ROADSTER ROADSTAR WIRE WHEELS

Video explaining the unique roadster knock off design on 13x7 72 spoke series 3 roadstar wire wheels

[@Impala1963]

Great video, I had a set of these back in 95 and preferred cause it locked nicely with that center nut, nice to see someone out there still appreciates those wheels they were my favorite

[@lonestarlows]

Yessir. My buddy just resealed these wheels for me. So should put em on my car soon

[@capeman10]

Really nice of you to share your collection and knowledge. Thanks.

[@joserodriguezjr3515]

Bro. Thanks for the video. I just picked up a 1988 CRX with 13x7 100 Spokes. I can’t wait to get these back on the road. They are still wrapped with BFG’s from 1995

[@lonestarlows]

Yes I remember...175 50 13 I think??

[@johnz618]

Are you going leave them on crx

[@mitomr.twiceasnice4358]

I miss my RoadStars, I had a set of 72 spoke all chrome with the gold 2way spinner, had them for almost 2 years and sold them late 99 ($600) to get them la wire KOs that all had just to pound on that knock off, wish I hadn't though. I was using a breaker bar on them RoadStar hubs.

[@RedRocket64]

Good info lonestar 👍 wheels look great 🔥

[@rickyvillagomez5193]

Thanks for the video looking forward to cruising next year already cold as hell up in Washington State but I picked up a pair of 15 x 10 $250 the guy didn't know what he had I was actually looking for some old-school McClain's but I just couldn't pass these up

[@mitomr.twiceasnice4358]

How them RoadStars doing, I miss mine from the 90s. I used a breaker bar to loosen/tighten them.

[@justinbarrell4965]

Those are dope, I had two sets of 15x7’s on my ‘90 5.0 back in ‘96 & ‘97, neither set last more than 3 months before my car was stolen each time, gave up on wires for a few years until Dubs became the new thing and wires were less likely to get stolen, I thought Roadstars were a great value and better than D’s!

[@lonestarlows]

I like the fluted spinners and the eagle chips. They scream 90s. Also the offset. The spinner is pushed out closer to the lip of the dish than any other wire wheel. I prefer them over any wires

[@WarBeardTheRed]

Bringing back memories.

[@lonestarlows]

Yep. 1998 was my first set

[@johnwilliams4326]

I just bought a 83 Fleetwood in the trunk 4 sets of Roadstar rims and adapters, but no spinners, I've searched everywhere for just for the spinners. Is there another alternative for these rims can I use a different set of adapters? How can you point me in the right direction for set of spinners

[@gsus760]

I have a set of gold center 16x9...I guess they need special wheel adapter. Anyway you can help me out?

[@anthonycornejo1382]

I have so roadsters 13” spokes I’m looking for 5 lug universal adapter and spinners as well would you happen to have some

[@anthonyramirez8994]

What's up brother thx for the video I'm looking for 1 adapter 4 100 spoke Roadstars I think they are series 3 they have all the holes universal i need the right side and maybe a knock off i think i have 2 or 3 i got the twisted spoke i was rolling back in the day.lol I don't know where I misplaced it hopefully u can help me out thx and have a blessed rest of your day☝🏾💛🙏🏾

[@Nachoadventures]

Is there any place that makes after market center caps for bolt ons ?

[@menguyen7317]

Nice! Great info.

[@adnanarslan7880]

Looking exactly for these wheels with the fluted 3 wheel bars. Is there any sets for sale?

[@lastatt2025]

I think they were the best looking spokes as well...

[@robertalvarez8630]

Still looking for any 5x5 series 1 large hub accessories

[@gregfong1921]

Can you explain how the locking release mechanism with the square hole works? Thanks.

[@vileasphunk7789]

He did stupid

[@alvarotijerina4578]

Saw your video very cool.. by any chance would you have any right side 2 wing gold knock off spinners.

[@lonestarlows]

None

[@raiderdefendant2225]

Nice my bro I’m looking for some wire wheels I just bought a 63 Ford galaxy 500 do you know any good market places where I can find a good deal for a set ?

[@davidortega2407]

Had triple gold 100 spoke. Roadstars k.o.'s back in the day the only thing I didn't like was the spinner sometimes got stuck on the hub lock. But were always my favorite knock off really nice seeing this vid! Man but when that hub got stuck your fuc__d!

[@lonestarlows]

I'm curious to try my milwaukee fuel m18 impact on the locks and see what it does. That thing has tremendous torque.

