The Kohler engine in my John Deere riding mower lasted 33 years, and was still running fine when I sold the mower. Phenomenal!
@coburnlowman3 жыл бұрын
That's not the same engine. Not by a long shot. I have Kohler's stacked around my shop like firewood that have been made in the past 10 years. These are not people who don't service their equipment either. Some service issues are to blame , but Kohler has dropped the ball. Possibly this EFI 27 HP is a tank but the lower HP is garbage. The engine you're talking about was built to last and be past on to your grandchildren as well as the mower it was on. Now everything disposable.
@rogertycholiz22183 жыл бұрын
Thomas - Kohler WAS the best! Back then they made the engines of cast iron, now they are made of aluminum alloy.
@rugby38742 жыл бұрын
I have one of those 12 Kohler engines on my little wheel horse tractor , I still use it. It smokes a little but it has a lot of hours on it.
@TheJustinJ2 жыл бұрын
The old ones were cast-iron blocks. Heavy and low(er) horsepower. They were also made to last, and not pass emissions standards. Now they are made as cheap as possible, lots of plastic bits, spacers, washers, etc. And also tuned lean for emissions/economy.
@peasantsarerevolting93432 жыл бұрын
I had mixed results with Kohler. Never had issues with single cylinders. My latest is a 22hp vanguard, I had a pushrod bend on one cylinder head about years ago. knock on wood, I hope that's the worst thing to go wrong...
@carpenter1231544 жыл бұрын
I've been exploring all three engines. Thanks for taking the time to explain the various qualities of these power plants.
@LoneStarHovercraft4 жыл бұрын
No problem! Glad it was helpful
@ambersmith65172 жыл бұрын
@@LoneStarHovercraft yes thanks
@dudleycornman16243 жыл бұрын
I've had a couple personal Kohlers one an 18 and one a 22 and no complaints. I work at a golf course and we have 4 mowers with the 18 Vanguards on them. They easily run 5000+ hours as long as you keep oil in them. :) We have lost a couple due to the oil filter getting punctured.
@Omegadoomship Жыл бұрын
I have used all three. My favorite is the Vanguard. Haven’t really had any problems with the Vanguard engines. They’ve made them for a long time but some of the engines are harder to get parts for particularly the older engines where they changed to a newer style piston and flywheel assembly that requires buying expensive conversion kits. I’ve had Kohler engines that have ran good and other that are always having problems. There have been many variations of the engine that have come out over the years and some were problematic with had gasket problems and ignition systems. They also had problems with the magnets on the flywheel coming off and destroying the alternator. But overall they are strongly built engines. The predators are a mixed bag of quality but overall they are decent enough. They have terrible fuel pumps and we’ve had a few engines fail prematurely. I generally steer away from them since they are a roll of the dice of how long the engines will really last. I’ve a brand new Predator apart and found metal shavings in the crankcase and some of the bolts were not torqued correctly.
@mchl83 жыл бұрын
I ran the Kohler 25 hp v twin on a brand new cube zero turn. Non efi flawless I ran that an entire summer . I left n want on it was still working fine the following season.
@frankensteinrules65112 жыл бұрын
Thanks for the video. I'm 70 and have worked on small engines all my life. The predator is a Honda clone. Don't care much for the Krocker, or the Briggs an Scrapthem. It' hard to beat a real Honda. But then again they can all be good engines, it all depends on proper maintenance. Thanks again for a great video.
@DavidSmith-fr1uz2 жыл бұрын
It's a shame about Briggs. They used to make a good engine. I have two old Sears Suburbans with Briggs on them since back in the 70's. One a 12 and the other a 15hp, both single cylinder. I used them as mowers, mini bush hogs and scraping the driveway. They both held up beautifully and still run fine. But, they were built years ago.
@Dboyquicks10 Жыл бұрын
There's nothing wrong with the vanguard engine. Easily comparable to Honda. Very solid power plant. The Kohler on the other hand are plagued with head gasket issues.
