How to Use the Dremel 565 Multipurpose Cutting Kit / Router Attachment

Hello! Here's a quick guide to the Dremel 565 Multipurpose cutting kit. Please let me know what you think in the comments! Thanks for watching.
Like what I share and want to support the channel? Buy me a coffee at the link below
ko-fi.com/logscarvingclub
Thank you for watching!
Amazon links for the tools and accessories I use below:
Amazon Prime 30-Day Free Trial:
amzn.to/3BqW2tz
MY TOOLS:
Dremel Flex Shaft: amzn.to/3ehsAJG
My Dremel 4300: amzn.to/3DOBhFJ
My Dremel Lite: amzn.to/3J4b61P
My Dremel 8220: amzn.to/3pj32Ch
My DeWalt Orbital Sander: amzn.to/3PJHN7A
The oil and wax I use: amzn.to/3sBv2Dv
My most used bits and burrs:
SHAPING:
Dremel 561 amzn.to/3dOQpIw
Dremel 562 amzn.to/3rVsSy9
CARVING:
Kutzall Xtreme Flame Burr amzn.to/3yl8veT
Kutzall Original Taper Burr amzn.to/3m0TVnN
Tungsten Carbide Burrs amzn.to/3s4S4Ct
Router Bits amzn.to/3d3niEh
ENGRAVING:
Dremel 191 amzn.to/3DScmkG
Dremel 106 amzn.to/3F46sP3
Dremel 111 amzn.to/3m0zA1Q
SANDING:
Dremel 84922 amzn.to/3GFMvhw
Dremel 407 amzn.to/3pPbp7V
Dremel EZ402 amzn.to/3yhJote
Polishing Wheels amzn.to/3oNDxsP
Dremel Sanding Disks amzn.to/31UsoNR
“We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites at no extra cost to you.” "As an Amazon Associate I earn from qualifying purchases."
Kutzall Link:
5% off Kutzall products with promo code: DREMELTIME (in uppercase) kutzall.com/collections/flame...
Wear a mask, eye protection, and hearing protection, and consult your tools' manuals prior to using them to ensure safety. This video is for my insta @logscarvingclub.
If you're looking for more wood carving designs and videos, I recommend watching the video where I carve a greek paddle with a Dremel 4300. I use Walnut, Poplar, and Epoxy! The epoxy was a hassle but came out really cool.

[@Larshhhh]

I have all this just sitting in my cupboard and didn't even know what it was (the attachment), and it's just what I need. Best afternoon I've had in a while. Thanks man, nice demo.

[@LogsCarvingClub]

Hi guys, just wanted to mention I have 3-4 of these simple tutorial style videos planned for the next few weeks, but then after that I'll be going back to the more complex project videos. About 7 of those planned out to be posted every other Friday. Thanks for being here!

[@sfrskz]

you are the only person i found showing which bit does what. thank you

[@LogsCarvingClub]

Thanks for watching! Glad you liked the video style

[@Crashawsome]

There’s literally a crapload of videos showing this

[@SimonTyler_humanfly]

Small point of order: I think router bits are meant to cut in a specific direction. Your first cut with the router bit looked very rough, the bit is much more likely to skitter around when it's going the wrong way. This can lead to the bit jumping off or jumping around on the part, damaging your wood, and with a more powerful router can be very dangerous. It's much easier to control if you start with a shallower cut, going in the right direction. It's not such a big deal with the dremel but if you do that with a full size router, you may regret it. Carry on

[@wesleypipesgaming19]

Dude, this is exactly what I was looking for. I really appreciate the time you take to make these videos.

[@LogsCarvingClub]

Thank you so much!

[@ricestrawdiy]

I am now learning how to use the Dremel tool. Thank you for your valuable teachings. I hope your channel develops.

[@LogsCarvingClub]

Thank you! I’ll work on it!

[@lfrankow]

just like you said at the beginning. a lot of videos are drawn out or slow-paced and end up wasting time. this was very well done and worth the time to check it out. thank you!

[@LogsCarvingClub]

Thank you! I’m happy you enjoyed it

[@richardclowes6123]

Definitely one of the better demos of the 561 cutting bit. Now I know which bit to get that's my next experiment. Thanks.

[@LogsCarvingClub]

Awesome, and thank you!

[@rv5208]

I love your videos, very concise, fun and informative! Keep it up!

[@LogsCarvingClub]

Glad you like them! Thank you

[@AnitaBetterScreenname]

Thanks for putting these videos out there! I just got a few extras for my 300 series Dremel. I REALLY needed this! Clear and concise instructions and demonstrations. Great job!

[@LogsCarvingClub]

Thanks for commenting! I appreciate it.

[@donaldlemoine3032]

Now its time to search for my dremel. Great Idea!

[@LogsCarvingClub]

Thank you Donald!

[@ACPANAMA507]

Thank you so much! Found the tool laying around and I had no idea how to use it 10/10🎉

[@LogsCarvingClub]

You’re welcome, glad I could help!

[@lurklingX]

thank you for being short and to the point!!!!

[@LogsCarvingClub]

You're so welcome! Thanks for watching

[@JockStrapified]

Thanks for the great info! I’m really excited to start doing some projects with the Dremel

[@LogsCarvingClub]

Thanks! Good luck!

[@lisakay8798]

Thank you so much!!! Concise and very informative!

[@LogsCarvingClub]

Glad it was helpful Lisa!

[@Johnny-jr2lq]

Thanks for sharing this information. I appreciate it

[@amandacooper7879]

Thank you for this video. It's really helpful

[@LogsCarvingClub]

No problem! Thank you Amanda

[@slodown3670]

Excellent video explanation! Many thanks! Dermot

[@LogsCarvingClub]

Glad it was helpful! Thanks for commenting

[@therespectedlex9794]

1:25 A bit more! 😂 Good one

[@billhandsaker7527]

Straight up- no fluff.

