "Help Page."

[@TreyCook21]

@@tomoakhill8825 Unplug your door panel and plug it back in.

[@jwboilermaker]

I’m disappointed that there wasn’t the patented Eric O, “well there’s your problem lady!”

[@Michigan_Tactical]

Or brake kleen lol

[@halleffect1]

@@Michigan_Tactical or "good enough for the girls I run with" or "safety third"

[@alanhanniffy8177]

Should be compulsory every video, I love it 😀🇮🇪

[@Michigan_Tactical]

@broomsterm that he did. He's naughty when he works outside. 😆

[@Mrflash222006]

This video was a double entendre mine field

[@michael931]

Starting at 11:00....

[@dominickbitsui9596]

Loved it!

[@davidrobins4025]

"Happy as a clam at high tide." (The clam is safe from being dug up and sits waiting for "food" to pass by)

[@crisprtalk6963]

14:25 you know Eric is upset when the S bomb comes out.

[@troycarothers8254]

He wasn't within hearing distance of Mrs. O and the children, so it came right out!!

[@tncountryboy06]

lol anyone who has worked on a car a day in their life has cussed and/or thrown wrenches

[@macdonaldsmotorworks]

@@tncountryboy06 if you can't swear for 10 minutes without repeating yourself you just shouldn't be working on most cars I believe....

[@renwin83]

Came for the repair, stayed for the innuendos.

[@markh.6687]

"The rod goes in the pink hole." And then Eric fixed the car!

[@DmanLucky_98]

@@markh.6687 and a ding dong was already in here broke something off

[@BobY52944]

@@markh.6687 And then Eric shows us the pink hole. Where was Eric when I was 16.

[@joshuabest100]

And then he put the flapper back in place for the lady

[@larryverriden4493]

@@markh.6687 Door repair and sex edgemacation - A2fer

[@shawnhergett6900]

At least you work on cars I watch the car wizard never shows him working on anything.

[@codycraven3516]

Agreed. Car Wizard shows all the things he has or will work on but we never get to see the process.

[@tonypacke6954]

@@codycraven3516 That's because he's now got two guys to do that. Too busy on his boat now.

[@parteibonza]

@@tonypacke6954 yah wouldn't it have been nice to see them go through those boat motors and show how to take them apart, and replace the pieces that were seized, etc? But no, he just described what was done with them laying already completed on the floor.

[@nukemanmd]

Shawn Hergett - it is because Junior Mint does all of the work. The Wizard is too busy shopping.

[@fmattbp]

Relax people, it's just a diferent format...

[@unknown_warrior_]

Good job. I own 2007 Lincoln Town car. These cars are made to last for years. I currently have 401000 miles on it. Still strong and running wild on the roads. I will probably buy the last year production model 2011 next year. Low mileage hopefully can get black on black.

[@ganeshnarayan5505]

My wife just yelled at me so i'm watching S.M.A. for eighteen minutes.

[@afightforfreedom5381]

People need to stop judging you, you have great character you seem to be a pretty good mechanic and fair all around great person far as I can see, get r done

[@Yawwee]

WHAT ???? Who would dare to judge the greatest mechanic in Avoca, New York ?????? Truly it's the competition who leaves these snide remarks !!!! Them "others" that don't tape the harness back up, forget to put the screws back in, and tear the waterproof paper door sealer, that's who !!!!! No cheap ass, shortcut taking, guessing, shotgun parts person, Dorman parts user could ever measure up to the SMA's Eric O. !!!!!!!!!

[@johnghatti5435]

If I’m wanting to watch a great repair video it’s both Erics. SMA channel is something I’ll watch without needing to repair anything just because he doesn’t ever cut corners and his sense of humor is great. Truly glad I found this channel.

[@thomasfletcher4765]

" kicked out of my own shop " , time to put the iron foot down ( I mean lead foot 🤣🤣🤣🤣 )

[@ronobrien7187]

Either I must have a dirty mind or Eric loaded this video with double entendre'.

[@shauno3697]

Yes and Yes.

[@markh.6687]

Yes to both.

[@highrzr]

"Wiggle the tip around to found out where you're at." I love it as my mind went some where else...