[@davidortega2407]

@@lonestarlows wish I had that back then lol...

[@lonestarlows]

Haha me too lol. I got my first set in 1998 when I was 18

[@lalocorrea9110]

Need a set of knock offs as well

[@TheRealMisterChopShop]

I think mine were like 14-80 spoke I believe The thing about it I had a tool that was long like a socket and I used to put the star at the end of it and then the other side fit inside that metal slot where you put that socket you were putting there do you remember they were like gold color

[@lonestarlows]

Yes I remember the tools. I think I have one somewhere

[@lalocorrea9110]

Where can i find adapters for my el camino

[@gabinoibarra9204]

Do you have the right side center piece what the knock off screws on ? Thanks

[@lonestarlows]

I have some yes

[@ernestomartinez3481]

Pretty cool bro I collect old school bolt on Roadster would you happen to have any Center emblems?👍👌👊✌

[@lonestarlows]

I have a lot of them.

[@spencerfarrar6416]

I bought a set of seres 3 rims but didn't realize they were not knock offs. Do you know where I can find hubs?

[@lonestarlows]

I'm lost

[@charles781]

I have some since 1999 but don’t have the knock offs and adapters do you have some for sale or know someone that selling?

[@lonestarlows]

I may have some locks. What series?

[@JoseJuarez-ns9cr]

@Lonestarlows...Hello, I need some insight on some Roadstar wheels. I see some for a 6 lug but I need a 5 lug for an impala. Not sure what series they are, but can I find adapters that are 5 lug same series so that they fit?

[@lonestarlows]

Won't work

[@rudyfernandez3273]

The 15 hole series 3,won't fit onto that rim.

[@amadormartinez4747]

Hey do you have any series 1 5x4.75 adapters. I have a set of 5×4.25 adapters but I am trying to mount these wheels on a gm vehicle.

[@lonestarlows]

I only have the adapters I have for my wheels. Series 1 adapters might be hard to find

[@alvinchavez8343]

do you have a left hand lock for a series one roadstar i need oneto complete my set

[@alvinchavez8343]

or any contact info i can send pics of what i am looking for thank you

[@hihater4834]

@Lonestar lows by any chance you got any adapters for sale 🙏🏼????

[@lonestarlows]

No I dont

[@americosalazar9579]

I would love to find out if the rims I have in hand are roadsters and I've been struggling finding the right adapters and spinners and if you can help me i would really appreciate it. I bought a set of 15×10 for my sons Mazda b2200 but no luck on finding the right adapters.

[@lonestarlows]

Would need a picture of backside of hub. If you are missing adapters locks and spinners, it's going to.be very hard to piece those together or find someone selling a set.

[@americosalazar9579]

@@lonestarlows where do I send the pictures too. I couldn't figure it out to do it on here. But I'm also interested if I have to buy a set of wheels with the same adapters and can swap out rims once in awhile I'm ok with that

[@lonestarlows]

281 832 2856 text them to me

[@SalNavarro-hn1gx]

I have some 14s that I’m looking for spinners for Siri three adapter

[@lonestarlows]

I have a set I'd sell, kind of hard to find.

[@mokotron123]

Does anyone knows where can I get the knock off for this particular wheels? Please advise gentlemen!

[@lonestarlows]

I have a set of faded gold 2 prongs

[@josephbelmaresiii7682]

Great video I think I have series 1 with the 5 nipples I'm looking for a 62 impala version

[@VictorChavez-zi1zq]

Do you have any 2 or 3 wing knock offs for Roadsters for sale?

[@lonestarlows]

I only have left side 3 wing

[@jasond4932]

I bought some rims but they for a 4 lug if I find adapters for a 5 lug would it fit ?

[@lonestarlows]

No

[@jasond4932]

Ok thanks

[@gregfong1921]

I just picked up a set of used roadster roadstar 13x7 100 spoke series 3 wire wheels. On the adapter, it says "Off", "Lock", "On". When loosening/tightening, Should the flat part of the 8mm hex lock be facing inward? If your installing the wheel and you're finished tightening, Do you turn the 8mm hex lock so the flat part faces outward toward the word "Lock"? When loosening, it would be just the opposite. Is this the correct way to install/remove the wheel? And what does "Off" and "On" mean? Just want to make sure I that I'm doing everything correctly.