[@LogsCarvingClub]

How every video should be!

[@03030367]

Thanks, that’s a good information.

[@LogsCarvingClub]

I'm glad this was helpful! Thanks for commenting.

[@kathymclaughlin4364]

Thank you so much for a clear and concise informational video that thoroughly explained exactly how to use this attachment. It was very straightforward and to the point. Now to put your information to work! Thanks again!

[@LogsCarvingClub]

Glad it was helpful Kathy! Thanks for the support.

[@dillonhayes3402]

Cheers mate im looking to slap together a little box for different color silicones for work wanted to cut slits for dividers or dados ive learnt theyre called over the last 2 hrs of searching and i dont have a table saw or router so this is exactly what i needed to see

[@LogsCarvingClub]

Great to hear it was helpful Dillon - good luck!

[@kimdivine8988]

Thank you

[@LogsCarvingClub]

You’re welcome!

[@joshisennagle7272]

Father loves it

[@LogsCarvingClub]

Great to hear!

[@johnmitchelljr]

Thanks.

[@LogsCarvingClub]

You're very welcome.

[@Mr.Thermistor7228]

Thanks for getting straight to the point. I despise all these youtube jabronis babbling on about stupid irrelevant crap happening in their lives for 10 minute before getting to the subject of the supposed video.

[@alexwolf8019]

It will work with the 8250 also if anyone is curious.

[@LogsCarvingClub]

Great to hear! Do you like yours?

[@briandacy597]

Great videos, thanks. Can you recommend wood carving templates for beginners.

[@LogsCarvingClub]

Hi! I don’t really use templates, I just trace outlines or free hand them and get going

[@NPu2]

Do you have a video on creating templates? Looking to create repetitive shapes with consistency (less freehand) and not in the market for a laser cutter/cnc

[@LogsCarvingClub]

I’ve never gotten into repetitive things since I’d get bored so I haven’t used a reusable template other than cardboard ones for animal carvings. I’d probably just use very thin plywood and freehand it out with the 561 or 562, then get a 90 degree edge with the sanding drum. Not sure sorry

[@TheArrowOnFire]

Hi, thanks for your great videos! I was wondering all of those black guildes are actually different or the same. I'm about to order 565(multipurpose) and 566(tile cutting) kits, but it looks like a duplicate to me.

[@LogsCarvingClub]

I want to say they’re the same. I just got the 565 kit and the 562 separately

[@TheArrowOnFire]

@@LogsCarvingClub Oh, thanks for your reply:)

[@sqkwe]

💪🏻🙏🏻

[@LogsCarvingClub]

💪💪💪

[@ruanpienaar5400]

Do you think this will work with the Milwaukee m12 rotary tool? I need to cut drywall and I dont want to have to buy another tool.

[@LogsCarvingClub]

Sorry I’m not sure, maybe if the end threads off and matches the thread size for the dremel?

[@scottnei1377]

Sure wish there was a way to attach dust collection. Hard to follow a pattern with all the dust this makes. Any ideas?

[@LogsCarvingClub]

I agree, usually I tap out the dust or use the air from the dremel to blow it out. I’ve seen third party dremel shop vac attachments but nothing for this attachment

[@MrBlackTorch]

Hey where did you get your Router bits from?

[@LogsCarvingClub]

Amazon, gimme 5min I’ll link them in the description

[@LogsCarvingClub]

Just linked it as 'router bits' under the carving section in the description

[@cymeriandesigns]

When using router bits like your roundover, it will cut much smoother if you only cut in one direction, namely the one that's going against the rotation of the blade. In the other direction, the blade digs into the wood and pulls the tool along, resulting in a rough cut. Ask me how I know.

[@LogsCarvingClub]

Thanks for the tip! Usually I’m pretty casual with it because I sand it later anyways. My stuffs more natural lines rather than clean furniture style routing.

[@tshadow6]

Does any router bit fit? Do I need to buy Dremel specific router bits?

[@LogsCarvingClub]

The dremel can fit with any shank that’s 1/8th inch - You’d just have to make sure it’s low profile enough and long enough to fit in there I guess

[@LogsCarvingClub]

My router bits are a random knockoff brand

[@tshadow6]

Do normal size router bits fit is what I’m asking, or are smaller size bits needed?

[@LogsCarvingClub]

@@tshadow6 I’m not sure what size normal router bits are, sorry. I’m limited to my rotary tools

[@tshadow6]

Thank you.

[@COEYRN]

Sorry? If I. Missed it but at? The end. Of these? Bits? The. One that slots into the drama there's a slot. It looks like a screw head what is that for?

[@SpaceMike3]

The first example could be replaced by a saw. Imo another demonstration would be better suited for that bit. None the less good stuff I've learned something

[@LogsCarvingClub]

True, maybe using it against a curved jig would have been more interesting. Thanks for the feedback

[@MedoHamdani]

Can it be used to spray air?!

[@LogsCarvingClub]

Don't think so. You can check out the Dremel 490 Dust Blower though if that's what you mean.

[@MedoHamdani]

@@LogsCarvingClub Also, if the bit is stuck in the mounting, is there is any possibility to take it out, will opening the whole tool would solve the issue? Thanks

[@LogsCarvingClub]

@@MedoHamdani Check out my second channel if you can, it’s Log’s Carving Club Plus. I have some details on that in the How to Change a Bit video. Hope that helps.

[@MedoHamdani]

@@LogsCarvingClub Alright