Loctite Red & Blue EXTREME Impact Vibration Test

See how Red Loctite 271, Blue Loctite 241, and Loctite Super Glue hold up after being tested in my extreme impact vibration test rig.
@hacksbydad
Thank you for supporting my channel through Patreon... / hacksbydaddisclaimer:
This video description may contain affiliate links. That means if you make a purchase or sign up for a service after clicking one of my links I may receive a commission, at no extra cost to you. As an Amazon Associate, I earn from qualifying purchases.
Thank you for supporting my channel!
Available at Amazon...
Loctite Red... amzn.to/3Hr2ByZ
Loctite Blue... amzn.to/3mBqdtb
Loctite Super Glue... ... amzn.to/3qEm05F
Please check out my Amazon Storefront... www.amazon.com/shop/hacksbydad
This video is for entertainment purposes. Follow the manufacturer's specifications for torquing or loading bolts for your specific application.

[@DinFKNSin]

Thanks Dad.

[@HacksbyDad]

You’re welcome! 😎

[@dwylhq874]

Excellent overview of Loctite Red & Blue! And thank you so much for doing the superglue comparison. We ended up using superglue based on your results as we don’t need resistance to high temperatures. 👌

[@bastian1847]

excellent video, thanks for being so exacting with your method, and so impartial. I look forward to more

[@HacksbyDad]

More?! 😳

[@bastian1847]

@@HacksbyDad more similar videos, I hope :⁠-⁠)

[@HacksbyDad]

@@bastian1847 Here's my Nuts and Bolts playlist... kzbin.info/aero/PL_WcGw5s6Cq6YK_s-NNne1838j25ijmii 😎

[@leegengxiang2173]

Thank you for this video.

[@MutahirRasool]

Thanks for sharing!

[@HacksbyDad]

You're welcome!

[@brandonbarker7817]

As a industrial mechanic this is most interesting. Thank you sir.

[@HacksbyDad]

You’re welcome! Thanks for watching the video and commenting! 😎

[@geoffhackett4472]

Thank you for this video! Likely saved me a ton of time and anguish on my next project.

[@HacksbyDad]

Glad it helped! What's the project?

[@geoffhackett4472]

@@HacksbyDad Adding vibration dampening to a sim-racing rig. Almost went with loctite blue on the feet.

[@HacksbyDad]

@@geoffhackett4472 👍😎

[@AGRIV8TD1963]

So many mechanics don't realize how important it is to have very clean threads for Loctite to work its best.

[@HacksbyDad]

👍😎

[@vaguincolombia]

Yep. It is a "glue". Every single glue on the planet needs clean surfaces. Thats why i hate threadlockers, they need always clean surfaces. If i can, i prefer to use a split washer.

[@AGRIV8TD1963]

@@vaguincolombia Split washers are No Good! Trust me! Better off with nylon lock nuts, or threadlocker.😅

[@vaguincolombia]

@@AGRIV8TD1963 Well Nylon lock nuts dont work with with fixed or soldered nuts. Also for very high temperatures nothing can beat a split washer.

[@AGRIV8TD1963]

@@vaguincolombia In a high heat area, use red Loctite. This guy has a video on vibration tests. For star washers, split washers, and double nut. I don't remember if he tested friction nuts!? They are meant for high heat, and high vibration. Check it out!😎

[@SevenDeMagnus]

Cool, red is the tougher one. I have both w/ screw spring washer combo sometimes. God bless.

[@HacksbyDad]

👍😎

[@rooster3019]

Test old school mechanical methods; staking the outward nt to bolt margin and then using safety wire through a drilled hole through thenut and bolt. I think I will start spot welding lol

[@rickrussell]

OK that was fascinating.

[@HacksbyDad]

Thanks!

[@user-zf5rv5kz5s]

Thank You..

[@HacksbyDad]

👍😎

[@Barbara-lu7ch]

Thanks.

[@HacksbyDad]

👍😎

[@docteurdre8450]

Wow really nice video. What are you recommending to secure bearing on shaft.

