Full Restoration - Scrap Motorcycle to Fully Electric Future Bike

What about making an Electric Motorcycle from Restoring and modifying a Scrap one ? This Project took more than a Half year. We Restored the Motorcycle First and then, Modified it. We worked very hard in this project. The main Motive for making a Scrap Motorcycle to a Electric Bike is to go forward towards the Future. We Removed the Engine and inserted the Battery in the Fuel tank Now, We have a Lot of space in the Engine Section. Yet we didn't use the engine space but we can use this space for a trunk or we can install a secondary battery there.
The main Features of this Bike are as Follows :
o It has a Top Speed of more than 80km/h
o Time to Full Charge is around 6 hours with a domestic charger but with commercial charger, the time will reduced.
o It has a Range of 100km Distance on a single Charge (Not Tested Yet)
o It also has a Reverse System
o It has 3 Modes : Slow, Normal & Fast
o No Noise
o No pollution
o No Maintenance
Specs:
o 72V 1500 watt Hub Motor
o 72V 20A LiPo4 Lithium Ion Battery
o 72V 2A Domestic Charger
o Rear Disc Brake
o Electronic Brake
o Main Switch Breaker
Also Watch our Other Videos:
Full Restoration 60 years Old 1962 Vespa Scooter
• Full Restoration 60 ye...
Full Restoration 40 Years Old ruined Classic Motorcycle
• Full Restoration 40 Ye...
Turning a Vintage Motorcycle into an Incredible Cafe Racer | Full Restoration
• Turning a Junk Motorcy...
I did my Best in this Video. So, If U like this Video, Please Give a Thumbs Up and Give us Suggestions and FeedBacks in the Comment Box.
Do Subscribe to Encourage Us :
kzbin.info...

[@fupabox]

good work , but a few concerns . The front downtube engine mount removal is dangerous. The original engine is designed to be a load bearing part of the frame . You reinforced the upper backbone but should support the front fork tube to the frame center .

[@rickc2222]

Yes the engine is a "stressed member" i believe normal term is. This is why I chose carefully for my electric project - it has a full cradle frame with 2 downtubes which makes it easy to build a rack or shelf onto.

[@mirzabalayevk]

*Exceeded my expectations, fast,sturdy, dependable, **Latest.Bike** . Great for city commute, Bike speaks for itself!!!Adam in customer service is great.*

[@Shawn_the_Protogen]

Interesting. With all the free space where the engine used to be, you could mount a second battery pack and a storage container.

[@LiveWithCreativity]

Nice Suggestion. ❤

Yes, definitely a nice storage, like a cool bag or something. In terms of battery, 100km sounds enough for daily use.

[@JuanAlbertomaserarte]

Second battery? Second front engine?

[@user-dq4re8dv8k]

1111

[@user-dq4re8dv8k]

1

[@swecreations]

Audio quality has improved a lot! Much better than your old videos! Love it!

[@eltonalfred9776]

at the 21:03, you can see how the frame of the electric motorcycle flexes/ bends when braking. eliminating the engine support and the engine itself removed from the resistance structure the frame that made it rigid and not to bend. if you climb on it, in time it will turn into a banana... Not really safe...

[@vishnutheepb6839]

This man could even restore the titanic :)

[@jaiprakashn9686]

amazing person you are, just a super. *pro* work of towards the futuristic EV's, you have covered everything, thanks. JPN.

[@krishm2478]

That's the most structurally solid motorcycle that I've seen

[@eltonalfred9776]

🤣

[@JeanPaulLaureys]

sometimes I have reservations about such restorations

[@kevinfisher1632]

Brilliant piece of workmanship.

[@LiveWithCreativity]

Thanks a lot

[@marioavila9025]

Impresionante trabajo, felicitaciones. Saludos desde Colombia.

[@RaselPigeonLoft]

বাংলাদেশ থেকে দেখতেছি ❤️❤️🇧🇩

[@TexDeafy]

His shoe caught my eye… what the…. never seen that design before!

