Loading Up Our First Load On Karl's 71 GMC Ramp Truck Now That The Deck Is Finished!

[@Dagrond]

Drawing a crowd when you stop for fuel is always a sign of success. Congrats gentlemen.

[@rudder1174]

Brent and Karl. The dream team, the dynamic duo, the ehhh you get the point. My favorite cartube crossover team.

[@chrisskeers1983]

It’s so cool when you have that friend who can anticipate the next step, knows what you are thinking. Even the problems become fun. Family isn’t always blood!

[@mikescudder4621]

Friends are the family you choose ;-)

[@oh8wingman]

I used to build truck bodies for a living and there are two things about those front compartment doors that gives me pause for thought. First, if you are on the side of the road and you have to open the them up they are going to project fairly far out from the side of the deck which could cause problems with traffic that is passing on roads with small shoulders. They are going to be sitting down fairly low so a passing vehicle could easily overlook it and run right into it. Second, you are going to have to crawl over the door to access the compartment for loading and unloading. Third, they are going to weigh a fair amount so closing them up might be a bit of a struggle especially if the hinges get a bit rusted. A better design might be to split the door vertically and have two smaller doors that swing out horizontally with the front door skin overlapping the rear door a little to allow for a weather seal to keep rain out. You won't have to contend with lifting the door and they will be far more visible to other drivers. Just sayin.......

[@knutsir]

I agree with you :) There are so many details of this build that I would have done differently.

[@biker6991]

Agreed. Show me any truck that has drop down doors....!!!

[@thom17043]

I've got to agree with wingman from some similar personal experience. It looks fantastic! But I think you're going to find some practical issues with it over time. Wingman pretty much covers the ergonomic and safety issues with the doors. I'd also add that the gaps and steel/wood mixture is likely to have sealing issues over time and any amount of road spray finds a way to get into everything. That really limits the usefulness of the storage boxes. That also gives a place for water to get into joints and rust things out. At the very least I'd seam seal all the joints between sheet metal and structure.

[@Jankyyanki]

Yo bro...I've said it before but saying it again...your choice of music while you fab sends me to the right place...keep on keeping on 🤙

[@PeterHatch-mx7zc]

This hauler is one of the better ones out there it's a real credit to you!

[@mana-ma-non3072]

It must be said , one of the best combos on KZbin. On one hand you have one of the best smiles and on the other we have a super infectious laugh ❤

[@JohnFunches-qu1zg]

THAT'S ! SLICK! THE ROASTER, AND THE TRUCK HAULER - BOTH HAVE AIR BAGS 👍

[@donaldnichols2434]

That is one of the coolest tow rigs I've seen. The one the count has ( counting cars) is definitely the only competition

[@kennethewertz9313]

I can't imagine how great it would be to have a Brent working on my project. You don't even have to worry that it's going to be done as good as it can be. Man he really gets things done. Great job man.

[@Jools-j2l]

Excellent, you 2 really bounce off each other, quite the Dynamic Duo, unstoppable once you're focused on in one the Task.

[@kyleforeman4543]

Sick,sick,one special ramp hauler for sure, with best buds an friends that make the best memories Great job guys

[@MrRee-kn4xd]

This truck vid turned into my fave build video over the last month or so. Really cool watching you Canadians have fun from down here in the US.

[@laurensmith1828]

That thing is over the top!

[@jstickler76]

Agree the doors should flip latches down hood prop to hold them open. Much better accessibility

[@fonhollohan2908]

Damn Nice looking Ramp Truck! You all knocked it out of the park! cool looking " Ride " who would've ever thought, that when we use to see those old trucks driving around in the late sixties, early seventies that they would LOOK so amazing but here we are. " The Smile on Karls face freaking says it all. "

[@kennethewertz9313]

It looked like an awesome day to have the garage door open.

[@robertbennett9243]

That is one sick hauler. Hopefully the heating problem is an easy fix.

[@brucelucas1756]

This truck is looking absolutely fantastic. I've been following the build from day one and it's sooo nice to be able to see the final steps in its completion. 😁👍

[@dfusit]

The ease in which you two work together is impressive.

[@shanewright6958]

The TRUCK is looking good 👍👍

[@vickypratamaputra4363]

Truck is Awesome Collaboration with Make-It Custom

[@stuartfletcher2378]

You figure it out as you go , every thing has a place and a place for everything . Thanks for having us on this momentous occasion . God Speed . God Bless you all . Time waits for no man , Be safe Be Well ,,Stuart in Ontario..

[@flatworm00]

This is one massive Car Hauler! Looks really cool!!!!!!!!!

[@robbieshobbies93]

Damn, I don't know why I love this ramp truck build so much. Right from the start, I was hooked. This is looking so good. It's coming a long, real nice!