@kenneth9874 Жыл бұрын
I've put a over a decade of hard use on the Vanguard mounted on a go-devil
@jacklowe3788 Жыл бұрын
I'm a farmer been running all of them for many many moons & Vanguard is the best by far-Only predators I buy nowadays is single cylinder for small applications which they done very well especially 6.5hp -Other than umpteen thousand of hours on Kawasaki engines on Zero turns- I'd say Kawasaki will run long time w/ rod knocking-
@vg23air Жыл бұрын
hondas are terrible
@jeffinetlyjeffbi97703 жыл бұрын
Wow just "happen to have" that's awesome. Thanks for your happenstance. Beautiful motors. Gave me a raging jeffro.. love it like #3 the best though
@MrDillon20293 жыл бұрын
I have a kohler command v twin 21hp and it’s on my mud mower and still runs and drives to this day had it like 12 years
@LoneStarHovercraft3 жыл бұрын
We love the commands too, they run great and take a lot of abuse
@paulg4443 жыл бұрын
Im going to repower with the $1800 Kohler !!...that way my 200$ garden tractor will be worth 800$ when I'm done!!!
@Mattlawton-ft6ew2 ай бұрын
🤣so true👍
@flatstheflounder98743 жыл бұрын
I have the Kohler KT725 22 horsepower 725cc V Twin Engine in my Craftsman T240 it's a beast...the engine came with a 3 year unlimited hours warranty that also covers commercial use
@Omegadoomship2 жыл бұрын
Just an FYI, the 725cc Kohler engines can actually make at least 25 HP if you swap out the carburetor for a carburetor from a 25 HP engine. The difference in the carburetors is either the size of the intake orifice, the throttle butterfly valve has a limited range like what Kawasaki does with their engines, or the jet sizes are different. It could also be a combination of things.
@rubenvor2 жыл бұрын
Great compare! Thanks for sharing. I'm in the market for one of those for an air trike, this video is very useful.
@daszieher Жыл бұрын
There are people making entire engine kits with PSRU and upgrade parts. That's the way I would go to save myself some headache.
@KevinArmstrong41543 жыл бұрын
Chose the Briggs for my Ultralight project, tuned it using high lift cam combined with higher lift roller rockers and 4mm packers under the valve springs. To raise compression added shallower dished pistons, billet rods and thin head gaskets. All worked well for 120 hours until the 280 degree camshaft broke, so anyone going this route make sure you add either a billet cam or steel reinforce the middle with 11mm drill rod.
@KevinArmstrong41543 жыл бұрын
The Briggs cover gasket leaked as the crankcase flexed, is the Kohler a stronger, more rigid design?
@LoneStarHovercraft3 жыл бұрын
@@KevinArmstrong4154 I’m not sure if the Kohler’s crankcase or engine cover are stronger. We haven’t had oil leak from the engine cover gaskets on either type of engine before, but we’ve only run them stock without any modified internals, so it could be with stock horsepower, the redrive doesn’t put enough stress on the engine cover to cause a leak
@sevtecsev4 жыл бұрын
Used the 16Hp Vanguard vertical shaft version and 26Hp Kohler on my Sevtec Hovercraft program for some 30 years until I wore out. Things went very well except for excessive vibration due to light flywheel.
@trademarkoutdoorservices2363 Жыл бұрын
Could you asnwer a question. I have a dingo tx 425 and I want to know if another engine will go in the place of the kohler command pro 25
@bryanbressem50263 жыл бұрын
Most important issue, price, not a word on that but it's important to most
@lewiemcneely91433 жыл бұрын
@Daniel 045 It is for me. I run 15 /40 Delo diesel formula oil and would NEVER pay for a Kohler UNLESS I could find a cast iron 301. Would most likely go with an 'L' head Briggs like the opposed twin Vanguard or an I/C. And I don't run mine hammered either and keep clean oil and no alcohol gas in them. And two are 85 models. And the Preditor starts on the 2nd pull every time. But the Briggs and 301 does too. Oh well. It's just me though.
@jacklabloom6354 жыл бұрын
Helpful information. Good video.
