Litepro Crankset & pedals Installation on Pikes...

[@louiscastero6566]

Awesome very useful demo vd on how to DIY the replacement, i believe will help many people out there who wish to upgrade to nice Litepro Crank and BB by themselves with correct tools. Thanks for sharing, wish you best!

[@louiscastero6566]

Bro may i know where you buy the tools set from? Salamat~

[@MrKin92]

Erm... you should put the plastic bolt on left crank arm on 8:30 first to preload the crank arm to the bearing, then only tighten the pinch bolt on 8:00... Just my 2 cent...

[@finncarlbomholtsrensen1188]

At my first Free Service I had brought a new titanium crank with ceramic balls, to be changed. I do like the original folding pedal, which cant be lost! A Brompton is a horrible rolling bike on the small wheels anyway. Finn. Denmark

[@louiscastero6566]

Can we request you also do a chain tensioner installation for your Pikes? Thank you bro~

[@raylearnstofilm6668]

Bro, where to get the tools. I only have the set of allan keys

[@zagester]

Can get them online eg. Chain reaction cycle and others

[@clementihammock7572]

Nice, will follow yours upgrade onto my budget Camp Lite hazy.

[@sephil.5007]

16er folding bike? is the lenght of crank arm has enuf distance from the floor?

[@zagester]

Yup enough no problem.

[@tiongweiyeo6990]

I also upgrade my bike bb, crankset and oval 52t chainring.. is a good invest can tell the difference betwen square taper bb and hollow tect bb..

[@nocar74]

8:20 - Hi. May I know what kind of tool that you use for the preload crank? My shimano tool is too big.

[@zagester]

Thats the tool that came with the crank. Normal shimano cannot fit.

[@jackmacdonald7636]

The crankset looks nice, can you measure the chainring offset from the seat tube axis? That way, I can see if it matches close to a track crankset? And do you run the cranks with any shimano Hollowtech cups? Or did Litepro make the matching BB cups? I see there were no washers of additional hardware needed?

[@zagester]

BB came with the crankset.

[@fredrick8899]

Do I need a 20 teeth bottom bracket removal tool?

[@zagester]

Yes

[@kienwongkh9534]

Hi mind to share where you get those tools, this is indeed very helpful!

[@zagester]

I bought it a long time back frm online store, chain reaction cycles.

[@athansheena2765]

hi.. changed cranks but when i back pedal to bigger cogs the chain drops... is it due to my chain line?

[@zagester]

Could be.

[@roberts8783]

how much is the weight saving?

[@zagester]

Did not weigh them beforehand. Frm the the way the ride feels, definitely a few grams shaved off frm stock.

[@jackmacdonald7636]

For these Litepro taper cranks seen on Ebay, they only specify squARE HOLE TAPER, but what taper? JIS I hope? Do they fit well on the JIS tapered Bottom brackets? And will these cranks set up well on a track bike for s single chainring?

[@zagester]

Sorry i cant advise u on that matter as im not familiar with it.

[@buckwheat5219]

bro, could you list down the tools I need to perform this pls, TIA

[@zagester]

15mm spanner Bottom bracket tools for square tapered & hollowtech BB 8mm allen key 5mm allen key Chainring nut wrench Crankarm bolt remover Optional pipe for stubborn BB

[@buckwheat5219]

@@zagester ty! missing alot of the basic stuff, guess I need to bring mine to a local shop then, rofl

[@tociyes]

@@zagester haha.. I almost gave up on this stubborn and irritating BB to remove.. I used my spare seatpost.. And voila... Wooooh..!!!

[@rmel4930]

For BB installation, there are total of 3 Spacers, should install 2 on right and 1 left or 2 on right and 0 on left > Tks!

[@zagester]

2 right 0 left works fine for my chainline.

[@rmel4930]

@@zagester copy that ! tks!

[@rmel4930]

@@zagester Did you purchase the upgrqade as set? Appreciate the link pls.

[@zagester]

@@rmel4930 bought separately frm LAZADA.

[@rmel4930]

@@zagester 48T Narrow Wide? How was the packaging? I understand that some just wrap it in plastic and received with some scratches.

[@weykeenng7455]

Did you not have the tighten the chain?

[@zagester]

Nope, changed same chainrimg frm 48t to 48t.

[@cfengnet]

Don need to grease bottom bracket?

[@zagester]

Best to put some on the thread, but not too much.

[@mctvadventure1086]

Where you buy your tools?

[@zagester]

I bought mine at chain reaction cycles.

[@azwanAJ]

What is the spec tool for tigthen the litepro Bb? Mean size

[@zagester]

Im not really sure about the size. I used the standard hollowtech bottombracket tool.

[@jerrymiller9712]

Hi dude! What is the spindle length for the bottom bracket? 119mm for pikes?

[@zagester]

Its a 68x120mm.

[@jerrymiller9712]

@@zagester thanks for the prompt reply 🙏

[@kyawkyawtv949]

Hi! I’m just curious. Does it affect the length of the chain (stock chain)when you upgrade the chain ring into bigger size?

[@zagester]

No problem with the stock chain lenght. If u go bigger than 48t chainring than chain lenght will be affected.

[@kyawkyawtv949]

@@zagester so if you go bigger than 48t, you change also to long chain? Isn’t it?

[@zagester]

@@kyawkyawtv949 yes.

[@kyawkyawtv949]

@@zagester thanks bro! See u around!

[@zagester]

@@kyawkyawtv949 no prob, hope it helps.

[@handsonbrompton7875]

👍

[@ptx688]

What is the grease you were putting on? Is it lock tie grease?