[@sarfarazali2229]

bike ka chasis kat dya aur oper se wazni battery b rakh di salam hy apki engineering ko

[@sharjeelahmadawan2689]

Manna pry ga kia bike bnaya hy 👌👌

[@grammybear4226]

🐼 Big Panda Bear Hugs from a 68 yr old grandma in Texas, USA 🐼 ❤ 🎀 👍 🧚‍♂ 🐈 🧚 🍀 💐 🌸

[@ganeshrvgk]

use LED lamps to save energy and plan for regenerative braking to increase the range. Rest all good, looks like you have more space beneath your legs !!!

[@byzozan]

you could make a small storage area in the engine block cavity

[@daimlerlm6381]

nice! looks like black tea bonfire

[@kermithuang2139]

😱😱😱👍👍👍🙏🙏🙏👏👏👏Praise from Taiwan.

[@SC.243k]

Fanstastic work 👏👌 thanks my friend👍👍👍

[@billyfoster3223]

Great idea! Great work! Cheers!😀⚒️🛠️👍🔥

[@RestorationVideo]

Công việc xuất sắc! Thực sự sự chăm chút cho những chi tiết nhỏ nhất là quá tuyệt vời! : D Và luôn cẩn thận né tránh những phản ánh XD

[@felixtik9151]

Bravo 👌! but it would better to chose at least 3kw hub motor because after some time your electromotor will loose power and output will drop , you will feel it specially at roads with slope . 😊

[@cannabistoo1]

見事です賞賛に値する

[@christyfur1162]

Thanks for a great video. It has given me inspiration to continue with my Honda h100 which was not half as bad as your Honda.

[@faizakaali8679]

Without an engine, 125 Looks funny. But I appreciate your step towards the future. Carry on bro..

[@lolcec81]

Комментарий в поддержку канала и ролика, а также труда мастера.

[@ashish_motoxtreme7378]

Too much of hard work and smart electric play, awesome combination ❤️👍

[@MuhammadUsman-dx1fp]

Wao good idea

[@technicalspot7921]

Great. Nowadays most of the companies use engine space for batteries and place fuel tank having no use of it. You can use more batteries in the empty space of engine. Means double batteries and double milage. If it goes with single batteries for maximum 80KM/charge than it will be more than 160KM/charge. Or we can use one battery at once and then use 2nd one as a reserve. In both cases, we have a lot of space for anything we wish to install. Great great idea❤️❤️

[@therollingwheelz]

love it!! but i prefer putting cell in the middle of body to fill the empty.....

[@alihaider4497]

Love to watch your videos ❤

[@iginstagramgamer2806]

hi hallo sir intresting video sir

[@LakshmananLM]

I wonder if there's a possibility for regenerative braking? That could extend the range a bit.

[@lindawallace6750]

Looks Beautiful !

[@stuartgoodall225]

Great job !, but loved the painted on 'rust' espec on the alloy & plastics !

[@gameex7395]

I don't think its fake. I didn't see painted rust. Can you give a timestamp. Could be a mild fake but thats unknown.

[@umerhussain8483]

This is honda CG125, pakistani's fav bike

[@omegalsite2899]

Nice work good

[@roberttindale9012]

Loved watching this! Well done. ;^)

[@mohammadtaha2545]

Great idea! Great work!

[@LouiesLog]

Love it sure the motorbike thanks you

[@lesliewatts7537]

Beautiful job.

[@avinah223]

Shoes 👟 awesome

[@noormalik9761]

excellent job done!!

[@lmangayaay]

NICE VIDEO!

[@farhankhanzada292]

Amazing bro

[@piotrju.2115]

❤❤ good job

[@adrianotolete2741]

Parabéns ficou linda

[@imtiazkhan-vj5wo]

good work

[@jariralamjad9568]

Really apreciate your work. I just wondering You can put some storage under the 'fuel tank' so it can fill the 'empty space' where the engine used to place.

[@humaylraza8199]

Cg 125 stock engine makes lovely sound♥️👌🏻

[@davidnadeau6441]

Very interesting. problem I see is visual balance is lost with out front down tube. Replace with shielded parcel shelf to carry bags or boxes. Very nice video.

[@rayyaanilone7008]

For those of you wondering, he is a Pakistani and this is a Pakistani bike. It's one of the most famous bikes in Pakistan, CG 125.

