Linn Majik LP12 Complete Build at Ripcaster

See a complete build of the Linn Majik LP12 turntable. The video shows the complete assembly of all the component parts at ripcaster.
The Linn Majik LP12 in the video features a custom finished plinth and the Koil moving coil cartridge.
See the components of the LP12 at expert.ripcaster.co.uk
00:00 Introduction to Linn Majik LP12 build
00:30 Look at the Linn LP12 components
02:16 Spares and Components - 3D models expert.ripcaster.co.uk
02:42 Build Start
02:45 Preparing the LP12 Plinth
03:32 Hinge Backplates installation
03:50 LP12 Top plate installation
04:24 Belt guide installation
04:37 Motor speed adjustment screws
05:00 Fitting Top plate assembly to the LP12 plinth
05:36 Sub-chassis assembly
06:00 Armboard installation
06:25 Linn Karousel bearing installation
07:14 Linn Krane Tonearm
07:55 Fitting arm collar to armboard
08:33 Linn LP12 jig
09:03 Sub-chassis installation in the plinth
09:40 Fitting LP12 Suspension components
11:15 Cross-brace/wiring strap installation
12:03 Majik LP12 Earthing strap
12:20 Majik LP12 power switch installation
12:45 Linn Majik Power Supply
13:10 Secure Majik Power Supply
14:00 Motor Installation
16:10 Mains Cable Installation
16:52 Signal Cable Installation
17:40 Signal Cable P-Clip, clamp, O-rings
19:13 Cable clamp and O-rings fitted
21:00 Signal cable earth strap
21:20 Turn over the LP12
22:00 Fill Linn Karousel bearing with oil
22:14 Inner Platter installation
22:55 Belt installation
23:31 Tonearm cartridge and counter weight
24:00 Tonearm geometry check
24:30 Krane Tonearm fitting
24:40 LP12 Outer Platter
25:00 Lp12 Suspension calibration
25:16 Krane Tonearm signal cable
25:35 LP12 Suspension adjustment
28:00 LP12 Speed calibration
29:00 Baseboard installation
29:53 Baseboard earth connection
31:50 Feet installation
32:00 Build Completed
32:38 Typical Linn LP12 setup with speakers and Selekt Network Music player

[@peemsta]

Brilliant video. Would like to see a similar video with a Klimax LP12 to see the comparison in engineering.

[@ripcastercouk]

The plan is to do one for each: Klimax LP12, Selekt LP12 and Majik LP12

[@edbrumbaugh9202]

Enjoyed the video, really liked seeing the breakdown of what makes up the turntable. Thank you.

[@brianparkinson1594]

Super informative video! Did not realise there is only the single speed 33rpm.

[@ripcastercouk]

Hello Brian, The Majik LP12 is supplied with a manual speed adapter for 45rpm - but it is a bit of a faff to keep changing. See ripcaster.co.uk/Linn_45rpm_Adaptor_for_Sondek_LP12_Turntable_50hz

[@larrykenner8095]

Ya know I thought I always wanted a Linn until right about when I saw the motor speed needs to be adjusted with two screws … that’s after I already reluctantly came to terms that we need to assemble this whole thing… this man has patience enough to work on a bomb disposal squad… I’m speechless…. So it’s up to the dealers to assemble this whole thing? Really?

[@Michael-xz1nk]

Always love seeing Linn video’s. As a dealer, you should definitely do more of them. YouRube is short on Linn video for some reason. I had 3 LP12’s over the yesrs until I went 100% streaming. I always had the aformosia base but this new color is awesome!!

[@ripcastercouk]

Thanks for watching... The plinth in the Majik LP12 build is a custom finsih - you can choose any colour you like.... we have plenty of Linn videos on our channel. Maybe take a look at the one we have on all the different plinth options here: kzbin.info/www/bejne/b3zYiWOPbayAndE

[@Michael-xz1nk]

Thanks!!

[@tonyjedioftheforest1364]

I love that colour. I didn’t realise that the dealer had to do the complete build, no wonder Linn love their dealers! I bought one as my retirement present last year and absolutely love it and my dealer came and installed it and took a couple of hours to listen to some of my music collection. That’s what I call customer service. I wish Linn would do an official budget 2 speed power supply similar to the Hercules as I don’t like the faffing about involved with the adapter. In fact I use a second deck a Linn Basik with my old Ittok and K9 for my 45’s. A third deck a new Rega P3 is used as well with Audio Technica’s AT610mono cartridge for my growing collection of 1960’s mono records. All wall mounted so that they all fit nicely together. Great video by the way.

