LK flexible film Screen Protector installation video for Note 10 / Note 10 Plus

[@seemack]

Longest process I've ever had for a screen protector, but I must say this is the best installation I've had, especially because I got it on the 1st try. No bubbles! I can see the line around the edges of the phone, but I'm good with that. Hopefully it protects well.

[@excruciate4083]

And does it protect well?

[@seemack]

@@excruciate4083 yeah, no problems, just don't care for the texture. But that's how all protectors are because of the fingerprint ID

[@rr-ph3kx]

The best help is to look for a video with your exact phone model as some of the tabs differ per device...first time worked flawless after watching a few times....will be buying these for future devices

[@gordzaretzki3300]

However, that is what I clicked on - supposedly for my phone. However, it shows a different one.

[@makmelaf]

Just bought a new Samsung S10+ and read that this protector was recommended due to the fingerprint sensor on the front of the screen. Ordered it and it came today. After reading some of these comments I was sure I was going to have problems putting it on. I watched the video a couple of times then played it step by step while I was installing it. Everything came off without a hitch and it looks good. I don't see any line on the screen and there are no bubbles. Thirteen steps is a little intimidating for putting on a protector but it worked out fine for me.

[@elizabethmontalvo4576]

xj

[@agarite3990]

I just gave this a go on my s10+. It was a seamless process. It's very straightforward and as long as you follow directions it'll come on nice. the real test is to see how long it will take for me to run through all 3 of these! This is a steal since it's a pack of 3 with warranty.

[@susanhogg5601]

Except it took me 2 of them ruined because it was NOT straightforward at all. I followed every instruction - it was awful.

[@ArakkAttack]

@@susanhogg5601 Easy for me. What went wrong for you?

[@TheReal704Champ]

The "Tab 2" step isn't explained clearly. When you peel back Tab 2, you only need to peel it back to the middle of the phone, then you'll squeegee from the dotted line which will allow the 'Anti-layer' to get removed. With Tab 3 you will also only peel it back to the mid-point of the phone. I screwed up the first 2 screen protectors by not understanding this step so I'm glad this came in a pack of 3. Also, there is a noticeable horizontal line across the middle of the screen when the display is off, I guess a seam of the protector. It's not THAT visible when the display is on but I guess that's the tradeoff of a multiple-step application. At least there aren't any air bubbles.

[@pondhall]

had a similar sort of problem, for the huwai pro 30 - tab 2 & tab 3 has a green dotted stripe along one edge, first one ended up in the bucket, the 2nd one we ended up peeling off all the bits and just sticking the film down, leaving some bubbles.......

[@neilwhitmore]

doesnt work for me at all

[@vivaldi_is_dreaming]

Used this guide for a OnePlus 7 Pro, worked flawlessly. Just watched the vid once, then restarted it and followed step by step. No problems at all! Works really well with my Spigen case, also.

[@gordzaretzki3300]

There is no proper video for S21 though

[@mschuexlittlechuex3581]

What if the screen protector u orders doesn't come w all that 🤔

[@coppergearheart4125]

Using the squeegee to push out the plastic tabs 2 and 3 didn't work out for me. I just manually peeled the unnecessary plastic off after pulling it up half way, and then set it and removed the bubbles afterward.

[@michaelstein3137]

Fantastic product!!

[@benjaminli188]

This comments section is divided into two sections - the people who just can't seem to figure it out and call the product useless because of their own failures, and the people who have figured it out and are relatively happy with the product. I just put the screen protector on successfully on the first try, and I think it's pretty great. The only problems I have with it are that it feels a bit rubbery instead of plastic-y, which I don't like. Also, the screen protector doesn't clean like a normal screen. If the screen protector gets dirty and I try to wipe it, the dirt smears instead of coming off. Installation steps for the inept: When peeling off layers 2 and 3, only peel halfway, then invert (you should see a green pattern where you begin the invert) the plastic screen and use the "squeegee" to work backwards towards the edge of the phone, removing the layer with the green. It might sound weird, but it'll make sense when you try it.

[@RpTheHotrod]

Worked like a charm. This also works perfectly with the SUPCASE Unicorn Beetle Pro Series (S10 Case 2019) phone protector (like an Otterbox), as it has a small front covering that goes OVER the protective film and helps keep it down. I will note that the instructions where you first fit the layers on top of the phone did NOT flatten on my phone, even when pushing down on the white paper, as the entire thing sort of had a curve pulling away from the phone. Instead of a mostly "black" effect, it was all white (not touching the phone screen) narrow strip up and down the middle of the phone. However, upon continuing with the instructions, the end results ended up forming perfectly to the phone.