[@mark98070]

Some other Ding-Dong has been in here. Lol

[@gianfrancoa]

"The hole is pink, in case you haven't seen one"... lmao

[@parteibonza]

😂😂😂

[@unicorn7337]

This along with 'Let me just see if I can feel the hole... I probably can, I'm still pretty young' almost made me spit out my coffee! 😂 Eric is the king of puns! 😆

[@Strongman2474]

I absolutely did spit up my coffee.lmao🎯😂😂😂😂😂😂😂😂😂😂😂😂

[@dannywilliamson3340]

"Wiggle the tip around 'til you find out where you're at." Ms. O must have been on a road trip or something.

[@austindakotamillsaps1132]

He has enough children to know where the pink hole is. Guessing he was curious about the dark black hole.

[@giggiddy]

I remember those pull straps being junk way back when. In the 70s, I swear they weren't screwed to anything and would fail immediately. Such a simple concept.. Not sure why they are still used and still fail.

[@stevenreynolds2327]

the problem is, a lot of idiots grab them, push the door open to its limit, then pull on the strap as hard as they can till the door slams , and they are still pulling when door crashes the latch

[@parteibonza]

@@stevenreynolds2327 if they would just have the hinges replaced that would fix the problem of having a door that you have to slam like the hatch of a battleship. It should be a polite close. its funny how you need to teach little kids NOT TO SLAM THE DOOR.

[@johnderryberry8456]

Poor quality for decades, GM the skid mark of excellence.

[@michael931]

@@johnderryberry8456 true but that was a Lincoln...

[@jdrs4214]

I would also notice that common strap problem on old GM trucks, and ‘burbans.

[@CubasAutomotive]

"Are clams really happy?" Hmmmm... I'd say it really depends on the clam. Lol 😆

[@jamespn]

If they’re not in chowder, I’d say so.

[@jefflittle4013]

Happy wife, happy life. Just need to keep your wife's clam happy.

[@jessicarabbit3364]

yeah. I'd say as long as they don't smell fishy.... lol. 🤔😂😂😂 🦪🦪

[@onestepatatime2346]

@@jessicarabbit3364 Yikes!

[@weldingjunkie]

Depends who’s shucking them 😂😂😂😂

[@ronaldanderson9263]

Rod knock. It will be back. Do the smokin like a freight train coolant in the combustion chamber that came in on a flatbed video.

[@LtBRS]

That's what I really like about your work. It's always put back together to factory new or better.

[@justsumguy2u]

"You might have to wiggle the tip around until you find out where you're at"--that's solid life advice, folks

[@markh.6687]

That's what she said!

[@alant5757]

FYI: SMA... I have family in Germany and every year Wera tools puts out a Christmas advent calendar where everyday in December you open a door to reveal a small tool. And eventually you have a small tool set. Kind of like what you are using in the video. I got one last year and it was totally awesome. Not sure why Home Depot doesn’t do something like that. They would sell out unbelievably fast.

[@markh.6687]

Home Depot isn't as sentimental as Wera, or doesn't want any grief from anyone complaining about where the HD Kwanza/Passover/Greek Orthodox calendars are.

[@robv7340]

LIDL sold something similar last year in the UK and I had to have one lol

[@wallyg4445]

if you can, let us know about the smoking hondoo!

[@macdaddyns]

Love the way you treat all jobs like it’s your own car!

[@freetolook3727]

Are you kidding!? Have you seen his jeep video?? Mechanics cars are like the cobblers kids who go with holes in their shoes.

[@leedress2187]

Putting a Ford door panel back on... the struggle is real...

[@hotrodpegleg]

every tool is a hammer and every screwdriver is a prybar baby

[@FBobby]

We're all judging you on all that previous damage Eric. -.-

[@paulstan9828]

I use to work on the assembly line at Ford. Nothing worse than working inside the doors.

[@SmartSped1984]

I can believe that. I recently had to replace the window motor in the driver door of my 89 Town Car and that was a frustrating nightmare. Not only did I have to deal with the power window to get the regulator out but the power vent window as well and each window has it's own bracket and multiple tracks that the regulator fits in. Worst power window I've ever worked on and I'm praying my passenger window holds up for a long while.

[@paulstan9828]

SmartSped1984 I know your pain. 😁

[@reecenewton3097]

Anybody who's worked inside of doors replacing window motors, etc., will have the bloody scars to show it.

[@paulstan9828]

Reece Newton Ha!!!! Man that’s true. I had cuts and scratches. Plus a black and blue line on my but from sitting on the metal seam at the bottom of the door opening, before any plastic trim or carpet was installed there.

[@SmartSped1984]

@@reecenewton3097 For whatever reason, Ford likes to sharpen the metal for that small access hole they give you.