[@davidhatch2558]

Let Karl know the latest his ramp truck turned out awesome. Thanks for the video Brent

[@billyhaddock5540]

Congrats guy's on building an awesome/cool/one of a kind 71 GMC RAMP TOW TRUCK.... lv the color..

[@JohnSmith-is8nq]

I remember seeing these Molson and Labatt trucks moving beer around my area... up til what feels like not so long ago.

[@terryeustice5399]

Brent you men have done a ton of work in a short time. And are a great tag team. Thank you so much for sharing! 💯👊👍💯

[@1208bug]

Thanks Brent, I enjoyed watching you guys work and the progress!😊👍💯

[@Nitewatch-xc9yz]

That metal decking you pulled out,, maybe if you added punch louvers would help with cooling

[@josephacerra5987]

Oh yea Sweet Thanks for sharing

[@terrencebuller7676]

Nice job on the truck Brent. She is looking mighty fine. Take care and safe travels. 👍👍👍

[@johnwhitehurst474]

Big Steeering wheel need one of these....A brodie knob (alternative spelling: brody knob) is a doorknob-shaped handle that attaches to the steering wheel of an automobile or other vehicle or equipment with a steering wheel. Other names for this knob include suicide, necker, granny, knuckle buster, and wheel spinner.

[@timothymerritt620]

We always called them knuckle knockers

[@johnnyk4551]

Great video Brent - watching you two gentleman work together is such a pleasure. This truck is truly Awesome!!

[@lynnmccurdythehdmmrc2561]

It's very cool, watching your Video, then Karls.

[@matscarlsson3336]

Verry nice truck , many thums upp from Sweden 😮😮😮😊😊😊

[@jerrydespaltro4023]

Since the doors open down, you should make the boxes/shelves swing out or roll out like drawers, so you don't have to climb on the door to load and unload. Just a thought. The build looks great!

[@jackmehoff2961]

Minty ! Thank You for sharing your video, and letting us hang out . Later ...

[@daleking8529]

You guys did a great job! Truck is outstanding!!

[@CSmith-oz4wp]

Great video, thanks for taking me along on the voyage. If we get another video that’s means you made it. 👍😃

[@RichardBerry-v5i]

Nice job looks great 👍 you guys have done a great job

[@TrendsbySterling]

Just like the Lone Ranger and Tonto, a great combination! Good tunes too Brent!

[@rustyrodgarage2686]

Looking awesome

[@johnny535is]

Sick Carl ! Came out so wicked nice 👏. Great work

[@crbrepairmotorcycles6608]

Karl

[@kirkoglesby6175]

That thing is so kool! Smiles for miles.

[@LarryBunch-q7j]

This Truck is so cool!

[@hooligan_56labelle22]

Good thing Karl has help with this project cause it wasn't ending. Well done but a long project nonetheless. Looking damd good to

[@albertdehn8381]

Ben a long ride but what a end l👀ks great 😀👍

[@blackbuttecruizr]

Super cool, still thinks it needs a 12 valve Cummins in it though. ;-)

[@kevinmartin5489]

Quality workmanship, banter & tunes, perfect.

[@iraherrero9894]

Came out nice. Little concerned about the longevity of the plywood but only time will tell.

[@mitchelpinion1852]

Probably won't rust at least.

[@HalfassKustoms]

It is pressure treated.

[@kentmckean6795]

Coming along nicely!

[@theodoreharper4565]

Hello Brent and Carl, great progress on the project. I was thinking that four adult followers in the side compartments with you guys driving would be a dream come true. Carl I love your work and I still want to drive the mini Buick. I remember driving my dad's 1958 Buick. Excellent video and team work, THANKS.

[@stewartwoerle6351]

Great build vid, love watching the progress. Maybe a couple of electric fans in front of the rad would help with the cooling issue?

[@leecornelius1424]

Looks like Karl has a lot of fun work toys

[@tommccartney9472]

Put a second radiator right behind the front grille in series with the original.

[@eduardopedraza8480]

Saludos desde Lakeland Florida y Puerto Rico. Hermoso proyecto bonito trabajo.

[@RaySantamouro]

great music

[@rickaser2383]

LMight consider mounting that GMC in that louver above the grille opening. Most folks would not know it was relocated. Safe travels.

[@clarenceghammjr1326]

That deck looks way slippery- better back up on that and do a tire melting burnout for a little traction 😂

[@nv1493]

Im really particular about how I do stuff. I've got a friend like you that I can turn loose with total confidence, makes it a great work environment.

[@harrytaylor6854]

How cool is that wow looking great very well done guys .Just a little thing have to say some of the music was great as well

[@leecornelius1424]

1 heck of a picnic table lol

[@TheCrackerBox]

Thanks for another , Brother !