[@thoughtguardian]

Sometimes I come back to this video just to listen to that sweet background music and reminisce about how satisfying slapping this screen protector on my phone was. Great product, would buy again.

[@DreamBoyDead]

I had a really hard time with tabs 2 and 3! Ridiculously hard time I messed up first 2 tries and then my 3rd attempt I nailed it, it's tricky to pull the tabs 2 and 3 I was confused on how to do it, I will be contacting support to get another replacement since I wasted 2 screens already

[@zenmototv]

This is by far the most complicated screen protector installation that i ever did. I thought it was tampered glass like my switch or gopro but its different. Anyway the result is still amazing in the end. I got 1 tiny dust in the far right edge literally at the veeeery edge and I am really bothered by it since I like it to be perfect, I tried to remove it but it became worse so I redid it, on the 2nd time I was faster but still a single dust came on the very edge in the upper part, but this time it didnt make a bubble so I can live with it for now. Got it installed on my Mi Note 10 Lite

[@hamburgerfalke5922]

use the dust protector befor instal the screen protector. :-) I got it by the first try without any dust.

[@sarah258595]

i did it and it all went fine, but wtf are the Guide Sticker LK stickers for? on the same sticker sheet as the dust-absorber LK stickers

[@sarahfreytag2013]

Worked (step 4 wasn't easy) but it has an unsightly line down the middle of the screen.

[@JustChillingNahhhhMean]

Nice... had it on the first try and result (not a pro) is awesome. Thanks

[@jamesweddle184]

Kinda loving that background music....

[@elizabethpanagoulias7095]

good video, seemed to work fine as instructed....great video

[@kellirichins1548]

Followed the video step-by-step and would ya look at that...even with my crap shakey hands, I didn't screw up! Nice. :)

[@YouAreBreathing]

I made the stupid mistake of just reading the included instruction paper that came with this screen protector. After learning by doing I successfully installed it (the most difficult part was aligning the screen protector with my phone's camera cutout). I somehow got dust under the screen protector, but luckily it came in a three-pack, so I get two more chances. It works so far, so if I manage to scratch this screen protector, I'll just install the other one.

[@triton4541]

Bonjour, J'ai vu vos produits de protection sur Amazon. C'es pour protéger un Xiaomi Redmi Note 10. Je mets un pouce levé pour faire connaitre vos tutos. J'habite en France. Cordialement.

[@differentbutsimilar7893]

I tried going rogue with just the printed directions the first time and realized "Yeeaaaahhh... I have zero chance of doing this and maybe this was a mistake." It just went so wrong haha. But it was easy with the video. It was a little tedious, but the process itself was pretty painless and I got it on perfect the first time. Really the only part you can screw-up is misaligning in the beginning, which is hard to screw-up, as that's a very forgiving step that gives you a lot of tries. The rest is kind of surprisingly simple. Almost automatic. It's like putting on a band-aid, only more sophisticated, yet easier. I feel like the next time I do this it should be pretty quick and easy. I love how it forms perfectly to the phone. Worth the very slight learning curve. I don't know what happened with the people who had a bad time, because none of them were specific. But if you take your time you can definitely get it right the first time. The way the process works, you can take your time on each step, with the ability to pause indefinitely between each major step and not screw anything up. Squeegee works perfect with slow, steady, constant motions. Doesn't catch dust, very few chances to ever even expose the adhesive side to any dust. It wasn't bad at all on my LG G8.

[@megablue8]

Just got this for my s10+. video is fine had no issues installing.

[@JICCC]

Hi, does it protect against drops or only scratches?

[@megablue8]

@@JICCC i still buy a case. I've dropped it a few times but I don't recall dropping screen face down so can't say. Definitely protect scratches.

[@UniTea__]

Successful installation. Colour me surprised.

[@alex_455]

I have did perfect one time. Good instruction!

[@Miodrag0204]

Great experience!

[@kingoftf]

Tried it with first Protector with this tutorial = perfect fit. Hassle free , no bubbles. Thinḱ by far the best in the moment because of the round edges there is no real glass protector which comes close. The typical Glass Protectors for rounded edges, "3D" labeled, only have glue over the edges, totally ugly as result.

