Living Room Home Theater Tour (All Speakers and Equipment)

[@aaronsceilingfansspeakersa3057]

2:47 aye I have that speaker too

[@CGsSpeakerVerse-mi6ll]

It's a decent speaker, but I may eventually swap it out with a Lowell because I need more bass.

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll oh ok

[@aaronsceilingfansspeakersa3057]

Nice you got a p900

[@CGsSpeakerVerse-mi6ll]

Those are actually Quam BR8WP but I do have a P900 on the system in my room (video of that coming soon)

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll doesn’t it have a c803 driver

[@CGsSpeakerVerse-mi6ll]

@@aaronsceilingfansspeakersa3057the one in my room does, yes. The ones in the living room are using Quam drivers.

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll Oh ok. Are they the c8m10 drivers.

[@CGsSpeakerVerse-mi6ll]

@@aaronsceilingfansspeakersa3057I believe so, something along those lines. In the description, I put 8C10 but I couldn't remember the exact model. I installed this system back in 2019.

[@ElCalamardo69]

Love this setup!

[@CGsSpeakerVerse-mi6ll]

Thanks! This is the same video I sent you a while back. Once I get the system in my room settled with a few more speakers, a video is going up of that one as well.

[@aaronsceilingfansspeakersa3057]

My Atlas SD72W speaker may not have much bass, but it gets RIDICULOUSLY LOUD!

[@CGsSpeakerVerse-mi6ll]

Atlas speakers are awesome when it comes to being loud.

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll yes exactly

[@FESPerson2974]

Nice I love seeing this I never knew you had a JW Davis Speaker I have one of those I do have a Quam Br8WP Baffle And 8x Atlas P900s Actually the Quams Br8wp in buildings are rare if they use Quam drivers they will be use atlas Soundoiler drivers I do love the fourjay SDT4 EP8 Speaker

[@CGsSpeakerVerse-mi6ll]

Glad you enjoyed! A tour of the system in my room will be coming soon. The Quam BR8WPs that I have use the 8c10 drivers, I believe. I can't remember because I installed this 4 years ago.

[@FESPerson2974]

@@CGsSpeakerVerse-mi6ll 👏👏👏

[@aaronsceilingfansspeakersa3057]

0:47 is that a p900 or a Quam

[@CGsSpeakerVerse-mi6ll]

That is a Quam with a C5 or C10 driver. I can't remember as I installed them back in 2019.

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll Oh ok. Btw I’m getting a Speco speaker, a Lowell speaker for Christmas along with a Bogen SPT5A horn.

[@CGsSpeakerVerse-mi6ll]

@@aaronsceilingfansspeakersa3057Yes, I saw your video. Glad you got some great speakers for Christmas!

[@aaronsceilingfansspeakersa3057]

@@CGsSpeakerVerse-mi6ll thanks

[@IntercomEnthusiasts51]

Wow This Sounds Amazing, Is This System Only Being Used For Video Sound Or Intercom/Paging?

[@CGsSpeakerVerse-mi6ll]

It is only being used for the TV sound at the moment, but being that it is 70v system I could install a paging adapter on it if I wanted to. I currently do not have one at the moment.

[@lilshag347productionsii6]

nice setup. is it possible to connect a 70 volt amp to a kenwood home theater receiver? how do i do it?

[@CGsSpeakerVerse-mi6ll]

Yes it is very easy to do actually. On the back of the receiver, where the RCA inputs are you will need to look for one labeled either "audio out" or "line out". You would connect an RCA cable from this jack to the Aux jack on the back of the 70v amp. You can connect multiple audio source devices to the Kenwood receiver using the inputs like a TV, computer, radio, phone, etc. to the CD, Aux, TV or similar jacks to feed the audio to the receiver first. Then when you connect the cable to the Audio Out jack to the back of the amp, the receiver will then feed the audio from the source device over to the 70v amp as well (in addition to any speakers you have connected to the receiver). In my next video, I will be showing the system in my room which is powered by 2 receivers and 2 TOA amps.

[@lilshag347productionsii6]

@@CGsSpeakerVerse-mi6ll i actually have some rca cables and also one with one end rca and the other end a headphone jack that i use for plugging up my phone to play music through. mine says tape in/tape out and also video 1 and video 2. i currently have a vintage technics graphic equalizer hooked up to it.

[@CGsSpeakerVerse-mi6ll]

@@lilshag347productionsii6I'm not too familiar over how to use equalizers but I believe you can use the tape out jack to use as an audio out jack to send audio to a 70v amplifier. However I could be wrong about that, based on some reading I have done. Connecting the wrong thing to the tape out jack can blow out your speakers.

[@lilshag347productionsii6]

@@CGsSpeakerVerse-mi6ll my receiver has video 2 play in, video 1 play in/rec out, tape 1 rec/play, and tape 2 rec/play along with a cd and phono input. i have another kenwood receiver which is similar to the one im using.

[@CGsSpeakerVerse-mi6ll]

@@lilshag347productionsii6 what RCA inputs and outputs does the kenwood receiver have?