Lindr Beer Tap Cleaning

We show you step by step on how to clean a Lindr Beer Dispense System tap.
Cleaning the tap is only required every 2-3 times you perform a line clean and can help with a better quality pour.
For further details please call us on 01484 340800 or visit www.brewfitt.com

[@kellicrosby7249]

So helpful!! Thank you!!

[@fakeerj.2427]

Miloši a co používáš za čistící prostředek na výčepní kohout a výčepní sklo

[@neilbirkett1414]

Brilliant video,can you use silicone grease on the o rings,mine is still stiff after cleaning thanks.

[@BrewfittLtd]

If the tap is still stiff after a clean it might be that there is still some residual dry beer in the tap body causing the mechanism to be stiff. To reduce this we would recommend opening and closing the tap a few times while in the solution so the fluid comes into contact with everything the beer touches to free this up. Also - If the unit has been stood for any length of time the seals can become dry and stiff but after a few open and closes it will free. You can use grease if it is really stiff but you must ensure it is food safe and plenty of water is flushed through before connecting onto the beer to ensure nothing ends up in the product.

[@neilbirkett835]

@@BrewfittLtd it's the first component that's the problem, I have to physically knock it out with something heavy, same on reassembly, all looks clean internally, seems the o ring is too big thanks.

[@BrewfittLtd]

@@neilbirkett835 Hi Neil, we would advise you contact our technical team as this seems unusual, you can reach them on 01484 340800,

[@timothy4]

Do Nukataps fit this unit?

[@BrewfittLtd]

Hi Tim, the Lindr unit thread accepts 5/8 fittings. You may have a speed of flow issue unless you have a compensator fitted. We would recommend speaking to our technical team on 01484 340800 do they can offer the best advice.