[@zagester]

Not loctite, juz normal grease to prevent it frm getting stuck.

[@raylearnstofilm6668]

May I know how the ride feels?

[@raylearnstofilm6668]

As compared to other bikes and brompton

[@zagester]

For brompton i cant say as ive nvr ridden one. Compared to normal bikes there are some difference especially in terms of changing gears as u nd to stop pedalling to change the internal gear hub. The internal hub compare to normal hubs, the engagement feeling are different too. Those who r used to normal hubs with bigger rims n multiple gears will find tis bike a bit of a struggle due to its smaller tyre n lesser gears.

[@raylearnstofilm6668]

@@zagester thankyou

[@zagester]

@@raylearnstofilm6668 👌

[@raylearnstofilm6668]

@@zagester wow u reply so prompt! Appreciate it.

[@benedictchua8580]

Is hollowtech bb better than stock square tapered?

[@zagester]

Yup much lighter n smoother.

[@raylearnstofilm6668]

Hi sir, is upgrading the wheelset to an aero one difficult? Does it affect the rear internal gearhub

[@zagester]

Aftermarket aero wheels usually use external gears replacing the internal hub to reduce weight.

[@raylearnstofilm6668]

@@zagester thanks 😊

[@Now2Market]

Is this 48T or 54T crankset? What was the original crankset 48T?

[@zagester]

its a 48T same as stock.

[@Nicktach]

what is the weight differences? thanks

[@zagester]

Did not weigh them beforehand. Frm the the way the ride feels, definitely a few grams shaved off frm stock.

[@carljudeopolentisima27]

can litepro crankset be install in a road bike frame?

[@zagester]

Im nt sure about that.

[@FirstLast-jm4dx]

That looks just like a Shimano/SRAM GXP bottom bracket, so as long as your road bike bottom bracket takes the English bottom bracket, it should be able to use this crankset.

[@terencegoh2647]

how much weight saving??

[@zagester]

Could nt giv u the weight difference as i did nt weigh them. The weight difference can be felt though.

[@victoriogutierrez6807]

Watching here idol,angkasan tayo idol kung okay sa iyo.

[@daveadriffield7296]

Pikes?

[@zagester]

Yes

[@daveadriffield7296]

@@zagester picycle.

[@jaeatinerary1220]

What is the brand name of your tools? Where can I purchase those? Thanks more power

[@zagester]

Im using brand x tools bought years ago at online store, chain reaction cycles.

[@kakigoyang]

Salam abg Zam...grease apa yang dipakai tu…?

[@zagester]

Salam tuan wahab... Grease biasa saje😁

[@kakigoyang]

@@zagester alamak dia kenal da...kantoi... lol...nice vid bro btw...very informative...mana dpt lite pro?

[@zagester]

@@kakigoyang lazada bro.

[@uchihadenni]

Chainring 48T? It must be 56T so you can make it avg speed 30km/h

[@zagester]

Not really into speed as most of my routes involve climbs. Tried 52T but found it uncomfortable on climbs. Mayb in the future i might go for the aggressive setup.

[@uchihadenni]

@@zagester oh i see... sorry for it

[@zagester]

No prob 👌

[@aaxel3211]

Hello, i am on 48t currently. Was thinking to go 53 or 56. Will 56 be horrible when climbing ?

[@maylentan8107]

how much po ang pikes? where to buy?

[@zagester]

Got it frm carousell seller.

[@optimus880]

@@zagester Hi Sir. I just bought a pikes and am looking to upgrade to your setup. Could you please recommend me your carousell seller? I am new to foldies

[@zagester]

@@optimus880 bike frm carousell , parts i bought thru shopee.

[@optimus880]

@@zagester thank you!

[@zagester]

@@optimus880 no prob👌

[@louiscastero6566]

hi bro, if i were to change to 56T Crank set can i use back the stock chain? Thanks man!

[@zagester]

Nd to change longer chain else it will b too tight.

[@nr619]

7.55 is wrong ! put the cap first and then tighten the crank

[@zagester]

Yes i agree, an oversight on my part😁

[@kturlapati]

@@zagester you tightened the cap with a star round tool..what is that?

[@zagester]

@@kturlapati its a crank arm cap remover tool.

[@kturlapati]

@@zagester thanks..do you have any shoppee/Lazada link for this? Thanks in advance

[@zagester]

@@kturlapati sorry i cant provide any link frm either of them as i bought mine a long time ago which came in a set of bicycle tools. U may try searching for crank arm cap remover, hope tis helps.

[@daveadriffield7296]

No need to go to all the trouble of changing components; just buy a Tern bike.

[@zagester]

to each is his own.

[@dreamingguy1999]

Please stop the Music.Your Video is Usefull how-ever the Music is totally something that will cause headache--Why not a Video of Substance than focusing on the form/presentation or appearance.Your Video has lot of Substance and it is spoilt due to this Music, which is not necessary and doesn't enhance it.

[@zagester]

🤗

[@allaboutcuteness53]

This video is misinformation, you made a lot of wrong things. I think you also cross threaded your bottom bracket.

[@uthen2511]

จุดขันเกลียวแต่ละจุดไม่ได้ขันอัดแน่เลย แบบนี้ขี่ไปได้ไม่เท่าไรหลวมคลอนหมดแน่

[@zagester]

ทำงานได้ดีสำหรับฉัน ทำงานเกี่ยวกับจักรยานที่แตกต่างกันมาหลายปีไม่เคยมีปัญหาใหญ่มาก่อน แต่ขอขอบคุณมุมมองของคุณ