[@lonestarlows]

I could explain it alot better on a phone call

[@gregfong1921]

@@lonestarlows I also sent you an email to [e-mail] and dm to IG @lonestar lows. Send me an email [e-mail] with your phone number/contact info. Are these the correct email address and IG acct?

[@rudyfernandez3273]

The on & off is only for the tool, when it's set to on you can't put the tool in and when it's set to off you can put the tool in.

[@joserodriguezjr3515]

Trying to find one knockoff. Would you be able to help.

[@lonestarlows]

I dont have any spares anymore. Sold them all

[@wolfcrafter3346]

I cant get them off?

[@nativetag81]

What are the difference between Roadster & Roadstar? I’ve been looking for set. One of my all time favorite wheel! Seem the star stick out more than the other brands.

[@mitomr.twiceasnice4358]

I always thought the Roadster was the bolt on version and RoadStar the hub adapter type version. I had both, always had to take the caps/spinners of the bolt ons and always taking off the decorative spinner on the hub adapter type. Still they were my fav wire wheels til this day.

[@christophermunoz205]

Roadsters by roadstar

[@Whatever-tg7wo]

By far the best lowrider wire wheels built with ko style. The design and look is distinctive. Not to mention the added safety with the true locking design. Would be nice if they started remaking them.

[@tookallyourmoney]

Good info

[@lonestarlows]

I forgot to explain the locking release mechanism with the square hole

[@tookallyourmoney]

@@lonestarlows pt 2 full details

[@playboybunny408]

Sound is very low, I had to turn up my surround sound

[@ugitast]

Excuse me locks for adapters.

[@Imalilkid]

I have a set of series 3 diamond cut spokes that I want to get rebuilt into 5 lug they are 4lug do you think its possible to do so?

[@lonestarlows]

No. Not unless u get different hubs

[@Imalilkid]

@@lonestarlows oh ok do you know where I can get some different hubs?

[@lonestarlows]

U will need adapters to go with those hubs as well. Kind of hard to find

[@Imalilkid]

@@lonestarlows I know someone selling the correct size adapters for a big hub just need to find them and get them rebuilt

[@adrianrivera9526]

I need some

[@wolfthornhawkridge5705]

Why aren’t they reproducing these rims? These remind me of the series 2 Zeniths that had a similar locking hub. Just heard you reference it, lol.

[@lonestarlows]

They are much like series 2. They went out of business. And I dont think there is much of a demand anymore.

[@PLEYHARDER]

I know old vid but if u have how much 3 way fluted need one left and right? Thanks

[@lonestarlows]

I only have left sides

[@PLEYHARDER]

@@lonestarlows how much for left one.

[@lonestarlows]

I'd do 40. They are ok need replate for show. Can send pics

[@PLEYHARDER]

@@lonestarlows email to send pics thanks

[@PLEYHARDER]

@@lonestarlows whats up brother was wandering if u still had the left sides email here in comments for pics THANKS!

[@rudyfernandez3273]

Have you seen the all smooth spinners, I need one.

[@lonestarlows]

I used to have 2 sets. Haven't seen a set for sale in years

[@rudyfernandez3273]

@@lonestarlows I have a set of the two wing, but only 3 of the round one's, lost 1 somehow and can't find them anywhere.

[@Impala1963]

@@rudyfernandez3273 are you interested in selling what you have if you can’t replace what you lost to complete your set and your not gonna be able to use?

[@melonmalone6307]

I found some of those rims and spinners in excellent shape at a junkyard in Fort Worth Texas and I left them there

[@mitomr.twiceasnice4358]

Man, shoulda told Benny of Classic Ride Society channel to get them, he always in the DFW yards.

[@balanis03]

Hows the car coming along????

[@lonestarlows]

I got my firewall pad yesterday and getting radio today.ill make a video

[@rickyramirez1995]

Hey how can I get ahold of you on getting a center knock off

[@lonestarlows]

Text 281 832 2856

[@mathewmaldonado3570]

Nice

[@lonestarlows]

Thanks

[@mathewmaldonado3570]

@@lonestarlows Welcome

[@carloscarmelo2532]

I need to to a Spinners if you have them

[@gladememmott3001]

Look how the chrome plating holds up from 96 compared to the china's. Nothing wrong with Rollin china's either in my book. Whatever gets you rolling use it but you can definitely see a difference between the 2. How do you know the years and series? I have about 5-7 sets of wheels and I don't have a clue how to read them to find out... Can you do a video on that subject sometime maybe? Please? LoL

[@lonestarlows]

U have 5 sets of roadsters? I could do a video on different series. Maybe tomorrow actually

[@gladememmott3001]

@@lonestarlows no no no just different types of older wire wheels lol.. no roadsters... At least I don't think any are.