@RulgertGhostalker Жыл бұрын
i designed an augmented split big surfboard catamaran air-boat. the flotation augmentation, to the two half surf boards, was not much; so i went with a Valach Motors VM 210, which is extremely light for a 16 HP motor. i would think any of those large model airplane engines would be at least worth considering for light air boats.
@smeizO9 күн бұрын
Im wondering the best repower for a Ferris procut s turn...yes i like it way better than any z turn
@terrylutke2 жыл бұрын
Pound for pound the 23 Vanguard is hard to beat. Belt reduced w/ 68" 3 blade prop will produce in +-160lb static thrust. The Predator will push as hard as the Vanguard 23 but it weighs more, and for what it's worth there's the made in China factor. Both of these engines can benefit from a carb change and exhaust mod. Pull starter on the Vanguard is a novelty option for this engine class, and it's truly 'man's work' to crank over. If someone is desperate to save 10lbs+-, it's possible to keep the pull start and remove the 12v starter and associated battery (maybe even the e-start ring gear & battery charge system)
@terrylutke2 жыл бұрын
@@ricorico6698 2.25;1 ratio mostly. although 2 to 1 works fine. Faster prop speed usually requires a larger driver pulley, which helps to delete belt slip and slightly lowers required belt tension.
@joshmanis98602 жыл бұрын
I would keep the pull start as a backup
@vg23air Жыл бұрын
@@joshmanis9860 no one in an engine out is trying to pull start, if they are, they should be flying the plane instead, i just watched a guy mess with the started and the enrichment all the way donw to a crash, instead of just flying the plane
@joshmanis9860 Жыл бұрын
@@vg23air ive pull started my 17.5 intek single ohv with valves out of adjustment and it wasnt that hard
@76629online3 жыл бұрын
Why didn’t you do a cost comparison?
@tomhenry58704 жыл бұрын
Make your own dyno by making a run stand that can rotate on the center of the crank then use an arm and scale to measure torque. See flycorvair for a great example.
@magnavox37942 жыл бұрын
Kohler engines were built to fit John deer and wheel horse but you can make them fit in some pretty tight places
@Omegadoomship2 жыл бұрын
A lot of engine conversion kits for John Deere’s are for Vanguard engines. I’ve done countless conversions for 316 and 318 tractors for customers where the Onan engines were either worn out or blown up but the tractor was still in good shape. Everyone who I did the Vanguard conversion has been very pleased. I have swapped on a Kohler engine once and they are noticeably bulkier than the Briggs. They are both good engines but depending on the tractor, the vanguard is easier as a universal engine swap option because it is so compact.
@jasonmaddox89132 ай бұрын
Vanguard has been super reliable for me, I push my engines hard and it seems to take it in stride
@miketrentham66323 жыл бұрын
Briggs for me. Never had ANY luck with kholers.
@DumbCarGuy11 ай бұрын
I bought that kohler 26.5hp EFI engine 3 yrs ago. I put in on my shelf and never used it. It still sits there. It has the cold weather muffler just like the one on the red bench. So its still brand new, never started. Spoze i should do something with it, eh.
@matthewtrask35957 ай бұрын
Heh, or you could sell it to me
@kevindouglas206010 ай бұрын
About a dozen years ago I built equipment around vanguard and Honda engines. I used different engines because they were for different companies. I didn't want either to say I stole the design for their equipment so all the parts I didn't make were from different manufacturers. I really couldn't see any important differences and all the equipment lasted for years of hard use. I really thought that the vanguard was a slightly better value. The people using the Honda thought it was a better brand. I thought both were great and would use either if I was making something for myself. I think if I was building something for myself I would look for something with a carburetor. Fuel injection seems unnecessary. A carburetor is simpler and on such a small engine more logical regarding repair.
@alexmaceachern39813 жыл бұрын
Honda gx 630 660 and 690 are my go to. That’s just me but I’ve run a 660 for 6 years hard and it’s never let me down
@Johnclark3003 жыл бұрын
Honda is #1 they build the best to hell with all three of the brands he was telling us about wont waist my time or money I have a honda 690 in my go kart and I beat the crap out of it and it keeps asking for more Honda performance first
@kevincraig82572 жыл бұрын
Cant find a honda not available
@kenneth9874Ай бұрын
I've doubled that on a couple of Vanguards.....