[@syedhammadulhasan5645]

Please place a second battery where engine was placed before.... Overall tremendous work😘❤️❤️❤️

[@mzmadman]

Love your channel and the restorations but you really have to stop the with brown spray on mud/rust etc. it diminishes your credibility and respect. Just show them as is the transformations are still remarkable and brilliant. You are a craftsman not a shyster.

[@shirazelahi]

Exactly my thoughts. There's scarring and pitting with rust and there's none here, just regular wear and tear.

[@LucaCapolupo]

Secondo me bisogna mettere qualche sostegno al posto del motore che aveva anche una funzione strutturale. Comunque bel lavoro

[@Skanvor]

good look good style, good like, good by the way front wheel better be black too, at the center. lets call this motorcycle werewolf)

[@MUJADDIDmedia]

Very good 👍👍👍

[@n0zferattu]

Inspiring!

[@aroundthenature8755]

Very nice

[@JK-zl7vv]

I would have extended the front engine mount tube down to the foot peg mount, then added a storrage bag in the area that the engine was, so you can put your helmet there when not in use, or put groceries in it, a chain to lock the bike up, etc. Plus, you lost frame support when you removed it, so that would have kept the frame integrity. Great build, you also may want to wait until ALL, of your modifications are completed before you paint, that way you wont have to paint certain items twice, as you did.

[@restorationofdirty]

Nice idia ❤️

[@tonysingh9173]

Naas kar deya bhai tune bike ka engine nikal kar

[@YLocker]

Epic project

[@noormalik9761]

better than a new motorcycle!!

[@peternicholsonu6090]

I used to have 1964 Honda CB 160 in PNG and my mate had SL 120. If only we had known would happen after all the years had passed.

[@VideoGameLoop]

Keep up the Good work Jib***n

[@kmuralikrishna1582]

Really appreciate.. Seems like it's scooter hub as it is 12" hub. Did you added holes for spokes ? If yes any changes please

[@progaragechinskiemotorki]

dobra przeróbka hehe :D

[@jurekkowalski2285]

Respect for hard work and innovation but gasoline engine , sound and power is all what I love :)

[@motivatedmomin]

Better than honda engineer

[@djparn007]

Love it!

[@paulfellows2094]

love it nice job well done

[@ngakakocak62]

Wow amazing

[@npfrestoration]

Everything is just great

[@munamk4786]

A second battery at the engine bay would definetly help bring down the weight and center of gravity.

[@najamgilani8485]

Super super job brother 👍

[@Artist_nabiha]

Well done... professional approach...but I think 1500 watt motor is under power. Isn't...

[@carrestore]

Great job

[@TheOtaku031284]

I want something like this, classic Honda meets modrn e-bike. I would preferaby go with a mid-drive motor to fill up that empty space as well as also allow for pedaling.

[@roshanghoslya7802]

good wark

[@learnwithuzair4286]

Ammazing

[@MrClaudio1951]

A GENIUS

[@zulfiqaraslam4970]

Nice

[@landrelarose745]

As you're able to see, there's a large area where the engine was located. You cut off the down tube. Do you know what that means? The headset isn't supported, which additionally means that it's not as strong as it was when the tube was there. There should be one there, to differ that headset tube.

[@JoeRocket-sf6qs]

God seeing that tank cut to accommodate the battery just killed me to death,good job but hard to watch the original bike get murdered for electric power,the future for my lunch is shit,does that make it good??

[@MuhammadUsman-dx1fp]

Can you upload complete guide about electric bike parts where we purchase that

[@CrapKerouac]

3D print a stylish case below the tank, where the engine once was, and fill it with batteries, extending the range.

[@peterneo4632]

well done exports to others country.

[@kashmirvlogs8139]

MashaAllah

[@9019]

love the work, but you made too many cuts in the frame do you think it will hold up?

[@sbg444]

Aap ko mila hai 10 me 9number

[@samijee2602]

vip work man....

[@scoubidou4045]

superbe...

[@technicalpawan5203]

👍👍👍👍👍

[@hassanamankhan33]

awesome

[@fighter3120]

Круто

[@jeremysanna]

My Friend, what a great Job, I need to learn how to make this conversion for my motorcycle as well, can we please get in contact ? Thank you very much

[@mehndimj]

Interesting