[@tonystandish4124]

Wow what a team ! Respect to all. From liverpool uk

[@DroooooopDead]

Love it

[@jayc4562]

I've had the aluminum diamond plate on boats and it does get slick. I had to paint it and when it was wet I put crushed walnut shells in the paint.

[@rondunlap4628]

wow soooooooooooooo sooooooooooo kewl great vision Karl . / Help from friends got er done now all the thoughts you had are ready to be enjoyed . dang so Kewl

[@buckeyejim2989]

🗿💨 a fella might keep an eye on rear dif fluid temp,, if it gets too warm find a spot to vent hot air out from under bed. 🔥 Caught Most of the build and love it. Karl needs a A+ for creativity 👍👍 He saw the potential when I didn't.. Thanks for sharing Brent

[@theodoreko2700]

Personally the doors should open out wards. The way you have them you can’t get close enough without stepping on them

[@NZMOPAR]

Open upward on gas struts . Small boxes are ok down but the front ones are huge

[@NZMOPAR]

I think they did it the other way because of the kick in the top part way along but I would have made it work . I bet he changes it before he paints it properly in the future

[@rustyaxelrod]

@@NZMOPAR- I think you’re right, thinkin the same thing. That huge door I gonna be in the way for gettin in there. The slope on the top does complicate things but these guys are pretty clever. I bet the hinges end up on the top before it’s painted.

[@georgesimeone6292]

How do you tie a car down on the deck?

[@NZMOPAR]

@@georgesimeone6292 its got big D ring all around the edge brother if you have a good look

[@cyberhornthedragon]

the weld spots gave the doors the ol battleship riveted look hey perhaps some loovers on that filler panel behind the cab for help cooling

[@johnkranz4004]

Great video Brent and Karl Truck looks Awesome

[@CSWmanofsteel]

Before final assembly make sure you guys paint the bottoms and entire outside of the wood for the boxes with marine grade paint, I know it’s treated wood but it’ll swell up and begin to rot 😎🤙🏼🇺🇸

[@1Independentrider]

You should use marine grade plywood. It will prevent rot a lot longer.

[@DependableAutoTruck]

Thanks so much for sharing great video hope trip goes good

[@briankinnear7461]

Great video. The truck looks spectacular. You two guys do some crazy good work and have a blast doing it. Great to see 2 friends have so much fun building a really cool looking ramp truck. Been following this on Karl's channel too. Look forward to the next one. Be safe and stay well.

[@MouradHmida-g1l]

bravo à vous deux , excellente combinaison des vos talents

[@demnis]

HI everybody from the D Mi 😎 hey thanks for sharing another great video and Awesome COE looks great and nicely done Gentlemen 😀🤩🔥💪🤙

[@mikeseldomridge8052]

Brent is the man!!!!!!

[@matttaylor373]

kool build !!! he should make some Subaru brat style boomer seats and put them on the bed right behind the cab. seating for at least two more!! thanks for the videos!!

[@giggitygiggitygoofg6069]

Was hoping that you were gonna bead roll some body lines etc into each of those panels to 1 stiffen them up & remove some of the oil canning noise & 2rd to give it more character below the belt line but you know wot your doing looks great regardless

[@realamerican6101]

Nice blue Ox.

[@garylamb4777]

Awesome 😎

[@brucemorris6319]

Trucks looking good 👍

[@matzrat5006]

Please make sure there is a positive lock, to prevent the cab coming down on someone working on the engine, lots of mechanics have been killed by cabs coming down on them. Love the build.

[@HalfassKustoms]

Yeah it's got 2 safty locks along with one on the deck a feller manually sets.

[@greengus5258]

Maybe in the future hinges similar to the one on baggage compartments on greyhound buses would allow for a smaller footprint when open.

[@raylovins2188]

Nice truck you guys

[@melshea2276]

Happy Friday Canada 🇨🇦 😊👍👍👍👍✌️

[@daboenterprize8265]

Definitely awesome job 🎉🎉🎉❤❤❤❤

[@jaywebb3105]

Karl, I can hear you all the way down here in NC. Enough with all the tin beating....lol

[@TrendsbySterling]

I believe I would have made the doors like barn doors opening from left to right coming together in the middle as to keep the door from hitting the ground. Just saying. Looks good anyway.

[@vickypratamaputravivo4940]

1971 GMC Ramp Truck

[@davidnelson6893]

Yes that truck is cool Peace out

[@BBBILLY86]

Slab sided bed would allow doors to slide open. Cam rollers in C channel tracks top and bottom would work.

[@LamontStorm]

That's one bad ass set up

[@tolomirog]

bravo les mecs l'Union👍👍👍👍 fait la force !!!

[@DanskRedneck]

Lolz insane how much happens when Brent are there

[@surindersandhi3924]

Hi My Dear Friend Very Very Great Job ❤❤❤❤❤

[@marca5883]

Dream team 💚🇬🇧🌱 awesome work guys