[@skywarp181]

Where are you getting your rims rebuilt at?

[@lonestarlows]

I've zeus twice. Tami and pat.

[@skywarp181]

@@lonestarlowsawsome. how much did it run approx. I need 2 rims redone. They have bad curb bangs

[@wolfcrafter3346]

how do the locks work do u need a special tool

[@lonestarlows]

Been getting some feedback on this video and I plan to make an updated video showing removal of the wheels

[@wolfcrafter3346]

@@lonestarlows ya I have them on my car I can't get them off and brakes are getting bad

[@DJPAPIC]

Do you have any adapters and kos, for 13s small hub?

[@lonestarlows]

I have 2 sets of locks and several left sided spinners that need rechroming

[@naakaiidinee]

@@lonestarlows I need a couple adapters I need two rights side adapters. And I have 15 holes two lefts with 13 inch

[@lonestarlows]

I dont have extra adapters

[@naakaiidinee]

@@lonestarlows are you selling your roadsters?

[@lonestarlows]

No

[@Theeoriginalcustomriderz]

Any more spinners for sale?

[@lonestarlows]

What are you looking for

[@Rusty_MIJO]

There is this guy down here that goes by kenwood that knows all about these wheels...and has tons of parts. Hard to get a hold of him though

[@lonestarlows]

Sounds like a cool dude

[@adnanarslan7880]

Can you make a connection to him?

[@87chevyrdyderchevyrdyer21]

Can I buy the full set from you

[@lonestarlows]

That's a tall order sir

[@elgoose7061]

Hey bro wheres a good place to get some restored?

[@lonestarlows]

Zeus wire wheel

[@elgoose7061]

@@lonestarlows bet and would you know where Im able to get a replacement hub ? series 3 ?

[@elgoose7061]

No luck there boss would you happen to have a number ?

[@hijodexhango66]

Hi, do you still have those gold spiners ?

[@lonestarlows]

No

[@hijodexhango66]

@@lonestarlows hi, do you have some locks for sale ?

[@lonestarlows]

I might. What series?

[@Turoo142]

Got a set for sale ?

[@lonestarlows]

Not at the moment

[@kevinreeves4945]

I HV a set of 14/7 all gold diamond cut 100 spokes luv them missing medal lock wish I cld find a set off locks for these wheels.

[@lonestarlows]

I have a couple sets of series 3 locks

[@kevinreeves4945]

? How can I receive a new set? How much? $$$ + HV do I receive my merchandise legitimately. SEATTLE WA.

[@kevinreeves4945]

P.S do u HV caps gold or crome?.

[@kevinreeves4945]

I have lock key for roadstarwheels hub lock 🔐 key.

[@kevinreeves4945]

He do I receive merchandise. Without issues.

[@larronwallace6502]

I know it's old but I need some rt side adapters hmu please if you can help.

[@larronwallace6502]

I have the 1996 series #3 14x7 80 spoke with two left side adapters only.

[@lonestarlows]

I have one right side series 3 adapter only.

[@ugitast]

I have the money for those road Star hub locks are they still available asap I have my PayPal card as well

[@lonestarlows]

Sold

[@lalocorrea9110]

I need a set of adapters 5x4.5 can anyone led me in the right direction

[@lonestarlows]

I have new old.stock 3 prongs. Not cheap

[@lalocorrea9110]

@@lonestarlows how much

[@lalocorrea9110]

@@lonestarlows how can i get them location please

[@lonestarlows]

@@lalocorrea9110 sold them

[@josephanthonyrehkopf6003]

I'm looking for some knockoffs by any chance do you have some for sale

[@lonestarlows]

I do have a set but they aren't cheap

[@josephanthonyrehkopf6003]

I wanna send you a pic of the rims I need some for

[@lonestarlows]

@@mattv8919 good luck

[@lastatt2025]

I need a hub for them... please let me know....I need a set too...if possible...

[@lonestarlows]

What do you mean by a hub? A lock?

