Dear All, Kindly check out the below link for Structural Analysis and Design of RCC building using Staad.Pro software. In this course, all the basic concepts, and Lateral load Analysis(Response spectrum and wind load analysis) of a building as per IS-456, IS-875, IS-1893-2016, and detailing as per IS-13920 have been explained. www.udemy.com/course/staadpro-v8i-structural-analysis-design-of-a-rcc-building/?referralCode=C1CBC2B104EF72579338
@helenatijing87983 жыл бұрын
We are using this method in my past jobs,this is fast and effective.Nowadays many softwares are born but yet,we are doubting the results beacause of unseen errors in analsyis,by doing this you can check your design and analysis and sleep well.😂😂😂
@zarghamhaider7353 жыл бұрын
Error error in video
@designsource44814 жыл бұрын
This is the best tutorial in my life.Very clear concept method.Thanks for make this kind of tutorial.
@CivilEngineeringMastery4 жыл бұрын
Glad it was helpful!
@sayandas89144 жыл бұрын
Mam your tutorials are too good💚💛mam i have one request to you can you please give us a tutorial about how to design a building manually by comparing the same model with staad pro.please mam.It will be very much useful for students and working professionals both🙏🙏
@kamalahamed85865 ай бұрын
super
@civilengineeringknowledge72504 жыл бұрын
Very helpful for me
@saisekhar54544 жыл бұрын
Very helpful 👍 video
@عبدالكريمحسنبحر4 жыл бұрын
Thank you mom you are the best
@ershashankkumar39914 жыл бұрын
Very helpful all vedios. Please provide more videos on manual practice with staad design. Thank you
@CivilEngineeringMastery4 жыл бұрын
Sure I will
@abhisheksen3254 жыл бұрын
Please share the load calculation of an elevator and also share the load calculation of steel building
@rahmanrahmani28964 жыл бұрын
Could you please explain how you have decided the contributory area to each column in your AutoCAD drawing. The load calculation is straight forward (load from slab & wall to beam to column then foundation). Thank you!
@CivilEngineeringMastery4 жыл бұрын
Yes correct,but this is influence area method in which the slab load can be transferred to column by using the tributory area. Contributory area for each column can be decided by using center line of the columns.
@narendrarbhagyaa10124 жыл бұрын
Thank you madam this was very helpful to me
@CivilEngineeringMastery4 жыл бұрын
Glad it was helpful!
@rahulsanapally8 ай бұрын
AWESOME MAM U R SIMPLY AMAZING U GOT GREAT KNOWLEDGE IN CIVIL ENGINEERING MAM HOW CAN I GET THOSE AUTOCAD DRAWINGS TO PRACTISE🙏🙏🙏
@CivilEngineeringMastery8 ай бұрын
Please join the channel membership to get the drawings.
@syed7451_civil3 жыл бұрын
G+2 residential building ke Liye ground floor beam ke liye kitna mm ka rod use kare. Beam size 250× 400 mm For idea please reply
@ersedhuramprasanth71614 жыл бұрын
How you calculated influence area for particular columns as you mentioned in plan?.plz make video of ,how to assign size of footing, column,beam and distance between column.
@CivilEngineeringMastery4 жыл бұрын
Influence area is calculated by using the center lines(area around the column) between columns.
@ersedhuramprasanth71614 жыл бұрын
@@CivilEngineeringMastery if you Already uploaded video plz mention below
@CivilEngineeringMastery4 жыл бұрын
will upload one video.thanks.
@CivilEngineeringMastery4 жыл бұрын
Refer the below link for influence area calculation kzbin.info/www/bejne/pqXEdGWemcloj7s
@civilengineeringknowledge72504 жыл бұрын
Please give a video on all about design of a two story building step by step i.e. 1st floor design and ground floor design, slab design, beam design, column and footing , and all loads calculation that load comes on that section.
@CivilEngineeringMastery4 жыл бұрын
ok.
@عبدالكريمحسنبحر4 жыл бұрын
Waiting that mom thank you very much
@masterbitter76884 жыл бұрын
@@CivilEngineeringMastery please
@greenenvironment70984 жыл бұрын
Nice one..
@mayappamechhennavar64183 жыл бұрын
Mam How To Calculate the ultimate XI load of the building to calculate the size of the column?