@knockknockwhosthere80553 жыл бұрын
Do not let nitpicking people bother you. you're walking talking and holding camera was just fine. The nerve of some people they talk crap but do not have the balls to do what you do. And even the ones who do what you do that talk crap. they're. just jealous. of you. that's all.
@mikelindhorst317210 ай бұрын
I have the kohler .its 4 years old with 175 hours .. right now as soon as i put it under load it chokes out and black smoke... having hell a time trying to figure out whTs wrong
@ronaldpeterson15383 жыл бұрын
I need a Koeler for my Cushman Trackster...love EFI
@Nonameguzzi3 жыл бұрын
Briggs and Stratton also Makes an EFI version of most of the Vanguard V-Twins.
@victoryfirst28783 жыл бұрын
I can say from experience that the predator engines are the cheapest for sure. The Briggs are the middle engine and the top dog is the Kohler. Will pay more for a Kohler as that is the most reliable engine I have used and love. V
I’d go with the Kohler. The predators are good but but like he said, the fuel pumps are trash and I’ve also found that the predator stock carb does not hold a tune very well. I don’t have experience with the larger Briggs and Stratton engine but all the small ones used on the generators that I have seen use a little oil and if you don’t watch it will throw a rod.
@stevieray18282 жыл бұрын
What do you mean by hold a tune?
@Omegadoomship2 жыл бұрын
The smaller vanguard engines should use much oil at all. The larger vanguard do use a little more oil but not enough where you have to top it off every time you use it. As long as you stay on top of it, it’s fine. It’s normal air cooled engines consume a tiny bit of oil especially as they age but some do consume more than others. The big block Kawasaki engines are notorious for high oil consumption. Haven’t seen too much oil consumption from the vanguards unless they were not very well maintained or have high hours. Kohler is a mixed bag with oil consumption. It usually has to do with blown or leaky head gaskets. Newer engines that run lean from the factor to combat emissions eventually have high oil consumption as a result.
@Omegadoomship2 жыл бұрын
The stock predator carburetors are ok but are really only meant for wide open throttle and that’s it. They have flat spots in the part throttle range where it falls on its face. The fuel pumps that come with them are weak and trashy. You can get replacements online for cheap and they usually last longer too. Remember that quality control with predator engines is a hit or miss. You could get a good running engine or get one that lasts a few months before it conks out. I speak from experience as a small engine mechanic.
@Ntajneeb743 жыл бұрын
I have both the predator and vanguard engines that you shown here on my jon boats. I struggle to start the predator engine every time. I believe you mentioned changing the fuel pump. Will that improve startup?
@LoneStarHovercraft3 жыл бұрын
It can, although it sounds like you might have a different problem like something with the carb tuning. The exception is if your engine is more than a foot or so above the gas tank, then the stock fuel pump is too weak to pump the gas up to the engine
@Omegadoomship2 жыл бұрын
You can use an electric fuel pump but keep in mind you will need to run a return line to the tank. These carburetors are can’t handle a lot of fuel pressure so a return line is required.
@adambutler18162 жыл бұрын
Hi Ben. I have a 30hp Kohler that backfires under load. How can I troubleshoot this problem?. Engine is on Lucas mill.
@marcelmartinez22372 жыл бұрын
Mine was a coil starting to fail. I replaced both and my problem was resolved
@canoe3653 жыл бұрын
Do you have any fuel usage numbers on EFI vs carb? Great video, very helpful, thanks!
@JF323043 жыл бұрын
Nobody cares about fuel economy on a twin cylinder.
@johnettipio Жыл бұрын
@@JF32304 Glad you are able to speak for everyone's application. Fuel economy is probably less important here than it is in a car but, some V twins can be found on large generators. I would like my generator to run longer, with less fuel. These can also be found on riding mowers. I would bet that a landscaping business spends a lot of money on fuel. When somebody asks a question, a rude response like "nobody cares" helps no one.