[@lastatt2025]

@@lonestarlows I will get clarification and get back to you...but I believe you are right

[@lastatt2025]

@@lonestarlows I need 4 locks or the locks to them...I will send you a picture of what I have so you can see what I am in need of...please contact me at 206 502-5277...Kevin ...

[@lastatt2025]

@@lonestarlows 206 581-1963...you can reach me as well...my brother is trying to purchase from you ASAP...

[@DavidRodriguez-gq5ew]

It was a pretty good video but you didn't explain everything ,you left out how the Allen bolt locks in adapter

[@lonestarlows]

Thanks for watching. I have an updated video showing the the roadstars mount and function.

[@skywarp181]

Any chance you have any black and. Chrome eagle chips. Or 3 wing spinners for sale ?

[@lonestarlows]

I dont think I have eagle but I have dozens of tiger chips and I have a set of 3 way chrome that appear to be new old stock

[@skywarp181]

@@lonestarlows would you be willing to sell the 3 ways? Are u on Facebook?

[@skywarp181]

Which ones are the tiger chips?

[@lonestarlows]

No fb. I have IG. Same name

[@skywarp181]

@@lonestarlows oh okay, ill check it out, looking for a easier way to communicate with ya.

[@leogamboa4386]

I am also looking for some knock off for the rockstar Rims.. if the gentleman in the video would like to sell some please contact.

[@lonestarlows]

Alli have are 3 prong left sided

[@naakaiidinee]

I have two lefts 15 holes. And I need two rights. If you have two rights I would like to buy them from you. And I bought it at a garage sale.

[@carloscarmelo2532]

When the hub sees up on you how do you take them off

[@lonestarlows]

Big cheater pipe

[@carloscarmelo2532]

@@lonestarlows I tried that already it looks like it seized up on me

[@lonestarlows]

Stand on it....

[@carloscarmelo2532]

@@lonestarlows I did and I broke for breaker bars

[@lonestarlows]

Man. You can try going to discount tire or an 18 wheeler tire repair and they can use an impact...but I dont think it has as much torque as a breaker bar

[@patrickabeyta3762]

Do you still have knockoffs

[@lonestarlows]

No

[@patrickabeyta3762]

Thank you anyway

[@lonestarlows]

Its gotten pretty hard to find a set of spinners these days

[@franciscobriseno9525]

I seen some same wheels 17/10” so I think they made bigger wheels

[@chevy9256]

I have two sets 13x7 center gold series 1 and 14x7 triple gold series 3

[@lonestarlows]

Interested in selling?

[@naakaiidinee]

Interested in the series 3

[@hobbsnathan]

Do you sell sets

[@lonestarlows]

No

[@hobbsnathan]

@@lonestarlows ok thank you

[@carloscarmelo2532]

I'm looking for some two-way spinners Road Star if anybody has some get ahold of me

[@samdaman5185]

I looking to buy roadster adapters and knock offs hmu

[@samdaman5185]

Samdogg62@ Gmail.com

[@rickybobby1681]

2022 price on those bad boys like 3k easy

[@lonestarlows]

Maybe. I wouldn't sell them.

[@darthfader3049]

I got a set of 13x7 all chrome set for sale

[@lonestarlows]

How much?

[@naakaiidinee]

Interesred

[@robertalvarez8630]

Im looking for series I adapters and locks just got a set with no accessories if anyone has a piece to my puzzle message me ill buy and pay shipping thanks in advance

[@lonestarlows]

Did you get them from offer up?

[@robertalvarez8630]

@@lonestarlows no i got them from Facebook market place

[@AllHail_PHARAOH]

Hey make up to 32" wheels now adays

[@lonestarlows]

Ha

[@AllHail_PHARAOH]

@@lonestarlows yeah they're up there now. But hey man, just wanted to say that great video. Its like anything lowrider related on youtube about 3years ago was nearly impossible to find.... So by you adding this info about the Roadsters ( which I always thought was the same as any knock off as Dayton or Z's) is crazy good. Never knew they were different. Of course they have their own look. That deep dish is very noticeable. But outside of the look, I'm sure many of us "New Generation kids" never knew tgey were so different. So thank you.. Ive literally been search up roadsters online tonight for the last 3hours 😂😂.. Im building a 64 aswell. Yr videos are my go to. So I'm kind of like a student to you

[@ericvest7279]

Iwant2winfreestuff

[@ericvest7279]

Iwantfreestuff

[@rizzo2934]

I have a set of 15x8 LA Wire wheels