lo-fi sampler / ISD1820

fun and easy build for loads of fun

[@Bruceanddenise]

Good stuff!

[@FPVHans]

Great job! Just ordered some of those chips :)

[@sarahcobetto5613]

This technolgy has a practical application for learning musical phrases. There are programs for this if you have the music on a computer,but if you are trying to learn something from an internet site you better have a pretty good ear or a lot of patience. There was a device made for this but it is out of production now i believe. I would like to get that chip and convert mic and speaker out to 1/8" jack and see how it would work.

[@the2d]

I made just this as a diy eurorack module =)

[@the2d]

I made a eurorack format with this chip, it's really fun to play with. There is a playlist on my page if you're interested.

[@cacharro7172]

Nice video! Its possible conect two outputs to the module? 1for speaker 1 for jack?

[@maikmario71]

Hello, I also have this sampler, unfortunately at the beginning of each recording there is always a “crackling/clicking” I didn't hear that in your recordings. Did you consciously do something against the cracking? Is your module connected to battery or power supply? Thanks in advance Regards

[@chadkhudles852]

Hey bro i am new at sampling but my keyboard broke its a yamaha prs series 510 so do you have any idea on how i could use parts of it to make a new sampler out of it

[@MrBfurse]

where in the circuit have you placed the resistor for the pitch manipulation? Is it from the play.e pin? Thanks!

[@glnnk_art]

Sam Furse It’s the R4 SMD Resistor on the board. Just bridge that with a Potentiometer

[@Naked4FunTV]

great project bro, I have a question, sorry I'm beginner, can you activate the play button with a cv trigger? example connect it with this device build from this guy? kzbin.info/www/bejne/bHLVdXqZitacja8 the idea is to have it like kind of module, and trig from one of the 6 voices of the drum sequencer, I'm wondering how

[@dirkk82]

I believe so, theres a large project of this on the web, if you type in the chip name, it should come up or even on here, i think it's by casper electronics

[@Naked4FunTV]

@@dirkk82Hey thanks for quick answer, thing is casper bore me a little I don't find easy to understand a little confusing for me, I watched it 10 times lol, I think there should be a easy way to trigger it via cv :) I know you know the answer :P

[@Naked4FunTV]

@@dirkk82 i reveal you my diabolic idea: is to build a sequencer and put 8 of this babies in a box and sequence it with a drum sequencer :P I know how to do everything, single microphone audio ins and out, I miss only the trigger part :P

[@dirkk82]

@@Naked4FunTV a diode and 10k resistor in series going to the play pin of the IC is all that is needed, CV voltage is max 5v

[@Naked4FunTV]

@@dirkk82 thanks a lot, I had kind of this idea, but yeah my knowledge are very basic, so I wasn't sure of it at all and you look advanced from your video :) thanks again good luck with your projects and your youtube channel :)

[@edwardfletcher7790]

Please, please don't hand hold/chest mount your camera, it's pure vomit vision. ...