@JF32304 Жыл бұрын
@@johnettipio cool. I have no idea why you commented on my comment. I read it and it didn't name sense to write it honestly. We all know v twin don't use much fuel and THIS is all dependent on the load being applied. Have a wonderful day!
@ANDERSONEXPRESS7 Жыл бұрын
Vanguard will always best
@erneststorch98443 жыл бұрын
You said that the Harbor freight engine has a small output shaft @ 1" but the Briggs and the Kohler looked by my eye to be about the same size. What are the sizes of the Briggs and Kohler?
@LoneStarHovercraft3 жыл бұрын
The Briggs and Kohler have 1-1/8" output shafts
@eduardorivera91013 жыл бұрын
1/8th of an inch doesn't make a difference in shaft size
@LoneStarHovercraft3 жыл бұрын
It does if you’re direct driving a propeller
@markchidester62393 жыл бұрын
@@eduardorivera9101 More than one might think.
@robbygray95623 жыл бұрын
@@eduardorivera9101 thats not what she said!!!
@hammer1bad3 жыл бұрын
I like the Briggs that you have pull and electric start
@LoneStarHovercraft3 жыл бұрын
So do we, it's the only engine this size we've seen that has the pull start backup
@tacomas96023 жыл бұрын
@@LoneStarHovercraft it must be retardedly hard to start in the freezing cold
@bryanst.martin71343 жыл бұрын
That reminded me when a friend and I modified an old venturi shrouded fan to use with a horizontal shaft mower engine. It worked, but not impressive. It served best as a weekend project to get out on the water. Inches of water though. Might have been faster if I put a skirt and a diverter on the fan... :-)
@robertwood397011 ай бұрын
Have you had any issues with the crankshaft thrust bearings in any of these engines mounting a direct drive prop?
@stevetalbert27273 жыл бұрын
Kohler and Honda are the best .
@rugby38742 жыл бұрын
Vanguards are really dependable.
@byronschroedel4322 жыл бұрын
Not any longer, they are garbage. I have been waiting six months now for Briggs to replace a motor that detonated on the top end from a undersized valve retainer.
@kenneth9874 Жыл бұрын
I've got thousands of hours on a 23 Vanguard go devil
@bryankincaid7631Ай бұрын
what do think about the kohler powering the challenger ll
@jimeckenrode12712 жыл бұрын
I have been shopping for a zero turn mower and I have heard the Kohler's have an overheating problem and I have heard good things about the B&S Vanguard motor.
@Omegadoomship2 жыл бұрын
Yes the Kohler engines have been developing overheating issues due to poor carburetor designs making them run too lean and the plastic intake manifolds with the dinky o-ring gaskets tend to cause a bad vacuum leak and make it run lean or surge. The Vanguards don’t seem to have as bad of an issue. They haven’t changed the base engine design all that much since they were made over 30 years ago. However the newest vanguards also have some carburetor problems but that’s usually due to letting them sit with bad gas in them. The Nikki carburetors that both Briggs and Kohler put on their engines are kinda terrible but less so on the Briggs vanguards.
@jimeckenrode12712 жыл бұрын
@@Omegadoomship thank you
@Gronicle1 Жыл бұрын
I was just wondering if you have to disassemble, clean, and adjust/fix the Chinese made engine before use? I made the mistake of buying a Chinese milling machine some years ago and it was a hot mess as it came in the door.
@XaviarJS4 жыл бұрын
What motor would you recommend for tracker Grizzly 2072 Jon boat for a air boat conversion?
@LoneStarHovercraft4 жыл бұрын
If it’s for bowfishing, any of these engine would work great, especially paired with a belt reduction drive and 54” propeller. If you’re looking more for airboat performance (planing out a lot of weight), you’d need something much bigger. like a small car engine.
@kenneth9874 Жыл бұрын
People are using rotax engines with great success
@billhillyer3347 ай бұрын
I've got a 24 horse Honda engine inch and an eighth shaft Dylan on how good them are
@southernlineman2 жыл бұрын
How hard would it be to do a mini-air boat using a Yamaha V-Star 650cc engine or even a Yamaha Roadstar 16/1700cc engine?