[@davidgriffin14]

Hey gringo..... 2 is dos, not duo. No judgements! 😆 lol

[@throttlebottle5906]

perhaps he needs a duo-ver

[@markh.6687]

@@throttlebottle5906 You should leave comedy to someone else...anyone else, really. :)

[@boondocker7964]

Well, how many do's are in a does?

[@markh.6687]

@@boondocker7964 (singing) "And that brings us back to DOH!!"

[@christen1075]

I got a '07 Lincoln and need to replace the DDM (Driver's Door Module). Great primer on how to remove the door panel. Just saved me a boatload of time. Many Thanks!

[@DaddyBeanDaddyBean]

We had a 2008 HON-DOO Odyssey with the auto locks that engage at 20mph. When it was cold outside, say mid-20's or below, it would trigger the locks five times in a row. The driver's door lock had a third wire in the connector so the computer could detect the lock state; apparently when it was cold, for whatever reason, it read "unlocked" even when it was locked, and would try five times before giving up. To fix it, I found the OEM part number online, found the best price I could find on the OEM part, and then totaled the van and bought a new one.

[@markh.6687]

Well, that's one way to solve the problem. :)

[@DaddyBeanDaddyBean]

@@markh.6687 Effective. Not recommended, but effective.

[@adamsmith1470]

Some of your videos are great CYA videos for when some customers “forget” what things are broken on their cars especially on door panels and dashboards and other interior parts that are easily broken. Love it when I see an upload from you! Hope to see some “normal” day at the shop videos!

[@skylarreid1284]

Hey Eric, would a bad computer cause all my injectors not to work? I checked all wires, fuses, and relays. Multimeter shows power getting to injectors but I still have P0201-206 (05 Grand Prix GT)

[@zackarymcclain164]

Damn I haven’t been this early since before SMA blew up.

[@NickMyers1]

The door panels on these 2003-2011 Town Cars are such garbage. Car is substantial, well designed, over engineered, will drive 500K miles...and the door panels cannot take one ounce of abuse. I've plastic welded the tabs back onto the door panels. I get spare grab handles since the plastic retainers always break off. Junko. The rivet breaking off was common on the early build 2003 models - had two cars where it broke off and did the same thing from Ford using a weaksauce rivet. Not seen on a later - probably prior respray where they gutted the door cavity and put back on a cheapo undesized rivet for the lock. Grab handle screws - long to the rear, shorty in the front. A+ work as usual!

[@igamehard8860]

You know your stuff. Early 03 owner. Both front doors have this prob now

[@steveo6631]

The only explanation for a thumbs down has to be from competing shops and competing youtube channels I figure... Its always the same amount of haters for each video... They can't accept being second fiddle... That's their problem, ladies......

[@jarad0714]

Thank u for the videos. Love watching your videos makes me wish I could be a full-time mechanic please keep them coming and I will keep watching them every time I get a notification.

[@dpmautomotive1758]

No you don't it's a rough way to make a living

[@hugglescake]

Perfect cover: Old lady car thief.

[@woodworkerroyer8497]

"OH, Sonny, can you help me get to my Ferrari over there? What do you mean? I am offended that you imply I'm too old to drive a fast car. What are you, AGIST?!

[@crackone2three]

I always like that we get some German (even we are in Austria here ) stuff....Schmutz and Schlitz...feels much more like Home :D

[@reecenewton3097]

Even more of that sort of lingo down here in the Pennsylvania Dutch area.

[@tracymessineo4738]

How is Hannah and Marie doing these days? My husband and I were watching an older video when they were replacing the brakes.

[@zupmeoff]

30 sec rivet, 2 hour door panel reinstall, lol

[@markh.6687]

It's always like that. That's why I sometimes wish I didn't enjoy trying to work on or repair things.

[@thecooldude9999]

My crown vic did the same thing this summer. Replaced the rivet with a bolt, works great now. Free fix.

[@cdrbilldickupusnretired4349]

"Every tools a Hammer" 😂Great video today Eric. Love the videos and the family stuff. Got some great South Main Swag... My family was from Boonville so I feel at home watching Up State (the real State) New York...

[@stealthg35infiniti94]

Good job in taking care of that door...It's unbelievable that Ford used a rivet to hold that actuator...The actuator should had a nut plate, thus you just would insert a screw from the side of the door.

[@bigb7157]

1/4” rivets aww. I deal with some 10 mm jokers that are a two person deal. Made cheater bars for the manual rivet nut gun.