[@HacksbyDad]

Sorry... I can''t make a recommendation. There are retaining compounds for bearings and shafts, but I haven't used them.

[@docteurdre8450]

@@HacksbyDad okay thanks

[@zijie-he]

I never thought superglue is such great.

[@HacksbyDad]

👍😎

[@BushPigADV]

For torque purposes loctite is considered a lubricant. A wet torque spec should be used should be used on all the hardware including the control. That said, i think the difference between wet and dry is like 20% so only a 2.2lb value in this case. I don't think it would make or break your experiment.

[@HacksbyDad]

That's what I thought before conducting this experiment... kzbin.info/www/bejne/iX2lqWNvetOShpI Watch until the end to find out what the experts at Nord-Lock say as well. 😎

[@MikkoRantalainen]

I would recommend trying higher purity isopropyl alcohol. The stuff meant for antiseptic purposes may contain oils meant to avoid drying the skin so much. Try something meant for electronics repairs because those are designed to evaporate to fully clean surface.

[@HacksbyDad]

Thanks! I have 91% IPA and might give it a try. 😎

[@1arm_658]

The hardware looks like it may be plated in some way. Please note that Loctite needs active metal ions to fully cure. If you have corrosion resistant hardware, you have to use Loctite primer to get full cure. Super Glue or CA adhesive does not need active metal ions.

[@HacksbyDad]

Sort of. Zinc is more of a passive metal than an active metal. kzbin.info/www/bejne/g3Lcentqnpulr6s

[@pleappleappleap]

I'm curious how it works with Loctite on a top lock nut.

[@HacksbyDad]

Thanks. I might conduct more threadlocker experiments in the future. 😎

[@kodeyv6510]

eh you from Hawaii? I can hear the Piggin brah!

[@HacksbyDad]

🤙🏻😎

[@dalefrolander3583]

I wonder if the superglue would work even better if sprayed with a superglue accelerator.

[@AGRIV8TD1963]

Superglue will damage the threads over time. It's corrosive.

[@HacksbyDad]

Interesting… if that’s true, why do manufacturers say their superglue can be used on metal if it will eventually corrode the metal and fail? I might do an experiment. How long before the corrosion will be visible… 1 year? 😎

[@AGRIV8TD1963]

@@HacksbyDad It will also break down over time, depending on how much weathering it gets, whereas Loctite will not. It won't even take a year.

[@HacksbyDad]

@@AGRIV8TD1963 👍😎

[@ifell3]

So, if you are going to build a sex machine..... Use red or superglue On a serious note, great test experiment and it's really good to get some superglue figures!

[@HacksbyDad]

Thanks! 😎

[@hasansheriff4310]

If you're gonna use the blue glue, you might just busta nut!

[@AGRIV8TD1963]

Sorry to say, you made an error during application on many of the samples. You can not get Loctite on the mating surfaces. Only on the threads.

[@HacksbyDad]

Sorry… I’ll try to avoid that in the future. What impact does it have on the fastened assembly? 😎

[@AGRIV8TD1963]

@@HacksbyDad Potential to fail. If fact, the best way to use Loctite is to apply it to the threads, then let it set up for a few minutes, then attach nut, torque as needed. Because the act of screwing on the nut, heats up the threads enough to make the Loctite fluid again. Therefore proper penetration.

[@HacksbyDad]

@@AGRIV8TD1963 I did this experiment to show that Loctite does not cure when exposed to air... kzbin.info/www/bejne/onero2Somrl3jZo Maybe loosely thread on the nut, wait, and then torque?

[@AGRIV8TD1963]

@@HacksbyDad Loctite doesn't completely dry when exposed to air during the time needed for application, but it does set up. It will dry over time. Thin coat of Loctite all the way around the bolt, wipe off excess if any. Put a thin coat all the way around the threads, then check it in 24 hours, then tell me if it had set up. Then do the same, and check after a week. Did the Loctite dry?

[@HacksbyDad]

@@AGRIV8TD1963 So you apply Loctite, wipe excess, let cure for a few minutes, thread on nut, and finally torque?