Litepro Easywheel Extender Installation for 3sixty, Pikes and Brompton

Рет қаралды 30,687

Күн бұрын

Пікірлер: 46

@lonestarlaurel8620 2 ай бұрын

Pretty bikes. Nice set up. Such a well done video, so very helpful. I was really stuck. Got the part, no instructions. Thank you so much! 🇨🇦 here.

@carolynchaney4709 3 жыл бұрын

Yes! Thanks for all the fine details you covered - from start to finish.

@albertmdomingo 3 жыл бұрын

I'm happy to know that this video helped you on your installation. I have a video also for maneuvering folding bike with wheel extender. You can watch it when you have time. Ride safe always! kzbin.info/www/bejne/l5W7g42CiMeEbLs

@dankelly5440 3 жыл бұрын

There's about 1mm clearance on a 2008 Brompton frame, you can just get one washer in on one side.

@idaeinjaw2139 3 жыл бұрын

thanks for the detailed instructional video!

@samwong5045 2 жыл бұрын

Thanks a lot for the great video. It help me to install the extender.

@albertmdomingo 2 жыл бұрын

You're welcome! Thanks for watching! Ride safe always!

@reggietheroman 2 жыл бұрын

Love your video! Extremely helpful!

@albertmdomingo 2 жыл бұрын

Thanks a lot! Have a good day and God bless!

@seanlee7670 9 ай бұрын

Did you have any experience the angle of the extender move even after tightening it? Especially so hitting something on uneven surface. From the design, there is no support on the angle fixed and it is only by tightening. After the angle moved, it will hit the suspension block and if the extender moved another side, the suspension block will hit the floor.

@albertmdomingo 9 ай бұрын

After a long time, it happens sometimes, so I will just tighten it more. That’s why during the installation process never forget to install the conical spring lock washer. This helps to avoid movement or limit the movement.

@portraitonetelo1897 2 жыл бұрын

Nice tutorial. I have a question though. Does the arm extend on its own when riding? Heard the Litepro extender has that problem. Can you kindly verify if you have faced similar issue while riding your bike. Tks.

@albertmdomingo 2 жыл бұрын

Thanks! I didn't experienced that, the arm extending own its own? It's already a year since I installed the extender on my orange trifold bike and I still don't have that experience. Maybe others didn't push in properly. If that thing happens after pushing it correctly, then it's faulty and needs to be replaced. So far our 2 bikes with litepro wheel extender are still ok. The Quality is good! Worth buying!

@portraitonetelo1897 2 жыл бұрын

@@albertmdomingo Thanks! 🙏

@snakeplisskenish 2 жыл бұрын

Hello. Great video. Which way round should the conical spring washer be? Thanks

@albertmdomingo 2 жыл бұрын

What brand of trifold bike do ypu have? Brompton or other brands like pikes or 3sixty? For 3sixty, let's say the left wheel. Screw, washer, extender plate, conical spring washer, then the bike mounting point.

@iftiali 2 жыл бұрын

Excellent tutorial!

@neoVIVE 3 жыл бұрын

Great video!! I just got my litepro extender and your video helped a lot (I have a 3sixty, so the washers are needed).

@Ram-69 3 жыл бұрын

Try install rollerblading wheel. More stable and smooth to push

@albertmdomingo 3 жыл бұрын

Thanks! I will try that one! 👍👍

@smallWheelsRolling 2 жыл бұрын

Rollerblade wheels are thicker than stock wheels, will it interfere with the paddling?

@albertmdomingo 2 жыл бұрын

You have a point, it will cause heel strike on the 2 wheels near the suspension block.

@lonestarlaurel8620 2 ай бұрын

These comments on the roller blade wheels have been very interesting. Thanks to all commenting here. A very special thanks to you, Albert Domingo (albertmdomingo), for sharing your expert information in this matter.

@albertmdomingo 2 ай бұрын

You’re very much welcome. I have also a video using decathlon rollerblade wheel (Oxelo). But currently, I used only two roller blade wheel because the other two near the seatpost gave me discomfort because I experienced heel strike many times.

@dreamingguy1999 Жыл бұрын

Would this be suitable for P Line Brompton. I bought one extender but this would not fit on the P Line.Please kindly let me know.

@albertmdomingo Жыл бұрын

I already installed this type on my friend's C-line Brompton and it was okay, You don't even need to put extra washer as spacers, only the conical spring lock washer which is a must. But for P-line I'm not sure. I think should be okay.