[@Bobbyjwmwb]

Good for you 👏

[@ralphadams4478]

I have a 2003 lincoln,would like to you find out why air bag light is on ,on another one if you ever get one,and why door locks go up n down by thier selfs while driving

[@tspbod260]

I'm not sure if I watch for the informative info or the awesome commentary. Someone else's meat nuggets. " OMG! That was funny.

[@MatthewBarras]

Its very common on Crown Vics / Grand Marquis also.

[@boondocker7964]

I had a '86, Grand Marquis, new off the lot, I expected a bit more quality than I figure I got. Dummy me. Kept it 11 years, got a new F150 from the factory, never do that again.

[@kennethbode2017]

Lincoln door panels haven't changed since the 80s. Still junk

[@boondocker7964]

Yeah, expecting some sort of quality for the money you pay for those heaps. What's the matter with folks?

[@colintrout1095]

OMG has nobody seen the bug come out of the door panel,land on the ground and fly away,bottom right 6:04

[@jordydereus]

How many Not Sponsors do you have?? ... 😉

[@jimhaines8370]

I have had a number of those broken over the years, I figure its due to un-plated aluminum rivet with steel washers and steel bracket just add a little water and salt and let nature do the rest

[@AntonioClaudioMichael]

Good video Eric O @SouthMainAutoRepairLLC

[@anderleof]

Looks like the driver's door module is missing a second screw. Did you miss that?

[@SharkDude1]

Thanks for showing me where the pink hole was. I have been looking for one for 6 months.

[@neilshep50]

I lost count of the innuendos when I ran out of fingers and toes 🤣🤣🤣🤣🤣🤣🤣🤣

[@Spillmansgarage]

Looked under its skirt and gave it the classic reach around. Damn Eric!

[@markh.6687]

I'm gonna have to throw a bucket of water on you if you don't calm down!

[@dozerman53111]

I don't think I worked ever inside a door without my arms looking like I had a fight with a bobcat. Your skin must be tough as a elephants foot !! Just kidding, another great video.

[@noeygarza6522]

My knees are killing me just by seeing you! OUCH!

[@richardmiller5238]

Do you ever ask, "hey lady who worked on this?" Prior to you actually repairing? Seems like you are repairing others screw ups along the way to you repairing.

[@brianglade848]

My dad installed a toilet in our living room just so he can watch your show

[@joel.3112]

There being judgemental he says!! When the car alarm is going off. Lmao SMA!

[@throttlebottle5906]

anymore, car alarm going off = why did that idiot set off their own alarm again ;) nobody bothers to look or pay attention to them anyway

[@joel.3112]

@@throttlebottle5906 😅

[@ivanetherton8514]

That’s one of the best video I’ve seen to detail ! Great job👍👍

[@JoesAutoElectric]

Did I hear you right??? Did you say a bad word? What is going on ...oh wait..2020!!! I almost forgot!

[@johnnewmyer3858]

That is an exact replica of every door that I have ever tried to fix, after I have broken 50% of every fastener it contains with my meat nuggets.

[@paulchambers6657]

Wiggle the tip around 😂😂

[@Charles_Mulberry_7977]

13th...My Pappy said "Son, you're gonna' drive me to drinkin' If you don't stop drivin' that Hot Rod Lincoln"

[@fillg]

Son you're gonna drive me to drinkin if you don't stop driving that hot rod Lincoln

[@Charles_Mulberry_7977]

That's exactly what I was thinking but couldn't remember the exact words.

[@fillg]

@@Charles_Mulberry_7977 good stuff 😎

[@mobes329]

I like that song.😆

[@maingun07]

That's one of the things I like about Fords. The door panels are usually fairly easy to get off. Had to pull the door panel off my 93 Caprice. It's still not sitting right because I broke 3/4 of those stupid tabs.

[@steveo6631]

Ginger Lee.... thats the name of my stripper...

[@KevinJohnson-fx6wq]

I saw one guy, car wizard who learned a long time ago to keep the driver's window down while working on the car so you can't lock the keys in the car by accident. I know that really sucks when that happens. Been there & done that, lol. Thanks for sharing.

[@rustybrowneye]

You forgot to put the hydraulics on it before it left

[@stevenwbaker56]

Ya did a great job teaching the repair. Thanks for being aware of the camera position, close-ups, etc. Really helps. Also mentioning the parts & where to buy. Good Job.

[@murph9813]

That Lincoln must have been a woody at one point!