@matthewtrask35957 ай бұрын
you have all the additional mass for the gearcase and gears
@coltensawyer676110 ай бұрын
Hey what is the weight of the Vanguard without the muffler ? I’ve been trying to find this for ever
@laserfalcon4 жыл бұрын
Looked at mowers recently compared the 7000 series kohler to the intek,. The intek looked very weak. May of been good yrs ago but seems cheap
@LoneStarHovercraft4 жыл бұрын
Agreed, As far as I know, Intek is Briggs’ economy line, and are built with cheaper components. The Vanguards are built a bit tougher and will take a little more abuse
@DeanMk14 жыл бұрын
@@LoneStarHovercraft Vanguard is B&S's line of commercial engines, so they're designed and built with a little more abuse in mind.
@ayp19383 жыл бұрын
inteks are garbage, the vanguard is their commercial engine
@marcmo71383 жыл бұрын
@LaserFalcon I hope the Kohler 7000 series are reliable. I just bought a cub cadet zero turn with the 22 HP Kohler. I had a Kohler Courage that didnt give me any troubles for 14 years even though it is considered the worst Kohler ever. Bath tub design is cool as long as the case bolts dont back out and mesh with the flywheel cracking the block. Also the plastic cam gears.
@laserfalcon3 жыл бұрын
@@marcmo7138 I hope so as well. I remember a time when most things you bought held up for yrs, any more im not so sure
@miklomorales47683 жыл бұрын
Would the vanguard be a good fit for a replacement for a 52 inch zero turn riding mower???
@markchidester62393 жыл бұрын
Yes!
@lightrose1003 жыл бұрын
On direct drive prop how many pounds of thrust can the Predator makes and what size prop do you need
@deputyfestus41633 жыл бұрын
Kohler Engine hands down over the other two
@DavidSmith-fr1uz2 жыл бұрын
If you look on landscaping forums, you'll find most are impressed with the Vanguards. They were made in partnership with a Japanese company but now manufacturing has been brought back to the U.S. Hopefully, the quality of the engine will be maintained.
@kenneth9874 Жыл бұрын
The 23 Vanguard is hard to beat
@countryside81223 жыл бұрын
Just wondering if their is a place that carries manifold pipes and flanges so you can adapt it the exhaust layout for your replacement? Also are those vertical or horizontal mount or both?
@ivanavis49372 жыл бұрын
Hi I was wondering where I could get the same Exaust as you have on the predator
@mafosa85192 жыл бұрын
can the kohler EFI be coverted to LG for a generator?.. excellent share!! larry
@chuckstewart73312 жыл бұрын
I have yet to get more than 500hrs, out of the newer Briggs engines without major damage/ issues of some sort , I have numerous kohlers with 750+ hrs to over 1000 hours with no issues . I have not used any of the predator engines .
@DavidSmith-fr1uz2 жыл бұрын
I wouldn't get a Briggs unless it was the Vanguard made in partnership with Daihatsu, a Japanese company.
@kenneth9874 Жыл бұрын
I've put thousands of hours on my vanguard with no issues
@andymartinez35622 жыл бұрын
Hi sir i would like to know if this type of engine are good or even fo small mini bike?
@johntex47514 жыл бұрын
Hey bro my Kohler 14 hp gas engine went out on my Ingersoll rand air compressor what do you think I was going to buy a preditor 22 hp to replace the Kohler also can I install a bullwhip on it
@countryside81224 жыл бұрын
Does briggs have real metal parts or are they still using the plastic flywheels and cams without air pockets in them like their earlier models?
@ayp19383 жыл бұрын
briggs has never used plastic flywheels, they use plastic flywheel fans which is fine but never plastic flywheels, the flywheel has to be metal for the engine to spark
@countryside81223 жыл бұрын
@@ayp1938 Well the the black metal on the 22hp. Poulan Pro I replaced must of been really soft metal. It melted the teeth the where the starter turned the ALL BLACK fiberboard looking flywheel with a very thin metal disk attached to the underside of it. The replacement was all metal and heavy compared to very light one I took off.