@nageshwaraonandigama61944 жыл бұрын
Super madam
@Salman156914 жыл бұрын
Best Video. Ma'am I've one question that why are you not factored load in calculation..
@CivilEngineeringMastery4 жыл бұрын
I have factored at the last please watch all parts of this video series. kzbin.info/www/bejne/joTTpaCZZthketE kzbin.info/www/bejne/bZTTqo1uiJtpbKc kzbin.info/www/bejne/ZoO7dpararqFj9E kzbin.info/www/bejne/rJu2dmSNaNmarKc
@jaydeepganguly6144 Жыл бұрын
Please make video on manual calculation of Mux and Muy for g+2 building frame
@zarghamhaider7353 жыл бұрын
Please ans 25kn/m3 or 25kn/m2 which one is correct???
@mageshkumart436229 күн бұрын
🎉
@naveenkumarmakamala10594 жыл бұрын
Please upload the autocad design also
@asifkhatri37693 жыл бұрын
How to check upper storey column load in staad pro???
@faizanshaikh60362 жыл бұрын
Definitely these all tutorials are very helpful for students.keep it up mam👍👍.and make a more video on whole design of building from start to end with different geometry.Thank u
@CivilEngineeringMastery2 жыл бұрын
Sure 😊
@CivilEngineeringMastery2 жыл бұрын
I have created a course, structural design of buildings using Etabs software which includes structural analysis and design of a five-sorey RCC building(Real project) and is now available on udemy. Kindly use the below link to avail the full course. www.udemy.com/course/structural-design-of-buildings-using-etabs-software/?referralCode=14883FDBBD95A1ADAC02
@MohammedImran-wz4kv4 жыл бұрын
good explanation tq.
@MohammedImran-wz4kv4 жыл бұрын
very helpful for me.
@mdriajulislam88284 жыл бұрын
maam im in a big problem my load came 93000 kg in 12 m2 now i cannot convert them in cm how much would be for my column concrete load in per cm2????
@malinisankar24003 жыл бұрын
Hai mam. Thank you so much for your videos. It s explained very detailed. One kind request can u provide autocad file so tat i can practise better.. pls. I have seen few other people also requested the same. Pls do this favor mam
@mayurchoudhari65783 жыл бұрын
How to calculate the thickness of slab
@lokeshacharyab.g8006 Жыл бұрын
Madam how to design single column using load and moments in staadpro software? Which are the two moments tob considerede to mmoments or bottom moments
@mdsarfarazali41514 жыл бұрын
Please send full details manual designing
@AAAFriends4 жыл бұрын
Please upload videos architecture plan same as structure plan with structure analysis in staad pro.
@CivilEngineeringMastery4 жыл бұрын
Please refer the below links for staad.pro analysis 1.Modelling in Staad.pro with plate elements kzbin.info/www/bejne/kIeynHqohtidfs0 2.Assigning loads in Staad.pro kzbin.info/www/bejne/rqa4n2dsodyWq6M 3.Results from staad.pro analysis kzbin.info/www/bejne/pWfLcmabjZ5gp7c
@zarghamhaider7353 жыл бұрын
Beam Lxbxd =.230x.375x25=Xkn/ans in meters . What is beam length
@CivilEngineeringMastery3 жыл бұрын
self weight of beam calculated as uniformly distributed load in kN/m. 0.23 x 0.375 x 25 = 2.156 kN/m.
@deepbhavsar52314 жыл бұрын
*For Column Selfweight is in KN* and for wall & slab it is in KN/m?? Why??
@CivilEngineeringMastery4 жыл бұрын
Load transfer mechanism is slab to beam,beam to column and column to foundation. Slab loads are area loads, we calculate per m^2. Wall and beam loads are uniformly distributed loads which is kN/m. Column loads are axial loads which is kN. Please refer the below link for more details. kzbin.info/www/bejne/d3uqYn2frZ2Bes0
@nageshwaraonandigama61944 жыл бұрын
We expected more valuable vedios from you
@zarghamhaider7353 жыл бұрын
Mam. 125x25 (unit weight of rcc is 2500 but not in m2
@CivilEngineeringMastery3 жыл бұрын
Unit weight of RCC is 25 kN/m3.
@gowthamiv48414 жыл бұрын
Here you have calculated one column load but simply multiplied.. Actually number of columns per and floor and number of stories then total load arrive..