[@tiredagain6722]

You are the victim of your own success. There are worse things than having a busy shop!

[@JasonTheMunicipalMechanic]

That must be some of that green plastic. The kind the decomposes before you done using it.

[@beyonddeath123]

stick the rod in the pink hole... annnnd demonitized

[@DonBMW]

Great to see a pro struggle with that panel. I’m a hobbyist and always thought it was just me struggling with panels when servicing regulators and door lock actuators.

[@spunashell]

Hey man! On the door panel it seemed to be a lock and a push button on the lower right side. What are they for? /D

[@igamehard8860]

The 2 buttons on the bottom of the door are for gas and trunk release. On some town cars the trunk button will close it as well. The buttons on top right are heated seats and driver seat and pedal memory

[@ashleigh42186]

Eric, love the videos, I'm a mechanic by trade as well, and am fortunate enough to work in a fleet situation where all my tools are purchased for me, and price is not really an issue. I also do a lot of side work from home where obviously every penny counts. I've seen in a few of your videos you mentioned a brand and part number of tools you are using. Would you consider doing a toolbox tour of sorts or tool reviews? I would love to hear and see what tools other than the big brands you use, and how they work for you. Thanks in advance, keep up the great content.

[@chrisfreemesser5707]

Eric cussed...25 cents in the swear jar!

[@markh.6687]

Wait Eric; I gotta put about $5 worth in first.

[@aMMoNCO]

Almost everything I fix is because someone has touched it in the past. Mechanic or customer.

[@billyyoder8171]

Thank you Dr. O. Those WERA sets are top dollar. Have a blessed and safe week to you and your family.

[@edwatts9890]

I "pop" those window regulator rivets by hand, but I have a tool with handles like one might find on bolt cutters.

[@timrowe8123]

When your only tool's a hammer...every problem starts to look like a nail

[@CrudeOilisOrganicYouKnow]

The fit and finish of the Model 3 is just terrible for the price. Said the guy with his Detroit colored glasses

[@leepennington4649]

“In case you never seen one” 🤣🤣🤣🤣🤣 Well played Mr. O

[@hdomka]

Life is insane. I just replaced the EXACT same switch in my Lincoln Town Car literally two hours ago. Shivers down the spine.

[@nickidewet7711]

So it was your botched job he fixed 😁

[@igamehard8860]

Google definetly isn't watching you..

[@benjaminstockton3917]

Very good job Eric O. You take pride in your work very awesome

[@stephenjohnston9289]

Hot as a Banshee, tight as a Banshee and now windy as a Banshee! The Banshee is a multi-tasker! 🧟‍♀️

[@salceti]

just about everytime I watch an SMA video I pickup a tip or a tool to look into, or even one to make DIY like the wire/alligator clips to hold wires ( not in this video but from the GM dealer sucks, warranty ABS brake sensor) while soldering in place. Think I will make one today, be prepared so that it is ready when I need it. Thanks Eric

[@crisprtalk6963]

true... there is always something to learn in his videos especially for the DIY guy.... it might be something very small that you never thought of or a major thing.

[@salceti]

@@crisprtalk6963 I did make the jumper today like I said I would, now I will have it wwhen I need it.

[@bellezayverdad]

"Numero duo" I'm afraid that's not Spanish, mate. Thx for the gesture anyways.

[@johnp556]

That's Spantalian.

[@davidwalle5025]

Looks like another wobo job (worked on by owner) wobos cost more. Good video mr. O.

[@Mike_Engel]

Eric O... You are the best... Thank you for continuing to make these videos Really enjoy them

[@salvadorgutierrezr5914]

Numero #1 , thanks for teaching Mr. Eric🙏🙏🙏🙏🙏great ,but very great video👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👌👌👌👌👌👌👌✌👋

[@donnierobertson3088]

Nice job and video like always

[@KevRalph]

Numero "duo" Spanish...LOL

[@SmittySmithsonite]

You found SCHLITZ in the carpet? SWEEET! I'mma have to start drinkin' again! :D Boy have those vehicles gone downhill! My Grand Marquis was 25 years old before the first door lock solenoid failed, and 33 years old when one solenoid lost its rivet like that Stinkin' Lincoln did. I still have all 4 original window motors. One of them has 3 lead .45 bullets for the drive mechanism. Works great! :D :D The plastic only recently started getting brittle - within the last 5 years. She's gonna be 35 in a few months! I'd better find her a husband ... ;)