[@ripcastercouk]

The plinths are available in any RAL (or automotive finish). This happens to be a VW finish - Bay Leaf Green. Automatic speed control on the Majik LP12 would be a good idea... but the current manual methid is also a good motivation for the Lingo IV upgrade. We have another video on the channel that covers the plinths in more detail here kzbin.info/www/bejne/b3zYiWOPbayAndE

[@barrybrennan2135]

Very nice, I'd love an LP12 at some point.

[@ripcastercouk]

Everyone needs an LP12... You are welcome to visit us to see and hear the complete Linn LP12 range - new, ex-demo and pre-owned. ripcaster.co.uk/visit_ripcaster

[@enriquea.9061]

Great video, thanks. Would you mind sharing how do you adjust the counterweight on the tonearm. Do you have to unlock it somehow or unscrew something?

[@ripcastercouk]

Thank you for watching. The counter weight is simply rotated and this moves the weight forwards/backwards. The theaded counter weight has a friction device to ensure the weight doesn't move once in the correct position.

[@rumble602]

Great video. Hoping to upgrade my Rega P6 later this year. A P10 is the obvious choice, but I think I'd love an LP12 more. Majik spec with Lingo perhaps?

[@ripcastercouk]

Thank you for watching. The beauty of the LP12 is that you can upgrade the components to match your requirements and budget. The Lingo IV is a very good choice as it gives 33/45 rpm motor control with feedback. ripcaster.co.uk/Linn_Lingo_IV_Power_Supply_and_Speed_Control

[@larrykenner8095]

And now we also need a scissor lift?

[@jedi-mic]

Why didn't you show the torque for the main bearing? Meant to be 12Nm but that is wrong it is better 18Nm

[@ripcastercouk]

Hello Jedi-mic. The correct torque setting for the main bearing is 3.5N.m. Overtightening the bearing can damage both the bearing itself and the sub-chassis. The whole build takes significantly longer than the 30+ mins shown here - so not every detail is show.

[@user-ix2cv5bp4j]

You have to hire a whole workshop to listen to music...!!!

[@ralex3697]

Look beautiful, sound nice but continual adjustments just turn me off.

[@yambo59]

What a deal - not enough its a $$$$$ expensive table, now were expected to pay the seller a fee for assembling the dam thing.

[@ripcastercouk]

Gernerally there is no additional charge for the assembly/installation. The LP12 is assembled/calibrated/installed by the dealer to ensure optimal playback for the customer. ripcaster.co.uk/Linn_turntables

[@ralex3697]

The worst suspension design otherwise it’s a beautiful table.

[@user-ix2cv5bp4j]

You have to have a whole crew next to you to listen to music...!!! aThis is impossible..!!! Why would you give so much money...???!!!

[@josefserf1926]

There are surely far better ways to throw your money away?

[@peemsta]

Why did you even watch then?

[@garyb2507]

Perhaps, but not many are as enjoyable long term.

[@larrykenner8095]

Ya know I thought I always wanted a Linn until right about when I saw the motor speed needs to be adjusted with two screws … that’s after I already reluctantly came to terms that we need to assemble this whole thing… this man has patience enough to work on a bomb disposal squad… I’m speechless…. So it’s up to the dealers to assemble this whole thing? Really?

[@ripcastercouk]

Thank you for watching you raise an excellent point... The Majik LP12 shown is calibrated to 33rpm using two adjustment screws by us the dealer. The Selekt LP12 and Klimax LP12 use electronic speed control featuring tachometer feedback. The video shows the whole assembly process performed by us the dealer as part of the customer service to ensure you get the best from your records - this isn't something the customer does. The musical information stored on the grooves of a record is small and subtle. You need a turntable that is correctly setup to extract this information from the record. It is simply not possible to ship a delicate piece of equipment through a courier system and expect it to arrive correctly calibrated.

[@larrykenner8095]

@@ripcastercouk I live in Hawaii. There was a Linn dealer here many years ago but he moved away. I think I could probably set one up if I had the jig and associated tools but I must say it looks very methodical and mindfully slow going! I have a Sota with SME IV but haven’t used it in years. Sota has a convenient speed control knob for adjustment.