@ayp19383 жыл бұрын
@@countryside8122 oh your talking about the ring gear on the flywheel, yeah those are plastic but the flywheel itself isnt
@kenneth9874 Жыл бұрын
It must not be a vanguard, they're 23hp
@Nonameguzzi3 жыл бұрын
How is ur experience with the Vanguard EFI Engines? I Work at an Company that uses the Briggs 22hp EFI Version in 14kva Generators and as far as i know they are Pretty Reliable. At the Carb Version i had an Broken Fuel Pump a few Times^^
@bassheadalex16283 жыл бұрын
I have a vanguard 23 i installed on my john deere 757 that had the Kawasaki 25 i swapped out due to the previous owner blowing a hole through the block. I honestly can say its a good motor for a budget swap...only thing i did different was switch over to an electrical fuel pump due to that motor loves gas and the mechanical pump that was on the motor wasnt pumping enough fuel....other than that its really stout
@REVNUMANEWBERN2 жыл бұрын
WHEN will Harbor Freight Predator bring back their VERTICAL shaft engines???????? I have 7 of the little ones that are WONDERFUL, starts at first pull & have had NO issues for 3 years
@MannyAguilarJr2 жыл бұрын
🔮
@michaelgasperik43192 жыл бұрын
Good info but I was wondering more about the longevity of the predator engine.
@pepitogloria28592 жыл бұрын
how moths po ang predator 22
@paulthompson1654 Жыл бұрын
kohler does not have crank case bearing =worn out throw it out . Briggs have 1 x sleeve bearing 1x ball bearing Briggs have performance rods and pistons All motors require performance accelerator pump carburettor
@apfelsnutz5 ай бұрын
NICE VIDEO...THANKS !
@michiganmagneto3 жыл бұрын
Do you keep the governors on & functioning for these applications?
@LoneStarHovercraft3 жыл бұрын
We normally leave the governors on unless they give us trouble such as surging/hunting
@butchcantara14973 жыл бұрын
Sir how much 40hp vanguard Briggs & stratton we need here in the Philippines! I hope available coz of a lot of people fishermen we need there in the Philippines.
@tylermacconnell2173 жыл бұрын
I’d avoid the Chinese engine based upon principle alone
@michaelmartinez52173 жыл бұрын
Principal now? Or always? Just saying...
@cryptocrush-8233 жыл бұрын
Sure, save now and pay later. What about cost of ownership?
@bryanst.martin71343 жыл бұрын
@3R'sDIY kzbin.info/www/bejne/gnqVmpqKdsmlqZI
@sotm60783 жыл бұрын
Kohler will beat Briggs hands down any day for reliability and economy!! No Predator experience.
@Johnclark3003 жыл бұрын
@@sotm6078 the predator 670 is pure garbage I bought one last year for my go kart and the crank bearing failed and I took it back got my money back then bought a Honda 690
@heliogarciapinto32744 ай бұрын
Bom dia!quanto custa o motor Vanguard? brigaduuu!
@ronelsantiago77742 жыл бұрын
Sir can you give me like that engine,,because there is no available here in the philippines
@maryannematt4729 Жыл бұрын
Hallow bro.give me your price for 18hp v twin vanguard Id like to order one.Thanks
@dlamay3 жыл бұрын
Any idea where you can get those mufflers that you have on the Predator 670cc motor?
@tacomas96023 жыл бұрын
Looks like a custom made header with a old style Briggs screw on muffler I could be wrong
@LoneStarHovercraft3 жыл бұрын
We used to make these for the Predator. Yes, they’re just the old pancake style screw on mufflers you can get for lawnmower engines. We drilled out the threads and welded exhaust tubing to them.
@brennanmiranda98303 жыл бұрын
my predator 670 boggs down after a few hours of running any idea what causes that
@bassheadalex16283 жыл бұрын
If its on a riding mower ive heard the charging system is not the greatest on those predators.
@patrickmckowen29993 жыл бұрын
Great info 👍
@omarhs77112 жыл бұрын
Hello I just need to know where shall i buy like those shipped to my country ? Can you send me a website to email the factory?