@CivilEngineeringMastery4 жыл бұрын
Here we are calculating loads on individual column and some times loads coming on each floor may differ. So we have to calculate loads coming on each column and each floor. In this calculation we have calculated loads coming on each floor for individual column. only the self weight is multiplied by number of floors.
@elliotfamutimi97762 жыл бұрын
Why is wall load not included for beam load calculation
@CivilEngineeringMastery2 жыл бұрын
Wall is load calculated separately and added with the total load. Please watch the complete series (part 1 to part 5) for a better understanding. Part-1 www.youtube.com/watch?v=q8-pu... Part - 2 www.youtube.com/watch?v=XSptm... Part - 3 www.youtube.com/watch?v=7cpyZ... Part - 4 www.youtube.com/watch?v=0RXEc... Part-5 www.youtube.com/watch?v=vjSE1...
@vishalsharma2290 Жыл бұрын
How to extend my Ground floor column... For first floor.... Ground is old construction now I want to construct a first floor
@CivilEngineeringMastery Жыл бұрын
Kindly contact the engineer who is available at your location. Without a proper analysis of the existing site condition, we cannot guide you.
@vishalsharma2290 Жыл бұрын
@@CivilEngineeringMastery local engineer ask about rebaring ... But I m not rebaring nis safe for column member....
@darwinvillamor9373 жыл бұрын
no load for roof??
@mohankumars98774 жыл бұрын
How do we get that influence line diagram
@CivilEngineeringMastery4 жыл бұрын
Influence area is calculated based on center to center between column. Please refer the below link for more details about influence area kzbin.info/www/bejne/pqXEdGWemcloj7s
@mohankumars98774 жыл бұрын
@@CivilEngineeringMastery okk mam
@sumankumarparida86104 жыл бұрын
Can i get the the autocad file for better learning..
@shamsheralirana31274 жыл бұрын
Madam size of Column kese mila? Kyunki size of Column find out karne ke liye humare paas Load hona zaruri he.
@HammadBashir8093 жыл бұрын
by trial you can do. with experience
@shamsheralirana31273 жыл бұрын
@@HammadBashir809 Assalamu alaikum sir, Sir matlab ki pehle hume assume karna padta he Column ki size jese 9'×18 , 12×18 etc Right?
@HammadBashir8093 жыл бұрын
For larger span, load will more Column size will large. For smaller span it may be small.
@ultimatewarrior38292 жыл бұрын
Mam i have work for you like design calculation estimation etc we have small consultancy. I will pay
@CivilEngineeringMastery2 жыл бұрын
Kindly send your detailed requirements to civilengineeringmastery@gmail.com.
@yirrroy22tyrri823 жыл бұрын
I cannot understand how we calculate wall load in per unit squ.area???! Why not per unit length kn/m???! If the slab to be designed is flat slab then ok its logical to take partition per unit area.
@CivilEngineeringMastery3 жыл бұрын
Wall load is calculated for kN/m only.
@yirrroy22tyrri823 жыл бұрын
@@CivilEngineeringMastery ok thanks but you still wrote down in kn/m. sq
@CivilEngineeringMastery3 жыл бұрын
That is partition load(kN/m^2). Please refer IS-875
@ezhilarasan37764 жыл бұрын
This method only used for g+2 building?
@CivilEngineeringMastery4 жыл бұрын
No.Influence area concept is same for all the buildings.Only loading we need to consider according to the type of the building.
@ezhilarasan37764 жыл бұрын
@@CivilEngineeringMastery thanks for the rply
@rajalakshmirajendran72593 жыл бұрын
How to draw the influence area drawing mam...
@CivilEngineeringMastery3 жыл бұрын
Please refer the below link kzbin.info/www/bejne/pqXEdGWemcloj7s
@alexmungoma50302 жыл бұрын
i dont have a credit card how do i get one
@CivilEngineeringMastery2 жыл бұрын
Do you want to join the channel membership?
@alexmungoma50302 жыл бұрын
@@CivilEngineeringMastery yes please because am also an engineer
@CivilEngineeringMastery2 жыл бұрын
You can use debit card as well.
@vishnusan32494 жыл бұрын
Tamil ilaya madam
@RutuPatel19994 жыл бұрын
Can you send me staad pro crack software link & working software..... ?