[@geoffreyalleaume4379]

Perfect install if you follow the video !!! Thx a lot

[@parkercavinder44]

I got this for s10 and good lord is it a horribe product. The tabs were fused to the protector so they couldn't be removed. Followed all the steps and none of them worked.

[@age_of_reason]

This screen protector is good for protecting against scratches but useless if you drop your phone onto the glass front for LG G8. For some reason I was unable to find a good glass screen protector for this phone. It's just one of those phones that screen protector manufacturers either forgot about or just weren't able to make a good glass protector. I'm not buying a new phone as this protector did nothing to prevent glass breaking during when the phone hit the pavement.

[@sfbuck415]

why can't I buy a smartphone with one of these already installed?

[@coolboy56065]

This is garbage. Tab 2 would not work for me but I followed the steps before tab 2 perfectly. Had to use all 3 screen protectors and failed all 3 of them

[@jacksnyder9890]

Amen. Load of crap.

[@eziej2215]

I finally figured it out the second time around after much frustration. Definitely needs better tabs and clearer instructions

[@miguelmaia8149]

Exactly what happened to me! 3/3 failures due to product malfunction!! Waste of time and money

[@schtuff.8207]

Some of these are so thin I didn't catch them right. I messed up all three times. Was fun trying to install though, also all the other junk it provides for the installation are common around houses and shouldn't be included. What a waste of materials.

[@Empress_Shaw87]

To many steps and the I still couldn't get in on my phone.

[@Ryuk84]

horrible... completely not clear

[@veenaveto]

Well got it on, what about the edge it wont stick on.. bunch of trash here

[@note2irfan]

Hi do you have a company contact email

[@darthraider450]

Does not work on curved screens.

[@Smichelle97]

Darth Raider yes, it works. I installed it on my note 10 +

[@amyem8231]

Worked great on my curved screen (S10).

[@jorgevillagran8586]

No way

[@ialbk4462]

these instructions are ridiculous and the screen protector is of poor quality

[@ailinaldava6197]

IT DONT WORK BRO YALL ARE FAKE COMMENTING THAT IT WORKS

[@susanhogg5601]

THIS IS HORRIBLE!! I've had screen protectors for about 15 years and never had so many problems. the "tabs" snapped off.. it's not clear what is left behind. I did everything as I went. I watched the video 2 times before starting. I was patient and did what I was supposed to but there is NOTHING ON MY PHONE.. The protector is stuck on something else. I should have listened to the Amazon reviews about this being a horrible process. I never write/respond to reviews - but this is ABSOLUTELY AWFUL.

[@MrCarlosms30]

Yes I did it just follow the installation

[@gordzaretzki3300]

Stupidly designed as each package is set up entirely different!!! 😢

[@konradamunra7592]

What kinda nonsense is this? How has time to pull tabs all day ?

[@silvangelillo8388]

I would love to see Gordon Ramsay applying this crap. That's some real garbage right here.

[@joshknox2656]

Literal Trash. The screen protector won't adhere to the edges of the phone and just pulls up constantly. Tabs 2 and 3 have no easy removal either so you have to cut those off prior to putting it on, as well as it having a horrible line right down the middle (horizontal) of the screen protector. I used all 3 of this product in the pack and they all had the exact same issues, and that horrible line in the middle of the screen.

[@TheTubeMeister]

Done my ass. That's not how mine looks.

[@davidbeggs2428]

Some of the most incomplete, incompetent, flawed instructions EVER! Good thing they give a couple protectors. You will need them to get 1 done properly. Extremely frustrating.

[@hans3331000]

Why does this stupid company have so many screenprotector variations that dont even f*cking match the phone. This was sucha waste of money and complicated.

[@charleschant9537]

Worst screen protector I ever bought

[@amaybhumak]

tab 2 step does not work. waste of money

[@ank__8421]

not a great screen protector. easy to get it wrong even when being very careful. will definitely not buy again lol

[@neilwhitmore]

worthless. a screen protector shouldnt be 57 steps to install

[@benjaminli188]

I don't know why you're relating a product's value to the amount of steps it takes to install. It makes no sense. Just because a screen protector takes 13 steps to install doesn't mean it's a bad screen protector.

[@roboticseabass]

awful.