Nice work, thanks for sharing, very similar to my setup.
@darrellschannel24487 ай бұрын
What battery do you use? And will it fit in an old town 106 pdl?
@stripermanly8 ай бұрын
I have a lowrance graph on my kayak already. Question is can you use the garman strictly for live scope and not mount the normal transducer for the garman? I would just assume use my lowrance for down imaging and the garman for live scope.
@Bennett_Nall7 ай бұрын
As far as I'm aware, you don't need the garmin gt transducer to run ls.
@BamaBassCatcher99 Жыл бұрын
Where did you get the actual mount that the pole slides in? What size is it?
@Bennett_Nall Жыл бұрын
The mount that the pole slides into comes with the transducer pole. There is an option on the fishing specialties website to build a kit. Once you pull it up on their website, you can see what the options are. It should be easy to tell which ones I used.
@slampigcj3413 Жыл бұрын
And unless I’m mistaken, you’re still using your transducer on the bottom and the livescope transducer on your one screen?
@Bennett_Nall Жыл бұрын
That's correct, my GT56 transducer is mounted under the kayak and the lvs32 transducer for livescope is mounted on the pole to the side. They are both hooked up to the same unit, and I can switch between the 2 on the same unit.
@coolbreeze4u2nv8 ай бұрын
@@Bennett_NallIs it not recommended to have them both on 1 pole or will there be interference?
@Bennett_Nall8 ай бұрын
@@coolbreeze4u2nv 2 lvs32 transducers will interfere with each other, but I don't get interference from the gt56 transducer and my lvs32 livesccope transducer.
@Stacking.plates Жыл бұрын
Which yak attack fish finder mount is it? Is it the universal one? Also does your prop on your pedal drive show up on the live scope?
@Bennett_Nall Жыл бұрын
It's the yakattack fish finder mount with the locknload mounting system with hummingbird square on top. Thats what it says on Amazon. And the prop doesn't show on livescope or interfere with it.
@slampigcj3413 Жыл бұрын
Anyway you can link all the stuff you got? Really looking to do the same here this spring
@Bennett_Nall Жыл бұрын
I posted it in a comment. I probably should have left links in the description, but this is my first time doing a video like this. Still learning.
@slampigcj3413 Жыл бұрын
@@Bennett_Nall oh not a problem man I was just seeing if you still had the info cause I like the Mount set up you got. I have a sportsman 106 that I’m trying to mount my livescope to
@mattybassfishing11 ай бұрын
Where do you put the transducer pole when you trailer it?
@Bennett_Nall11 ай бұрын
I stick the back of the pole under my seat and the transducer sits next to my drive. When I put the Rachel straps on, I use the tag end to tie the transducer in place so it doesn't bounce when moving. I also recomendd getting a cover for the transducer.
@mattybassfishing11 ай бұрын
@@Bennett_Nall thanks for your help Bennett!
@MassReelFishing Жыл бұрын
Are those SLA batteries?
@Bennett_Nall Жыл бұрын
Amped Outdoors lithium batteries
@MassReelFishing Жыл бұрын
@@Bennett_Nall and you only get 6-7 hours of use? Amped website says you should be getting 20+ hours of run time. Might want to reach out to them.
@TravisDoesKayakFishing Жыл бұрын
The live scope murders the battery if its 30mh going in 7.