@mustafaerkek42633 жыл бұрын
Would be great if you would compare the fuel consumption! I want to buy a vanguard 23 hp but cant find fuel consumption on the internet.Anyone or users can help me,please!The video was great anyway!!!
@JF323043 жыл бұрын
You know why it's hard to find this.... Because nobody cares about fuel economy on such a small engine.
@mustafaerkek42633 жыл бұрын
@@JF32304Thank you very much...
@kenneth9874 Жыл бұрын
They're not hard on fuel
@amigovillabas34403 жыл бұрын
Meron na poba ito sa pilipinas or sa cebu city kasi ang ganda kaso d po ma search sa mga bintahan.
@davesilvia97113 жыл бұрын
pradator is cheepest but works well
@ArieteArmsRAMLITE2 жыл бұрын
He should be on the radio.
@Strickland3253 жыл бұрын
Why no Kawasaki.
@LoneStarHovercraft3 жыл бұрын
Nothing against them, we just haven’t used one on an airdrive yet
@minasan72613 жыл бұрын
Sir,, we're can we get this engine with trusler seller
@REVNUMANEWBERN3 жыл бұрын
Small airboats use these??Never heard of such, I may want to get one of those
@LoneStarHovercraft3 жыл бұрын
Sure do, mostly on small one person airboats. Gotta be a light boat to work well.
@tahminaakther54143 жыл бұрын
Hi sir.I'm Bangladeshi. How can i buy this engine
@CaptainRon19132 ай бұрын
Amazon sell cell phone tripods. Difficult to watch with the camera jerking around. Especially annoying is the one handed mechanic
@ivanavis49372 жыл бұрын
Where did you get the exhaust on the predator
@Larrydavis20264 жыл бұрын
What engine will you recommend if you had too do a engine swap if you had to change out.
@LoneStarHovercraft4 жыл бұрын
Out of these three we like the Kohler best. Predator 22 can do okay too but to get any real power out of it you need to replace the carb.
@jazalessandro30944 жыл бұрын
depends on application,imo,not that I was asked,lol
@racerx63843 жыл бұрын
Can i install a pair of fcr 39 carbs
@urgentcareguy32 жыл бұрын
What if told you that the Commercial Briggs Vanguard was designed by Toyota. Think I'm joking?
@pepepugoy39023 жыл бұрын
like si Vanguard sir.
@botzerdtv4373 жыл бұрын
can i have the predator engine for my boat..love your video
@knockknockwhosthere80553 жыл бұрын
It would be awesome to see one go into a small front wheel drive car maybe something from the 90s I remember there was a company but do not remember the name but they made a 3-cylinder very small compact car Maybe you could make a daily driver out of one and how good would the gas mileage be LOL but seriously why not anything's possible
@chadatkinson32243 жыл бұрын
I believe you're talking a geo metro 3cyl 1 litter.
@flecktards3126 Жыл бұрын
Old comment but I am currently working on putting on of these in a 90s Nissan pickup truck. I am focusing on the details and prep for now before I spend the $$$$ on it. I have perfected my flywheel adapter and I really want to buy an engine right now I just want to wait for an extra paycheck or something. Until then I am researching even more.
@anwarletteanwar99272 жыл бұрын
Pakai pendingin air atau udara??
@hj.supardisupardi93874 жыл бұрын
adakah bodi mesin vangguard 23 hp 2 selinder
@luisrolandotenemazatapia Жыл бұрын
Hol que costó tiene uno
@seamanvlogs19984 жыл бұрын
im interested sir
@erneststorch98443 жыл бұрын
Another thing their is more important thing
@mohdroom59173 жыл бұрын
How much the price
@beverlyscott16483 жыл бұрын
Hey Ben, please tell me where I can find a set of side exhaust for my Predator engine?
@LoneStarHovercraft3 жыл бұрын
We used to make those but stopped because they're much louder than the stock muffler. You can make a set using standard pancake mufflers and pre bent exhaust tubing from places like nr racing